CaptCono Posted December 24, 2016 Report Share Posted December 24, 2016 Apparently my cheek bones won't let me mount my gun properly and I see too much of the rib. Is there an alternative for me other than having major surgery on my gun stock to lower the comb. Higher rib perhaps? Quote Link to comment Share on other sites More sharing options...
Westward Posted December 24, 2016 Report Share Posted December 24, 2016 Too low is always a problem. Too high is really a non-existent "problem" - the eye high of the rib is usually a positive advantage. Work out the geometry. The eye 5mm high at the back of the rib, with the barrel length around a meter throws a pattern only 5cm higher for every 10m out to the target, irrelevant in a pattern around 75cm - and that assumes you sight the target through the bead, which you should not ( the usual cause of guns slowing or stopping is "aiming" through the bead). If you have your eye high, you point the gun using the rib in your lower periphery vision at the place you want the shot load to go, with the target in clear sight above the bead. With the eye high of the rib, the shot load rises slightly to centre the clearly visible target that is viewed above the bead. Raising people's eyes off the rib usually has a dramatic positive impact on the score rate - burying your head and "aiming" through the bead will normally have a negative impact on scores. This post from a very recent thread answers your question exactly. Shotguns aren't rifles. Quote Link to comment Share on other sites More sharing options...
EdSolomons Posted December 24, 2016 Report Share Posted December 24, 2016 Define "not mounting properly" Quote Link to comment Share on other sites More sharing options...
Scully Posted December 24, 2016 Report Share Posted December 24, 2016 Removal of cheek bones? Are you shooting DTL or Sporting? Is your mount consistent? Why did you buy the gun if your sight picture is wrong? Is shaving the comb major surgery? Quote Link to comment Share on other sites More sharing options...
sishyplops Posted December 24, 2016 Report Share Posted December 24, 2016 Define "not mounting properly" Untrue could be the persons neck length, have the gun fitted to you and if necessary have the stock adjusted, or adjustable comb fitted, I like a low comb so has an adjustable comb fitted to it as always walloped my cheek as I like to look down the rib, we are all different and need to shoot as individuals, what works for one will not necessarily work for everyone, go and have it fitted as if it wallops your cheek you will probably tend to pull your cheek off the stock which will of course make it worse Quote Link to comment Share on other sites More sharing options...
Gunman Posted December 24, 2016 Report Share Posted December 24, 2016 A visit to a good gun fitter is required .No standard gun will fit every one so it is a matter of either adapting the gun to you or adapting you to the gun,this may mean re-valuating your stance and mount or having the stock altered to suit. In gun fitting there are often more than one way to solve a problem that may be as simple as adjusting the pitch or toe . Seek professional advice and thats not always a shooting instructor. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted December 24, 2016 Report Share Posted December 24, 2016 Untrue could be the persons neck length, have the gun fitted to you and if necessary have the stock adjusted, or adjustable comb fitted, I like a low comb so has an adjustable comb fitted to it as always walloped my cheek as I like to look down the rib, we are all different and need to shoot as individuals, what works for one will not necessarily work for everyone, go and have it fitted as if it wallops your cheek you will probably tend to pull your cheek off the stock which will of course make it worse Sorry read the post you quoted 'Define' was the key it a question and a vital one not a statement. OP go see a gunfitter or knowledgeable coach Quote Link to comment Share on other sites More sharing options...
sishyplops Posted December 24, 2016 Report Share Posted December 24, 2016 Apologies I read it as definitely not define, I stand corrected Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.