rickardo Posted December 25, 2011 Report Share Posted December 25, 2011 hi i went to use my lanrona o/u broke the gun put the cartridges in now it wont close even unloaded.. its like something is jamming it but ive looked and cant see what any ideas? thanks rickardo Quote Link to comment Share on other sites More sharing options...
gonk69 Posted December 25, 2011 Report Share Posted December 25, 2011 take off the fore end fella split the gun quick clean and reasemble, see if that works, cheers matt Quote Link to comment Share on other sites More sharing options...
Paul T Posted December 25, 2011 Report Share Posted December 25, 2011 Could be a number of things from ejectors/extractors to a broken firing pin. Just take the gun apart and have a good look for anything amiss. Have a scan through the Jack Rowe vids I've just posted in this section - something in there might help Quote Link to comment Share on other sites More sharing options...
Cannon Posted December 25, 2011 Report Share Posted December 25, 2011 Check the release lever hasn't engaged Quote Link to comment Share on other sites More sharing options...
Hamster Posted December 25, 2011 Report Share Posted December 25, 2011 Check the release lever hasn't engaged :yes: Seen it a dozen times. Push lever to the right till you hear it click. This happens with many different makes by the way. Quote Link to comment Share on other sites More sharing options...
humperdingle Posted December 25, 2011 Report Share Posted December 25, 2011 Check the release lever hasn't engaged Yep, just slide the lever over and close the gun. Will probably work. Quote Link to comment Share on other sites More sharing options...
lewj Posted December 25, 2011 Report Share Posted December 25, 2011 (edited) somthing similar happend at the last clay shoot i went to and this lasses 20 bore wouldnt close the ejector thing came to far back and simply needed pushed forward and problem fixed Edited December 25, 2011 by lewj Quote Link to comment Share on other sites More sharing options...
rickardo Posted December 25, 2011 Author Report Share Posted December 25, 2011 ive taken gun apart and everything seems to be working fine but with the barrells in the lever dont go back to centre position.. Quote Link to comment Share on other sites More sharing options...
matth12321 Posted December 25, 2011 Report Share Posted December 25, 2011 If in doubt give it a clout! tried being a bit more brutal? shut it with a bit of force! Quote Link to comment Share on other sites More sharing options...
rickardo Posted December 25, 2011 Author Report Share Posted December 25, 2011 (edited) Could be a number of things from ejectors/extractors to a broken firing pin. Just take the gun apart and have a good look for anything amiss. Have a scan through the Jack Rowe vids I've just posted in this section - something in there might help thanks guys, paul u was right just took it apart and the top fireing pin has broken taken it out and it now closes as normal.. thanks again Edited December 26, 2011 by rickardo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.