smiiithy Posted November 16, 2009 Report Share Posted November 16, 2009 I got the batteries and charger Colster got, so Colster I wouldn't recommend using them - or any body else. I think I'll just bite the bullet and get a replacement charger but will the existing batteries work with a 3V charger or am I best off buying both? Cheers, Mike I got the batteries and charger from DE too QUOTE 00722 LIR 3.6V CR123A Batteries (2-Pack) x 1 Shipped $3.28 - 00936 DSD 18650 CR123A Charger Black x 1 Shipped $6.71 - Been out with it tonight and it works a treat. I use a Lenser H7 headtorch for stalking then when I spot the eyes, stalk in a bit, kill the light from the head torch and then use the gun lamp to target and shoot. It will also stop bunnies that are running if you flick it off then move it in front of them and turn it on again. Quote Link to comment Share on other sites More sharing options...
Colster Posted November 16, 2009 Report Share Posted November 16, 2009 Mine seems ok so far, have to admit I haven't used it that much yet but had it out a few times. The torch I got does say it's rated up to 8.4V so maybe ok on that front. Quote Link to comment Share on other sites More sharing options...
smiiithy Posted November 16, 2009 Report Share Posted November 16, 2009 (edited) Mine seems ok so far, have to admit I haven't used it that much yet but had it out a few times. The torch I got does say it's rated up to 8.4V so maybe ok on that front. That's what I thought, but maybe that's not for the CR123's as they are not protected? I wonder if they genuinely sent us exactly the same SKU's As Mick mentioned they sometimes send a better model. I ordered the batteries and charger at the same time and my charger turned up weeks later. Would you be so kind to check what your charger says on the back compared to mine? the back of my battery charger it says:"DSD Charger for 16340 (CR123A)18650 & 17670 Li-ion Battery AC:110V-240V 50-60HZ DC5.5V/450mA" Edited November 16, 2009 by smiiithy Quote Link to comment Share on other sites More sharing options...
Colster Posted November 16, 2009 Report Share Posted November 16, 2009 That's what I thought, but maybe that's not for the CR123's as they are not protected? I wonder if they genuinely sent us exactly the same SKU's As Mick mentioned they sometimes send a better model. I ordered the batteries and charger at the same time and my charger turned up weeks later. Would you be so kind to check what your charger says on the back compared to mine? It's exactly the same as that, mate Quote Link to comment Share on other sites More sharing options...
smiiithy Posted November 16, 2009 Report Share Posted November 16, 2009 Thanks for that. Am I right in thinking your using the 00722 LIR 3.6V CR123A Batteries (2-Pack)? I'm at work at the minute but to memeory they said 3.6V 1000mAh on the side not 800mAh, but this shouldn't effect the voltage. Also if your using those did you charge them for a couple of hours at a time? Quote Link to comment Share on other sites More sharing options...
Colster Posted November 16, 2009 Report Share Posted November 16, 2009 Thanks for that. Am I right in thinking your using the 00722 LIR 3.6V CR123A Batteries (2-Pack)? I'm at work at the minute but to memeory they said 3.6V 1000mAh on the side not 800mAh, but this shouldn't effect the voltage. Also if your using those did you charge them for a couple of hours at a time? You're exactly right, they're the ones. The photo on DE's site says 800mAh but mine say 1000mAh on them. I charge them until the charger shuts off but I would guess 2 hours is about right. Quote Link to comment Share on other sites More sharing options...
smiiithy Posted November 16, 2009 Report Share Posted November 16, 2009 I wonder why mine have gone fubar and yours seems to be going OK then I'm now thinking maybe the batteries are compatible but faulty, especially if yours is working fine and we have the exact same set-up. Before the torch started working again I wrote back to DE explaining that the return airmail cost would be above 30% of the item price and as per their returns policy I'd like a refund or replacement without returning the item but haven’t received a response. Think I’m going to take Mick’s advice and just get the other charger and batteries: I'd be tempted to contact DX and see if you can swap them out, or bite the bullet and get the charger and cells I use. Worst case it'd cost another 10-12 bucks. What a faff for the sake of a bit of bunny bashing :blink: Quote Link to comment Share on other sites More sharing options...
mick miller Posted November 16, 2009 Report Share Posted November 16, 2009 I have had a couple of duff cells from DX before, they were protected ones though. Couldn't get them to work whatsoever. You may be alright charging those cells at 3.0v I couldn't say for certain without sticking them on a multimeter. Know anyone with a multimeter? Then you could work out if they are duffers or not. Quote Link to comment Share on other sites More sharing options...
smiiithy Posted November 16, 2009 Report Share Posted November 16, 2009 I've got a cheapy universal tester but I've only ever used it for AA and AAA :blink: I'd just like to mention anyone considering the Mick Miller lamping set-up (as it's now to be known) if I had bought the correct batteries and charger in the first place I'd probably have a nice working lamp and they do work well. Quote Link to comment Share on other sites More sharing options...
Colster Posted November 16, 2009 Report Share Posted November 16, 2009 I've got a cheapy universal tester but I've only ever used it for AA and AAA :blink: I'd just like to mention anyone considering the Mick Miller lamping set-up (as it's now to be known) if I had bought the correct batteries and charger in the first place I'd probably have a nice working lamp and they do work well. Couldn't see if this had been suggested but is it possible the Romisen is less voltage tolerant than the Ultrafire, on DE site it just says 3.8V for the Romisen whereas the UltraFire WF-501B says Voltage input range: 3V~8.4V Quote Link to comment Share on other sites More sharing options...
mick miller Posted November 16, 2009 Report Share Posted November 16, 2009 Its entirely possible that that is the case. Although the latest Romisen I have seems especially voltage tolerant, perhaps its just that model? Quote Link to comment Share on other sites More sharing options...
Dirtboy Posted November 17, 2009 Report Share Posted November 17, 2009 (edited) Wow top thread, just what I have been looking at buying and all the mags seemed to be a lot of money for what is in fact a torch! But after reading the thread I am a tad lost !! Could someone list the part numbers for each item of the final/prefected set up please - Mick seems to be the bpoard's " El-Torcho " so if you get five mins mate :wink: Also guys what the delivery time like from order ?? Cheers Sorry just seen this on DX http://www.dealextreme.com/details.dx/sku.12000 - cant do that swish insert link as "Click Me " text ! would these be better than the velcro ? Edited November 17, 2009 by Dirtboy Quote Link to comment Share on other sites More sharing options...
Tobyb525 Posted November 17, 2009 Report Share Posted November 17, 2009 For airgun ranges you seriously can't beat a 'lead lenser' Wow top thread, just what I have been looking at buying and all the mags seemed to be a lot of money for what is in fact a torch! But after reading the thread I am a tad lost !! Could someone list the part numbers for each item of the final/prefected set up please - Mick seems to be the bpoard's " El-Torcho " so if you get five mins mate :wink: Also guys what the delivery time like from order ?? Cheers Sorry just seen this on DX http://www.dealextreme.com/details.dx/sku.12000 - cant do that swish insert link as "Click Me " text ! would these be better than the velcro ? Quote Link to comment Share on other sites More sharing options...
Colster Posted November 18, 2009 Report Share Posted November 18, 2009 Sorry just seen this on DX http://www.dealextreme.com/details.dx/sku.12000 - cant do that swish insert link as "Click Me " text ! would these be better than the velcro ? Those are velcro but I find them fine, you can also leave them on the gun if space in your slip is a problem Quote Link to comment Share on other sites More sharing options...
smiiithy Posted January 23, 2010 Report Share Posted January 23, 2010 My replacement charger and batteries finally came yesterday. Guess I'll use the 3v mode Quote Link to comment Share on other sites More sharing options...
smiiithy Posted March 5, 2011 Report Share Posted March 5, 2011 This is an old thread but I am wondering if anybody has found a mount to use a small toch such as the Romisen RC-M4 3V~8V Cree 1-Mode Flashlight mounted to a .410 shotgun? I already have the Superfire Gun Mount Pressure Pad. If anybody is looking at this thread for the first time I would recommend the following: Romisen RC-M4 3V~8V Cree 1-Mode Flashlight Batteries Charger Pressure switch Quote Link to comment Share on other sites More sharing options...
TaxiDriver Posted March 6, 2011 Report Share Posted March 6, 2011 have none of you had to pay customs duty/import tax or vat ? Quote Link to comment Share on other sites More sharing options...
TaxiDriver Posted March 6, 2011 Report Share Posted March 6, 2011 have none of you had to pay customs duty/import tax or vat ? Quote Link to comment Share on other sites More sharing options...
UKPoacher Posted March 6, 2011 Report Share Posted March 6, 2011 That's the problem with buying from abroad. I think the limit is £19 these days and aything over can attract import duty on the combined total of items plus postage and then they add Royal Mail's extortionate handling charges. Quote Link to comment Share on other sites More sharing options...
TaxiDriver Posted March 10, 2011 Report Share Posted March 10, 2011 I've seen this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280640958019&ssPageName=STRK:MEWAX:IT#ht_706wt_1139 on flea bay, wonder how it might compare to RFD's offerings? Quote Link to comment Share on other sites More sharing options...
smiiithy Posted March 10, 2011 Report Share Posted March 10, 2011 No tax, I think they label them as a gift but not sure. I've recently bought a Cluson Lazer-Lite Lamp LA4 second hand and looking to find a way to mount it to my silenced .410 which has a rather chunky barrel and possibly also mounting it to the air rifle now and again. Quote Link to comment Share on other sites More sharing options...
TaxiDriver Posted March 11, 2011 Report Share Posted March 11, 2011 I've seen this http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280640958019&ssPageName=STRK:MEWAX:IT#ht_706wt_1139 on flea bay, wonder how it might compare to RFD's offerings? Nobody had a look see ? Quote Link to comment Share on other sites More sharing options...
TaxiDriver Posted March 18, 2011 Report Share Posted March 18, 2011 Have just received my new red led torch and velcro mounting, batteries and pressure switch, and normal end cap swich, couple of velco bits, good price, delivered next day, looks promising. NOW I need me some wabbits Aww c'mon mr bunny wabbit (Elmer Fud styli) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.