Shooting Tom Posted November 25, 2011 Report Share Posted November 25, 2011 Hi I have a browning 424 over and under, does any one know where i could find a extension pad for the butt i would need about 1 inch +. does anyone now any good sites for these things. Thanks Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted November 25, 2011 Report Share Posted November 25, 2011 You could fit a slip-on butt pad with a 1" block of wood etc fitted inside it. I did this when using my .243 rifle with NV. It may not look pretty, but it works, and is'nt expensive. Quote Link to comment Share on other sites More sharing options...
Shooting Tom Posted November 25, 2011 Author Report Share Posted November 25, 2011 (edited) i do have a slip on pad, i just find this moves when shoot, just want something solid that doesnt slip around. Edited November 25, 2011 by Shooting Tom Quote Link to comment Share on other sites More sharing options...
HDAV Posted November 25, 2011 Report Share Posted November 25, 2011 There are rubber screw in fit ones that griping to fit the stock a proper gunsmith is best to advise has it got the standard plastic buttplate at present? Quote Link to comment Share on other sites More sharing options...
Shooting Tom Posted November 25, 2011 Author Report Share Posted November 25, 2011 It does have the plastic standard one. Quote Link to comment Share on other sites More sharing options...
chrispti Posted November 25, 2011 Report Share Posted November 25, 2011 Have a look at ''limb saver'' recoil pads Quote Link to comment Share on other sites More sharing options...
Gordon R Posted November 25, 2011 Report Share Posted November 25, 2011 There is a Graco recoil device on E*ay at the moment. It you don't want to use the recoil part - it can be locked, but they are a useful way of extending a stock - with a fair margin of length adjustment. Quote Link to comment Share on other sites More sharing options...
Dave T Posted November 25, 2011 Report Share Posted November 25, 2011 Hi there, My stock had to be extended quite a bit, but rather than have a lump of different wood (or ebonite), I decided to go with a Graco (fitted by Simon @ Doveridge) - I haven't regretted it for a second They aren't cheap though Quote Link to comment Share on other sites More sharing options...
Mike525steel Posted November 25, 2011 Report Share Posted November 25, 2011 I shoot my semi with a limb saver and it's fine you need to buy the right one for the gun and it's a nice right fit Quote Link to comment Share on other sites More sharing options...
Shooting Tom Posted November 27, 2011 Author Report Share Posted November 27, 2011 ok thanks for all of the advise Quote Link to comment Share on other sites More sharing options...
Sco77w Posted November 27, 2011 Report Share Posted November 27, 2011 There is a Graco recoil device on E*ay at the moment. It you don't want to use the recoil part - it can be locked, but they are a useful way of extending a stock - with a fair margin of length adjustment. Shhhhhhhh! I'm watching that and was hoping for a bargain. Quote Link to comment Share on other sites More sharing options...
Shooting Tom Posted November 27, 2011 Author Report Share Posted November 27, 2011 Been looking for a long time and still cant find one that will match my BROWNING 425, could anyone give me a link to a website with recoil pads fitting this gun. thanks Quote Link to comment Share on other sites More sharing options...
HDAV Posted January 1, 2012 Report Share Posted January 1, 2012 (edited) Been looking for a long time and still cant find one that will match my BROWNING 425, could anyone give me a link to a website with recoil pads fitting this gun. thanks Best to get one ground to size any smith will do it or Isis offer a fitting service for a fee (by posting outline to them) better to get one fitted to size lots more choice in thinkness the thin Isis is probably closest to the original plastic browning one to get 1" extension I would get a kick eeze fitted go up to 29mm http://www.kickeezproducts.com/pre-fit-recoil-pads.php get the template and try it on your stock Edited January 1, 2012 by HDAV Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.