Red696 Posted February 6 Report Share Posted February 6 Looking for firing pins for an Ugartechea SxS or for info on someone to make a pair. Mine have mushroomed and bent. Link to comment Share on other sites More sharing options...
Arpee Posted February 7 Report Share Posted February 7 Where are you based? I just had 4 new firing pins and 1 hammer made between 2 separate gunsmiths. 2 firing pins was 140quid and 2 firing pins with a new hammer was 170quid. Link to comment Share on other sites More sharing options...
Gordon R Posted February 7 Report Share Posted February 7 Glad I don't need firing pins. Last time I checked they were £10 each - not that many years ago. Link to comment Share on other sites More sharing options...
enfieldspares Posted February 7 Report Share Posted February 7 Just had the left hand striker sorted on my late father's gun. It needed the tip sorting out so the gun had to be stripped on that side. Cost me £20 by the gunmaker that I use and have used for years. Link to comment Share on other sites More sharing options...
Red696 Posted February 8 Author Report Share Posted February 8 I’ve had quotes from £110 to £140 plus vat for 2 pins and they would all need the complete gun to carry out the work. Nearest one is 90 minute drive each way so with the added cost of fuel I could just call in Bamfords and get a nice AYA no4 thankfully one of the good lads on the airgun forum has offered to have a go at knocking them up. And a very generous gent on here also has given me an option to consider on a spares/repair Link to comment Share on other sites More sharing options...
pigeonbasher oz Posted February 8 Report Share Posted February 8 I hate to say this but with the way side by sides have gone it may be cheaper to buy another for bits. Link to comment Share on other sites More sharing options...
Red696 Posted February 8 Author Report Share Posted February 8 5 hours ago, pigeonbasher oz said: I hate to say this but with the way side by sides have gone it may be cheaper to buy another for bits. hoping to sort that out with a very generous offer from a member on here.. Link to comment Share on other sites More sharing options...
London Best Posted February 8 Report Share Posted February 8 2 hours ago, Red696 said: hoping to sort that out with a very generous offer from a member on here.. Be aware that parts from these kind of guns MAY not fit another of the same make/model. Those guns were bench made individually, not CNC machined and built on a production line like most modern O/U guns. Link to comment Share on other sites More sharing options...
Recommended Posts