johnphilip Posted January 17, 2014 Report Share Posted January 17, 2014 ok i have just got the lee load all, how do i workout what the powder measures are they have numbers on them, but i have no idea as to there values. Quote Link to comment Share on other sites More sharing options...
Guest cookoff013 Posted January 17, 2014 Report Share Posted January 17, 2014 Use a scale. What recipe you using? Quote Link to comment Share on other sites More sharing options...
johnphilip Posted January 17, 2014 Author Report Share Posted January 17, 2014 Use a scale. What recipe you using? None yet still waiting for somebits to come.please explain how you measure yours Quote Link to comment Share on other sites More sharing options...
Lord Geordie Posted January 17, 2014 Report Share Posted January 17, 2014 Drop a batch of powder and weigh it! Quote Link to comment Share on other sites More sharing options...
Lord Geordie Posted January 17, 2014 Report Share Posted January 17, 2014 You pop in your bushing! Pop your powder in the container and then drop around 15 lots of powder! Weigh each drop and that should give you a general idea! Alternatively! There should be a online chart for the bushings and powder weights! Quote Link to comment Share on other sites More sharing options...
FatFreddysCat Posted January 17, 2014 Report Share Posted January 17, 2014 Lot of powder bushing data in link below. Depends on what powder you're using. Still worth check weighing a few powder drops just to make sure. http://www.leeprecision.com/cgi-data/instruct/LA1071.pdf Quote Link to comment Share on other sites More sharing options...
johnlewis Posted January 17, 2014 Report Share Posted January 17, 2014 Did you get Operating instructions and charge load guide with the Lee loas all. If not message me and I scan what I had with mine and send them to you Quote Link to comment Share on other sites More sharing options...
johnphilip Posted January 17, 2014 Author Report Share Posted January 17, 2014 Thank you all i have downloaded a manual for the loader, and the link you have just posted has helped. Ok now what sort of scales and what price are we looking at for a set of scales. ?.. Its great on here Quote Link to comment Share on other sites More sharing options...
FatFreddysCat Posted January 17, 2014 Report Share Posted January 17, 2014 Something like this would be fine. http://www.ebay.co.uk/itm/Precision-1mg-Digital-Scale-0-001g-x-30g-Reloading-Powder-Grain-Lab-Jewelry-Gold-/111256799195?pt=UK_Jewellery_Watches_JewelleryBoxes_Supplies_CA&hash=item19e76c07db Quote Link to comment Share on other sites More sharing options...
johnphilip Posted January 17, 2014 Author Report Share Posted January 17, 2014 Something like this would be fine. http://www.ebay.co.uk/itm/Precision-1mg-Digital-Scale-0-001g-x-30g-Reloading-Powder-Grain-Lab-Jewelry-Gold-/111256799195?pt=UK_Jewellery_Watches_JewelleryBoxes_Supplies_CA&hash=item19e76c07db The wife would never fit on that lol. Hey she never comes on here. Does she. ? Thanks they look idea Quote Link to comment Share on other sites More sharing options...
Lord Geordie Posted January 17, 2014 Report Share Posted January 17, 2014 As per the scales mentioned above! Make sure any scales you go for measure grains. I bought a set of ebay also! They are fine for the job, but be sure to use them on a flat surface and tare them after switching on. Quote Link to comment Share on other sites More sharing options...
hodge911 Posted January 18, 2014 Report Share Posted January 18, 2014 I have the chart that comes with the loadall to tell what bush to use for what load etc if you want me to scan it and email it to you mate Quote Link to comment Share on other sites More sharing options...
johnphilip Posted January 18, 2014 Author Report Share Posted January 18, 2014 I have the chart that comes with the loadall to tell what bush to use for what load etc if you want me to scan it and email it to you mate Thanks for that, someone has posted up for me..... Quote Link to comment Share on other sites More sharing options...
Underdog Posted January 20, 2014 Report Share Posted January 20, 2014 If I remember right the numbers on the bushes were the cubic cap' in inches or a decimal of. Stranraer hey, use to be up there all the time, Glen Luce, New Luce, the mull, Artfield fell and Eldrig. Miss the place badly. U Quote Link to comment Share on other sites More sharing options...
johnphilip Posted January 20, 2014 Author Report Share Posted January 20, 2014 If I remember right the numbers on the bushes were the cubic cap' in inches or a decimal of. Stranraer hey, use to be up there all the time, Glen Luce, New Luce, the mull, Artfield fell and Eldrig. Miss the place badly. U hi i moved up here from the north east of england about 10 years ago, i love the peace and quite Quote Link to comment Share on other sites More sharing options...
Underdog Posted January 21, 2014 Report Share Posted January 21, 2014 hi i moved up here from the north east of england about 10 years ago, i love the peace and quitewe nearly did move there too...did you find work easy? U. Quote Link to comment Share on other sites More sharing options...
johnphilip Posted January 21, 2014 Author Report Share Posted January 21, 2014 we nearly did move there too...did you find work easy? U. i always found work hard it go in the way of my hobbies. i had taken early retirment . the wages up here are very poor to be honest. but it is a beautiful area . i tell everyone back home it rains all the time and that keeps them away, so i can keep it to myself . Quote Link to comment Share on other sites More sharing options...
Underdog Posted January 21, 2014 Report Share Posted January 21, 2014 i always found work hard it go in the way of my hobbies. i had taken early retirment . the wages up here are very poor to be honest. but it is a beautiful area . i tell everyone back home it rains all the time and that keeps them away, so i can keep it to myself . lol...smart move. I alway check the weather for up there just out of interest.Have fun sir.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.