hugh hickey Posted January 23, 2017 Report Share Posted January 23, 2017 Good evening all just got a new Yukon nite vision scope for my 22.250 howa and been trying to zero it but seem to be 12 inch low and I can't move the elevation any more .any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Davyo Posted January 23, 2017 Report Share Posted January 23, 2017 Shims might get you sorted,what's your zero distance? Quote Link to comment Share on other sites More sharing options...
foxbuster Posted January 23, 2017 Report Share Posted January 23, 2017 Hi mate, You'll prob need to get a 20 moa picatinny for your rifle. I've just fitted an 11x mag photon to my 22.250, I was lucky, maxed out elavation as you have done but by pure luck mine was 1" high at 100yrds. My 'crosshairs' sit slightly low on the screen but I'm happy enough with it without having to get a picatinny and different mounts. Google Alan Rhone, I'm sure he'd be able to help with a mounting solution. Quote Link to comment Share on other sites More sharing options...
screamingdead Posted January 23, 2017 Report Share Posted January 23, 2017 I used Sportsmatch UK 2 Piece Double Screw Fully Adjustable Mounts. Quote Link to comment Share on other sites More sharing options...
spandit Posted January 24, 2017 Report Share Posted January 24, 2017 Behind the main bell of the Yukon are 3 screws. Loosen these and you can swivel the front head on a rose joint. Common problem Quote Link to comment Share on other sites More sharing options...
hugh hickey Posted January 24, 2017 Author Report Share Posted January 24, 2017 Thanks for all the replies lads I will keep you all posted as to how I get on Thanks for all the replies lads I will keep you all posted as to how I get on Quote Link to comment Share on other sites More sharing options...
rangey Posted January 24, 2017 Report Share Posted January 24, 2017 got a photon on my 22,250...hawke do a set of shims for a tenner....sorted Quote Link to comment Share on other sites More sharing options...
hugh hickey Posted January 25, 2017 Author Report Share Posted January 25, 2017 Thank you rangey Quote Link to comment Share on other sites More sharing options...
spandit Posted January 25, 2017 Report Share Posted January 25, 2017 You can cut strips of aluminum drinks cans for free Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.