Jump to content

Solar panels ...could you run a house


jasper3
 Share

Recommended Posts

as i said i have two options... (at the moment) the dearest option is actually looking to be the cheapest option, it already has electric, water and septic tank... its also smaller in length by 8 mts... and already has roof tiles as opposed to tin roof (no trusses on the cheap one)

 

the one thing i have been looking at is insulation... kingspan looks good although expensive...

 

you have given me plenty to research,,for that i thank you all :good:

 

Jasp

Link to comment
Share on other sites

We build and erect houses up and down the country which have no other heating means other than a wood burning stove and photo voltaics. You can add radiators of whatever other means you prefer, but it isn't necessary as they are Tradis panel built and so well insulated via warmcel further heating isn't needed. Heat recovery systems are also incorporated.

We can build a four bedroom house in the factory in six weeks, take it on site and erect it in three to four days, after which your counter battens can go on and slating/ tiling can start.

Have built some massive schools for East Lothian council and Parliament buildings on the Isle of Man, plus many many private houses, the latter of which have extremely small utilities bills.

Link to comment
Share on other sites

Scotframe by any chance Scully :)

Cant say I'm familiar with the name jasper3; we construct our Tradis from wooden 'I'-beams made by Swelite in Sweden,where they have been constructing buidings in this method for donkies years.

Warmcel is a fire -retardent (stings a bit but is very good at stopping bleeding also!) pulped paper produced by Excel which we pump into the panels under pressure.

had you considered stick-building walls and cailings from 150mm 'I'-beams inside your existing barn?We have done this in the past.It would obviously mean your internal dimensions would decrease by 150mm plus whatever render/cladding you used internally,and wouldn't be cheap,but the cost would be offset by drastically reduced heating bills over the years to come.

Typical heating bills from four houses we built locally,which are fully insulated 400mm roof beams,300 walls,open plan four bedroom houses with only a wood burner as heating,photo voltaics and heat recovery systems are around £160 per annum.What the panels produce over and above requirements is sold back to the grid.

You can google Tradis,Excel,Warmcel and Swelite.

The reason schools specify our spec's is that the utilities are paid for by the taxpayer;if housing associatons had to foot the bills they would build houses to this spec' also.We are now dipping our toes into passive housing.

Link to comment
Share on other sites

Cant say I'm familiar with the name jasper3; we construct our Tradis from wooden 'I'-beams made by Swelite in Sweden,where they have been constructing buidings in this method for donkies years.

Warmcel is a fire -retardent (stings a bit but is very good at stopping bleeding also!) pulped paper produced by Excel which we pump into the panels under pressure.

had you considered stick-building walls and cailings from 150mm 'I'-beams inside your existing barn?We have done this in the past.It would obviously mean your internal dimensions would decrease by 150mm plus whatever render/cladding you used internally,and wouldn't be cheap,but the cost would be offset by drastically reduced heating bills over the years to come.

Typical heating bills from four houses we built locally,which are fully insulated 400mm roof beams,300 walls,open plan four bedroom houses with only a wood burner as heating,photo voltaics and heat recovery systems are around £160 per annum.What the panels produce over and above requirements is sold back to the grid.

You can google Tradis,Excel,Warmcel and Swelite.

The reason schools specify our spec's is that the utilities are paid for by the taxpayer;if housing associatons had to foot the bills they would build houses to this spec' also.We are now dipping our toes into passive housing.

 

Do you have plans for these that I could use to make an outline planning application to build in my paddock? I'd be more interested in a bungalow than a house if available.

 

Cheers,

 

Rooster

Link to comment
Share on other sites

 

Do you have plans for these that I could use to make an outline planning application to build in my paddock? I'd be more interested in a bungalow than a house if available.

 

Cheers,

 

Rooster

Will see if I can find some architects drawings regarding the above houses,including panel drawings.

Link to comment
Share on other sites

Cant say I'm familiar with the name jasper3; we construct our Tradis from wooden 'I'-beams made by Swelite in Sweden,where they have been constructing buidings in this method for donkies years.

Warmcel is a fire -retardent (stings a bit but is very good at stopping bleeding also!) pulped paper produced by Excel which we pump into the panels under pressure.

had you considered stick-building walls and cailings from 150mm 'I'-beams inside your existing barn?We have done this in the past.It would obviously mean your internal dimensions would decrease by 150mm plus whatever render/cladding you used internally,and wouldn't be cheap,but the cost would be offset by drastically reduced heating bills over the years to come.

Typical heating bills from four houses we built locally,which are fully insulated 400mm roof beams,300 walls,open plan four bedroom houses with only a wood burner as heating,photo voltaics and heat recovery systems are around £160 per annum.What the panels produce over and above requirements is sold back to the grid.

You can google Tradis,Excel,Warmcel and Swelite.

The reason schools specify our spec's is that the utilities are paid for by the taxpayer;if housing associatons had to foot the bills they would build houses to this spec' also.We are now dipping our toes into passive housing.

Blimey round here you would only get 2 loads of logs for £160 if you were lucky. Or is that all they are burning?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...