wyn Posted January 20, 2021 Report Share Posted January 20, 2021 I've never realy got on with the focusing on my pard.....hand gets in front of the lens or IR and lose what i'm looking at. I bought a couple of plastic mitre gears. stuck one where the focus clamp goes. I had to turn it down loads to get it to fit and go under the IR. This one i've had to glue to the brass ring. The other one i used the original pard weaver mount to hold it. I use a QR pulsar mount to fix the 008 to the rifle. Drilled a hole through the original mount, turned the plastic gear to mesh with the other gear, made an aluminium wheel to operate it all. It still needs a bit of fine tuning and the operating wheel might be a bit over the top ......could be smaller. It's 3/4 of a turn of the wheel to get full travel of the lens. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted January 20, 2021 Report Share Posted January 20, 2021 Hello, interesting project but looks good so far, 👍 Quote Link to comment Share on other sites More sharing options...
Walker570 Posted January 20, 2021 Report Share Posted January 20, 2021 Ingenius Quote Link to comment Share on other sites More sharing options...
oowee Posted January 20, 2021 Report Share Posted January 20, 2021 Brilliant. Quote Link to comment Share on other sites More sharing options...
powler Posted January 23, 2021 Report Share Posted January 23, 2021 Looks good, great thinking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.