jking Posted May 14, 2016 Report Share Posted May 14, 2016 (edited) Hi, I've been trying to work out what restriction my barrels are choked to. I have a 1996 Miroku MK38. I've seen a few posts on forums but none quite match the markings on my barrels as the bottom barrel marking includes text rather than just stars and dashes. Can anyone help identify what my barrels are choked to? I've tried uploading a picture but it won't work, so my top barrel is marked "*", and my bottom barrel is marked "* - PLUS" Cheers Edited May 14, 2016 by jking Quote Link to comment Share on other sites More sharing options...
wj939 Posted May 14, 2016 Report Share Posted May 14, 2016 3/4 and full. Plus is invector plus barrel. (Slightly over bored) Mk38 was originally a trap gun so, that would be standard choking. Browning choke stamps are not the easiest to decipher and don't follow the same logic as other makers. Quote Link to comment Share on other sites More sharing options...
Stonepark Posted May 14, 2016 Report Share Posted May 14, 2016 (edited) Full and imp mod Not uncommon with trap guns. * is full *- is imp mod (3/4) Edited May 14, 2016 by Stonepark Quote Link to comment Share on other sites More sharing options...
jking Posted May 14, 2016 Author Report Share Posted May 14, 2016 Thanks very much guys! I'm a bit disappointed as the dealer I bought the gun from listed it as choked 1/2 and 1/4. I'm using the gun for sporting clays (the higher comb suits me better) so it's not how I would have set the gun up choked wise Quote Link to comment Share on other sites More sharing options...
Gordon R Posted May 14, 2016 Report Share Posted May 14, 2016 It might very well have been altered - quite common. Only way to check is for a gunsmith or someone with a proper bore gauge to check it - not one of the daft drop in the end of your barrel type. Cheap enough to alter if it is heavily chokes, as the choke area is not chrome lined - from memory. Quote Link to comment Share on other sites More sharing options...
jking Posted May 14, 2016 Author Report Share Posted May 14, 2016 That's a good point, it may well have been modified. I'm heading over to the shop I bought it from in a couple of weeks so I'll ask if they can measure the barrels for me there. Cheers for your replies guys. James Quote Link to comment Share on other sites More sharing options...
Stonepark Posted May 14, 2016 Report Share Posted May 14, 2016 Better off to pattern it at 40 yards with your regular cartridges and count pellets, empirical measurements are guides at best. Quote Link to comment Share on other sites More sharing options...
VicW Posted May 14, 2016 Report Share Posted May 14, 2016 I suggest that you forget what choke the gun might be and use it as it is. See how you get on, you may be surprised how well you shoot with it. Vic. Quote Link to comment Share on other sites More sharing options...
Grandalf Posted May 14, 2016 Report Share Posted May 14, 2016 I have a very ancient Miroku 3800S. I had the chokes opened out years ago. So long I can't remember when or what to. As Vic says - Just shoot it and see how you get on. Quote Link to comment Share on other sites More sharing options...
Guest stevo Posted May 14, 2016 Report Share Posted May 14, 2016 (edited) i use a mk 38 fixed choke trapgun ( 3/4 bottom and full top ) for sporting and pigeon shooting , just forget what the chokes are , a change of shells can have just as much impact as changing chokes , i love mine and would not change a thing , as said pattern the thing and see how it does on pellet count at given range , if you find it too tight try using your fav shells but in fibre ( its like opening up one size in choke ) stevo Edited May 14, 2016 by stevo Quote Link to comment Share on other sites More sharing options...
kenholland Posted May 14, 2016 Report Share Posted May 14, 2016 ditto stevo I shot 22 x25 on skeet 3/4 full with my 3800 32 inch when I first had it , so what you say is right . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.