mattyb Posted April 27, 2008 Report Share Posted April 27, 2008 I bought my self a beretta silver pigeon about 7 months ago and i have never shot so well, but every time i shoot with it seem to get a bruise on my right cheek i have shot since i was 14 and never had this problem before with any of the other guns i have shot, is there anything i can do to gun to stop this from happening. Thanks in advance Matty Quote Link to comment Share on other sites More sharing options...
Suffolk shooter Posted April 27, 2008 Report Share Posted April 27, 2008 Simple get it fitted to you, and stop lifting your head away from the stock. Failing that stop using howitzer loads for mortar fire SS Quote Link to comment Share on other sites More sharing options...
shaun4860 Posted April 27, 2008 Report Share Posted April 27, 2008 sounds like its to low in the comb...... shaun Quote Link to comment Share on other sites More sharing options...
Catamong Posted April 28, 2008 Report Share Posted April 28, 2008 Try one of these: http://www.sportingtargets.co.uk/index.php...at=+Accessories Cat. Quote Link to comment Share on other sites More sharing options...
Baldrick Posted April 28, 2008 Report Share Posted April 28, 2008 You may want to get a trained gun fitter to check whether the length of pull is too short. Quote Link to comment Share on other sites More sharing options...
Maiden22 Posted April 28, 2008 Report Share Posted April 28, 2008 (edited) . Edited December 5, 2008 by Maiden22 Quote Link to comment Share on other sites More sharing options...
Poacher Posted April 28, 2008 Report Share Posted April 28, 2008 my judgement would be that there isn't enough drop in the stock, so to compensate this your pressing your cheek hard down onto the stock (to get a better line of view on the rib), so when the trigger is pulled you get a knock on the face. Without seeing though its pretty difficult to tell. Quote Link to comment Share on other sites More sharing options...
lewis Posted April 28, 2008 Report Share Posted April 28, 2008 ive got a belter on my face thats going to turn purple tomorow, wasnt used to the gun at all Quote Link to comment Share on other sites More sharing options...
mattyb Posted April 28, 2008 Author Report Share Posted April 28, 2008 Cheers for the advice i did forget to say i had the gun fitted when i bought it and Ive had it 4 bout 7 months and its only recently that Ive started getting a bruise, Ive order one of them pads cat so will see how get on with that hopefully will solve the problem if not then i may have to take gun back and have it re-fitted. Cheers again Matty Quote Link to comment Share on other sites More sharing options...
Maiden22 Posted April 28, 2008 Report Share Posted April 28, 2008 (edited) . Edited December 5, 2008 by Maiden22 Quote Link to comment Share on other sites More sharing options...
Suffolk shooter Posted April 28, 2008 Report Share Posted April 28, 2008 Cheers for the advice i did forget to say i had the gun fitted when i bought it and Ive had it 4 bout 7 months and its only recently that Ive started getting a bruise, Ive order one of them pads cat so will see how get on with that hopefully will solve the problem if not then i may have to take gun back and have it re-fitted. Cheers again Matty Bit of a personal question Matty, but have you lost or gained weight facially as this can cause the fitting of your gun to alter. Just ask Mungler, he has lost weight and by all accounts ended up with a nice welt across the face due to a similar thing after shooting 200 at the Essex Masters recently (Mung, note I said shooting and not hitting ) Still wouldn't do any harm to get the fitting checked again Matty, just to be sure. I have heard of, although never actually met somebody this has happened too, that if you have left the gun when wet in a warm room that the stock can possibly straighten (i.e. undo the cast imparted upon it), when drying out, never immediately noticable, but certainly over a period of time, and bearing in mind we have just come out of the winter months where you will have had the heating on Just a possibility??? SS Quote Link to comment Share on other sites More sharing options...
shaun4860 Posted April 29, 2008 Report Share Posted April 29, 2008 (edited) Cheers for the advice i did forget to say i had the gun fitted when i bought it and Ive had it 4 bout 7 months and its only recently that Ive started getting a bruise, Ive order one of them pads cat so will see how get on with that hopefully will solve the problem if not then i may have to take gun back and have it re-fitted. Cheers again Matty Bit of a personal question Matty, but have you lost or gained weight facially as this can cause the fitting of your gun to alter. Just ask Mungler, he has lost weight and by all accounts ended up with a nice welt across the face due to a similar thing after shooting 200 at the Essex Masters recently (Mung, note I said shooting and not hitting ) Still wouldn't do any harm to get the fitting checked again Matty, just to be sure. I have heard of, although never actually met somebody this has happened too, that if you have left the gun when wet in a warm room that the stock can possibly straighten (i.e. undo the cast imparted upon it), when drying out, never immediately noticable, but certainly over a period of time, and bearing in mind we have just come out of the winter months where you will have had the heating on Just a possibility??? SS same thing happened to me with the weight thing... smacked me all over the place.... Edited April 29, 2008 by shaun4860 Quote Link to comment Share on other sites More sharing options...
the last engineer Posted April 29, 2008 Report Share Posted April 29, 2008 my judgement would be that there isn't enough drop in the stock, so to compensate this your pressing your cheek hard down onto the stock (to get a better line of view on the rib), so when the trigger is pulled you get a knock on the face. Without seeing though its pretty difficult to tell. good call from poacher, sounds like a heavy press into a high comb is hitting you back, how much rib do you see?? edit, this idiot hit the wrong button, take a look at the amount of rib, it should have a small amount of rise, if your seeing to much you will try to compensate by driving your nut on the stock, hence the heavy hitting. SS has asked a very valid point, if the gun fit before with no hit, what has happened since. Martin Quote Link to comment Share on other sites More sharing options...
mattyb Posted April 29, 2008 Author Report Share Posted April 29, 2008 Again cheers for all the advice and i have put a bit of weight on my face so possible could be this, Ive got next week off work so hopefully will be getting plenty shooting in and will try the pad out and see how that goes and if not i will have it fitted again and that should cure the problem. Many Thanks Matty Quote Link to comment Share on other sites More sharing options...
the last engineer Posted April 29, 2008 Report Share Posted April 29, 2008 i dont think adding a pad will work, if as you say you have added weight the stock will be pushed lower, this makes you drive your head in harder, adding material is not the answer, if your stock has a drop in comb not a parralel try moving your face rearward from normal position, this will answer a few questions immediatley, when you move back does the rib dissapear ?? does your face pressure reduce? if yes to both get the file out. Martin Quote Link to comment Share on other sites More sharing options...
Suffolk shooter Posted April 29, 2008 Report Share Posted April 29, 2008 Surely Martin, if he takes the gun to check fit, they can put drop on the stock if thats what is required and don't need to FILE!!!. Cor imagine the bruise you'd get if you din't finish that properly. SS Quote Link to comment Share on other sites More sharing options...
the last engineer Posted April 29, 2008 Report Share Posted April 29, 2008 always the literal one SS i'm sure a good fitter would be able to take care of it, maybe LB or another suitable mechanic hot oil ,skill and patience required, to slow for me, out with the chainsaw. if too much add bondo and file again. nothing like a few splinters to make you aware of the wood on wood fit SS you'd be suprised how little needs to be taken off in some cases though, one of the worst ive seen are the cynergy's talk about high comb, a lot of the ones ive seen have had a 1/4" chopped down. Martin. Quote Link to comment Share on other sites More sharing options...
2shots Posted April 29, 2008 Report Share Posted April 29, 2008 Had a gun fit around ten years ago and the guy that did it said the fit was only suitable for the clothing worn at the fitting session, because of his measurements being accurate, so if you change your gear the gun is classed as out of fit,my measurements were took wearing a skeet vest with t shirt under, so when you put a thick warm coat on or lose or gain weight the fit needs to be adjusted. He reccomended using different butt pads for this,but nothing can be done about the various bends and twists he puts in the stock, unless you call back for a refit but at the price Ill keep the cash thanks.He reckoned most of his customers come back for a refit around every 2 years or so and are mostly game shooters that wear virtually the same clothing half a dozen times a year. Quote Link to comment Share on other sites More sharing options...
Suffolk shooter Posted April 29, 2008 Report Share Posted April 29, 2008 I only paid £30 to get the stock cast to fit me 2shots by Robert Radcliffe of Colchester, so if it means that in a couple of years time I have to do it again, it's not bad value. SS Martin, I was only joking about the filing. Now where is my chisel and Wet & Dry.................................................... SS Quote Link to comment Share on other sites More sharing options...
2shots Posted April 29, 2008 Report Share Posted April 29, 2008 I only paid £30 to get the stock cast to fit me 2shots by Robert Radcliffe of Colchester, so if it means that in a couple of years time I have to do it again, it's not bad value. SS Martin, I was only joking about the filing. Now where is my chisel and Wet & Dry.................................................... SS Extremely cheap I paid £180 in 1997 when I was right into it and a mate recently paid £120 just to have his measurements done, by a guy in northumberland, the work is going to cost another £160, I think thats for an extention to the stock and extra cast,Im shooting with him on sunday so Ill tell him to look around for prices, as far as Im aware this guy is the only one around here that people say has the right gear to do it properly. Quote Link to comment Share on other sites More sharing options...
Suffolk shooter Posted May 2, 2008 Report Share Posted May 2, 2008 He cast the stock for me using oil an dheat lamp, so he told me. And I found the reciept the other day I lied it was £35.00 This also involved a trip to their shooting ground with the try gun, measurements done, gun taken there and then and sorted within a week. £120 just for a fitting, thats daylight robbery. MAybe others can tell us what they are paying to have fittings done. Dependant on Gun/Wood quality I would say, but even so I believe Jason Harris of Trulock and Harris (Framlingham) wrote in Sporting gun that between £30 and £65 dependant on whats needed. I know Richardsons of Halesworth, didn't charge a friend of mine to fit his gun when he brought it from them. They simply took the measurements there and then, did what they had to to the gun and gave him a ring to collect it. All part of the service they said. SS Quote Link to comment Share on other sites More sharing options...
Catamong Posted May 2, 2008 Report Share Posted May 2, 2008 A good friend of mine used a Surform plane to increase the drop on the stock of his 682, the stock looked a real mess afterwards, still, it obviously worked for him, he went on to win the British Open at High Lodge in 1992. Cat. Quote Link to comment Share on other sites More sharing options...
Cosd Posted May 2, 2008 Report Share Posted May 2, 2008 I'm no expert, but watching a shooting DVD last night, "the expert" on there was using a brand new gun and he mentioned his face bruising up; and that he would look at reducing the comb of the gun. It wasn't an adjustable comb so I presume a gunsmith would shave it down...... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.