billytheghillie Posted August 17, 2016 Report Share Posted August 17, 2016 I think I have a oil leak on the back axle of my L200. When I look underneath from the rear, in the middle of the axle there is a balloon shape thing which is always wet ( oil?). is this a dear fix? forgive my description of it as I am no motor mechanic. Quote Link to comment Share on other sites More sharing options...
ditchman Posted August 17, 2016 Report Share Posted August 17, 2016 a couple of pics would help................ Quote Link to comment Share on other sites More sharing options...
la bala Posted August 17, 2016 Report Share Posted August 17, 2016 If you need parts i have found Milner Off Road good to deal with. Quote Link to comment Share on other sites More sharing options...
billytheghillie Posted August 17, 2016 Author Report Share Posted August 17, 2016 a couple of pics would help................ that would be impossible, as me and computers are not friends. ( plus im old) Quote Link to comment Share on other sites More sharing options...
Gordon R Posted August 17, 2016 Report Share Posted August 17, 2016 Probably leaking where the prop bolts on. Unless L200s are totally different to other motors, it should be a nice easy fix and cheap. One oil seal. Quote Link to comment Share on other sites More sharing options...
al4x Posted August 17, 2016 Report Share Posted August 17, 2016 Has it been serviced recently? The only time mine leaked a little it hadn't quite had the filler bolt tweaked up enough. If it's the front seal as said try milners but not had a leaking diff yet on one Quote Link to comment Share on other sites More sharing options...
TONY R Posted August 17, 2016 Report Share Posted August 17, 2016 Look on the top of the axle is there a breather pipe is it kinked nipped or crushed somwhow, worth a look. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.