snow white Posted June 20, 2020 Report Share Posted June 20, 2020 Hi lads just put a new spring and seals in my Heanel 303 break barrel it cocks when not in the stock but if I put it back in stock it will not cock I have taken safety out of it in case it was that and took trigger adjustment out but still want cock any i dears. Thanks for looking and all help appreciated tony Quote Link to comment Share on other sites More sharing options...
old'un Posted June 20, 2020 Report Share Posted June 20, 2020 I was going to say spring to long but if it cocks when out of the stock it cant be that, don’t know why it would change but when the barrel is in the fully broke/cocked position is the cocking lever/arm hitting the stock? Quote Link to comment Share on other sites More sharing options...
snow white Posted June 20, 2020 Author Report Share Posted June 20, 2020 I have not checked that but why would it if it was working before I think this going to be one of them head scratchers Quote Link to comment Share on other sites More sharing options...
old'un Posted June 20, 2020 Report Share Posted June 20, 2020 One thing you could try, when the gun is in the stock try winding the two side screws out a couple of turns, also, if there is a screw near the trigger guard try undoing that a couple of turns. Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted June 20, 2020 Report Share Posted June 20, 2020 There's a bolt in the front of the trigger guard that screws up into the action - there should be a spacer between the inside of the stock and the action body - the front bolt goes through it - check that it's still there and hasn't fallen out. Have a look on Chambers Airgun spares site for the schematic drawing of the 303. Quote Link to comment Share on other sites More sharing options...
snow white Posted June 20, 2020 Author Report Share Posted June 20, 2020 Hi Bruno just looked a chambers you are right must of missed it when taking apart I will try packing out with a washer. Thanks for that. Tony Quote Link to comment Share on other sites More sharing options...
Centrepin Posted June 21, 2020 Report Share Posted June 21, 2020 Just rebuilt my Haenel 303, same problem, had to trim the spring unfortunately. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.