3" lead 10g loads

[edenman]

As above I'm looking for some 3" lead 10g loads for a bit of fun clay pigeon dusting.

 

I have remington cases, cx2000 primers and sp10 wads and blue dot powder.

 

If anybody has any loads using the above I'd be very grateful.

 

Thanks

Edenman

[UK fowler]

As above I'm looking for some 3" lead 10g loads for a bit of fun clay pigeon dusting.

 

I have remington cases, cx2000 primers and sp10 wads and blue dot powder.

 

If anybody has any loads using the above I'd be very grateful.

 

Thanks

Edenman

I load 10g shorts for the same reason 43grains of blue dot 42 grams of lead shot sp10 wad I crimp mine as it saves on fillers . PSB2 is a cheaper option as it is half the price of blue dot great for shootin crows too

[Old farrier]

I load 10g shorts for the same reason 43grains of blue dot 42 grams of lead shot sp10 wad I crimp mine as it saves on fillers . PSB2 is a cheaper option as it is half the price of blue dot great for shootin crows too

If you don't mind me asking do you have a non toxic load you could share

I have a 3 inch chambered Damascus nitro proofed 10 bore it was always hard to get cartridges for and retired it to the back of the cabinet when the lead ban come about having seen this ithought I maybe bring her out again

Or if you think it's not a viable gun to relode for I will stick with 3 1/2 steel in the twelve

Many thanks

Of

[UK fowler]

If you don't mind me asking do you have a non toxic load you could share

I have a 3 inch chambered Damascus nitro proofed 10 bore it was always hard to get cartridges for and retired it to the back of the cabinet when the lead ban come about having seen this ithought I maybe bring her out again

Or if you think it's not a viable gun to relode for I will stick with 3 1/2 steel in the twelve

Many thanks

Of

If you can get some bismuth there are a few 27/8" loads that should be just the ticket I will have a dig about and send you some by PM

[Old farrier]

If you can get some bismuth there are a few 27/8" loads that should be just the ticket I will have a dig about and send you some by PM

Many thanks

Of

Edited January 6, 2014 by Old farrier

[FatFreddysCat]

Don't know where you are in the country but Pantiles Vintage Guns in Tunbridge Wells stock 2 5/8 and 2 7/8'' non-toxic 10 bore cartridges.

[Old farrier]

Don't know where you are in the country but Pantiles Vintage Guns in Tunbridge Wells stock 2 5/8 and 2 7/8'' non-toxic 10 bore cartridges.

Many thanks I will give them a call

All the best

Of

[islandgun]

I load a few 3" 10g loads in lead with blue dot and sp 10 wads but cut down 31/2 cases and RTO closure I have a few recipes which might be some use PM me and I'll see if i can send them on

[roughshooter]

I have a hoge excel spread sheet of short 2 7/8" 10 bore loads - drop me your email address and I will forward it to you

REgards

Graham

[Old farrier]

Thank you all for your help

Very much appreciate it

All the best

Of

[Old farrier]

Hi

Big thanks to all that helped with the loading date

Bit nerve racking and a lot more complicated than 222 Reloding

Anyway set about it and got a bit of Reloding equipment ( clay and game ) and ended up with these

Going to try them

Tomorrow

Thanks again for your help

All the best

Of