The Verminhater Posted August 11, 2021 Report Share Posted August 11, 2021 (edited) Also, the ZB mounting brackets only fit onto the Eaglevision rail, and with the pard on top adds the additional height you mentioned. The ZB mounts won't fit directly to my HW 77k dovetail. Edited August 11, 2021 by The Verminhater Quote Link to comment Share on other sites More sharing options...
B725 Posted August 11, 2021 Author Report Share Posted August 11, 2021 On 09/08/2021 at 04:42, sam triple said: I’ve got a pard 008 good bit of kit WiFi is a pain though unless I’m doing something wrong let us know how you get on with yours , bit of squirrel action with mine I've tried different apps but cannot get any to work Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted August 11, 2021 Report Share Posted August 11, 2021 Also, the ZB mounting brackets only fit onto the Eaglevision rail, and with the pard on top adds the additional height you mentioned. The ZB mounts won't fit directky to my HW 77k dovetail. 1 minute ago, B725 said: I've tried different apps but cannot get any to work Try DashGo via Android app store. Quote Link to comment Share on other sites More sharing options...
B725 Posted August 11, 2021 Author Report Share Posted August 11, 2021 On 09/08/2021 at 08:52, oldypigeonpopper said: Hello, well done 👍 we use and old black and decker workmate to hold rifles, I made the clamp so it sits on a workmate but I can adjust the front ,rear and can tilt it left or right. Quote Link to comment Share on other sites More sharing options...
Rewulf Posted August 11, 2021 Report Share Posted August 11, 2021 1 hour ago, The Verminhater said: When its in this configuration you are having problems ? This would be where you may need a shim , maybe 2. If you are mounting the ZB in between (I know it sounds daft) but you dont have the ZB back to front do you ? This video might help, but a ZB does have a lot of adjustment, and its difficult to understand how you could run out , unless something drastic is wrong. Bore to sightline can be measured by just putting a tape measure at the side and getting a rough idea, in the pic above you look to be about 2.5 inches, which is fine, the ZB will add around another 1-1.5 inches , which isnt terrible. Heres a video about it which might help Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted August 11, 2021 Report Share Posted August 11, 2021 Many thanks for your help Rewulf. Just got in, so I'll read your post. 👍👍 Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted August 11, 2021 Report Share Posted August 11, 2021 1 hour ago, Rewulf said: When its in this configuration you are having problems ? This would be where you may need a shim , maybe 2. If you are mounting the ZB in between (I know it sounds daft) but you dont have the ZB back to front do you ? This video might help, but a ZB does have a lot of adjustment, and its difficult to understand how you could run out , unless something drastic is wrong. Bore to sightline can be measured by just putting a tape measure at the side and getting a rough idea, in the pic above you look to be about 2.5 inches, which is fine, the ZB will add around another 1-1.5 inches , which isnt terrible. Heres a video about it which might help The ZB mount can be mounted either way. I mounted it this way to make it easier to rotate the turrets without stretching. I'll try another shim. However, the ZB instructions state you can loosen the elevation screw (at rear) to allow more. Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted August 11, 2021 Report Share Posted August 11, 2021 2nd shim added, so will check again tommorow. Lucky my next door neighbour owns a field 2 miles down the road I can use to zero on, otherwise I would be 😡 Quote Link to comment Share on other sites More sharing options...
sam triple Posted August 11, 2021 Report Share Posted August 11, 2021 4 hours ago, B725 said: I made the clamp so it sits on a workmate but I can adjust the front ,rear and can tilt it left or right. Ok took pard up the woods this evening away from any item requiring a WiFi signal and it paired straight away ,obviously has the weakest WiFi signal of all around me and was getting the boot , try it Quote Link to comment Share on other sites More sharing options...
B725 Posted August 11, 2021 Author Report Share Posted August 11, 2021 Thanks for that when I get a mo I will try it.👍 Quote Link to comment Share on other sites More sharing options...
B725 Posted August 12, 2021 Author Report Share Posted August 12, 2021 10 hours ago, sam triple said: Ok took pard up the woods this evening away from any item requiring a WiFi signal and it paired straight away ,obviously has the weakest WiFi signal of all around me and was getting the boot , try it Did you use an app and if you did which was it. Quote Link to comment Share on other sites More sharing options...
sam triple Posted August 12, 2021 Report Share Posted August 12, 2021 Just now, B725 said: Did you use an app and if you did which was it. No just wanted to make sure Pard connected to phone over its WiFi Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted August 13, 2021 Report Share Posted August 13, 2021 Two shims at the back seemed to of worked. Went shooting last night, and the NV seems grainy, just wondering if it's connected to the ev setting? Quote Link to comment Share on other sites More sharing options...
Rewulf Posted August 13, 2021 Report Share Posted August 13, 2021 Pull the lens out to focus it, see if that helps, the newer ones have a filter on that makes them a little weak Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted August 13, 2021 Report Share Posted August 13, 2021 36 minutes ago, Rewulf said: Pull the lens out to focus it, see if that helps, the newer ones have a filter on that makes them a little weak Will do. Thanks. 👍 Quote Link to comment Share on other sites More sharing options...
Beagler Posted September 30, 2021 Report Share Posted September 30, 2021 Hi, have two of these and I really like them one on my HW100s. Two shims at the rear. Zero is ok if you fire a shot then put the crosshairs to where you were aiming and the selelect reticle in menu. Move the reticle to where the shot hit using x and y and then select style you can take another shot and adjust again select save when it's ok. some youtube vids online. Quote Link to comment Share on other sites More sharing options...
Beagler Posted September 30, 2021 Report Share Posted September 30, 2021 You can store up to 5 zeros A,B,C,D,E and use these for different pellets. Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted September 30, 2021 Report Share Posted September 30, 2021 Thanks. 👍 Quote Link to comment Share on other sites More sharing options...
Beagler Posted October 3, 2021 Report Share Posted October 3, 2021 On 30/09/2021 at 19:19, The Verminhater said: Thanks. 👍 Just wondered how you got on. Quote Link to comment Share on other sites More sharing options...
The Verminhater Posted October 3, 2021 Report Share Posted October 3, 2021 1 hour ago, Beagler said: Just wondered how you got on. Fine thanks Beagler. It took five shims at the rear,plus one behind the front screw. Reticule not quite central, but acceptable. Great bit of kit though. I fitted a front lens cap cover and side focus lever which also helps. Sometimes I fit a 5"HD screen which also works perfectly with it.👍 Quote Link to comment Share on other sites More sharing options...
Beagler Posted October 3, 2021 Report Share Posted October 3, 2021 2 hours ago, The Verminhater said: Fine thanks Beagler. It took five shims at the rear,plus one behind the front screw. Reticule not quite central, but acceptable. Great bit of kit though. I fitted a front lens cap cover and side focus lever which also helps. Sometimes I fit a 5"HD screen which also works perfectly with it.👍 Good glad your sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.