Scully Posted November 10, 2021 Report Share Posted November 10, 2021 Grand. Cheers. 👍 Quote Link to comment Share on other sites More sharing options...
R_Hawlwy Posted November 10, 2021 Report Share Posted November 10, 2021 Good fun shooting this stand today! Quote Link to comment Share on other sites More sharing options...
matone Posted November 10, 2021 Report Share Posted November 10, 2021 (edited) A Grouse butt is the one thing that would make Swinton complete!! Thimbleby used to have some which were great but sadly de activated them .... Edited November 10, 2021 by matone Quote Link to comment Share on other sites More sharing options...
Agriv8 Posted November 10, 2021 Report Share Posted November 10, 2021 1 hour ago, R_Hawlwy said: Good fun shooting this stand today! That’s the one R_Hawlwy - thank you for posting from my write up from our visit on Monday is on page 1 on this thread ! we had fantastic fun on Monday - A, B and C are from the scaffold D and E the cherry picker C and E were the midi’s IIRC ! The E took some working out and the spec’s had to go on so I could see it ! Can I ask why you estimated the distance ( height ) was to the scaffolding and the cherry picker traps ? not sure I have ShotKam footage as I think I ran out of battery. But for those in the know was clean breaking em with 28g 8s fibres though Muller U1 and U2 in my 725 sporter ! Thanks Again - regards Agriv8 Quote Link to comment Share on other sites More sharing options...
R_Hawlwy Posted November 10, 2021 Report Share Posted November 10, 2021 15 minutes ago, Agriv8 said: That’s the one R_Hawlwy - thank you for posting from my write up from our visit on Monday is on page 1 on this thread ! we had fantastic fun on Monday - A, B and C are from the scaffold D and E the cherry picker C and E were the midi’s IIRC ! The E took some working out and the spec’s had to go on so I could see it ! Can I ask why you estimated the distance ( height ) was to the scaffolding and the cherry picker traps ? not sure I have ShotKam footage as I think I ran out of battery. But for those in the know was clean breaking em with 28g 8s fibres though Muller U1 and U2 in my 725 sporter ! Thanks Again - regards Agriv8 Tough to gauge/height, i know D and E took a good chunk of lead! It was the midi (c) that caught me out! Quote Link to comment Share on other sites More sharing options...
Agriv8 Posted November 10, 2021 Report Share Posted November 10, 2021 25 minutes ago, R_Hawlwy said: Tough to gauge/height, i know D and E took a good chunk of lead! It was the midi (c) that caught me out! IIRC the C was a funny one it took us a while It is high and fast and a way up on bank . Our take was that the point you lock on it’s at full tilt but as it’s a midi it hasn’t got inertia to keep going at that speed So starts dropping so everything points to over leading it which usually goes against the tower ( if you miss you haven’t given it enough lead so add some more ). as I mentioned high incomes are not my favourite ms but even I was chuckling to myself on that stand . mite a blinking good clay stand in a to notch clay ground Agriv8 Quote Link to comment Share on other sites More sharing options...
R_Hawlwy Posted November 10, 2021 Report Share Posted November 10, 2021 6 minutes ago, Agriv8 said: IIRC the C was a funny one it took us a while It is high and fast and a way up on bank . Our take was that the point you lock on it’s at full tilt but as it’s a midi it hasn’t got inertia to keep going at that speed So starts dropping so everything points to over leading it which usually goes against the tower ( if you miss you haven’t given it enough lead so add some more ). as I mentioned high incomes are not my favourite ms but even I was chuckling to myself on that stand . mite a blinking good clay stand in a to notch clay ground Agriv8 I will second that, great fun! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.