Jump to content

fibre v plastic


Recommended Posts

Guest cookoff013

test needs to be done at different distances with about 50 shots per condition for real meaning stats.

 

however some shells / fibre and plastic variants produce light and day differences...

 

i have seen a test by field sports, and wondered why not test more.

 

i have minimal testing experiences with patterning, mainly subsonic shells on whitewash.... that raised a few eyebrows.

Link to comment
Share on other sites

Shot does not spread continuously over the 40yds. The charge gets blown apart by air rushing through it. Thats because the pellets in front disrupts the airflow of the pellets behind causing them to move apart.. As the pattern opens up the pellets get further apart and interfere less with each others airflow. There may well be a massive difference at 20yds but by 40yds the two patterns will have self corrected and be about the same.

Link to comment
Share on other sites

Whilst it`s useful to know how the two compare we`re often restricted to which wad we can use anyway. Some clay grounds allow plastic but many straw balers don`t and similarly with land we shoot on. The farmer whose fields I shoot on has no problem with plastic wads on his arable land but insists on fibre when shooting on fields he uses for livestock. For that reason I usually just buy fibre as that covers all eventualities.

Link to comment
Share on other sites

Must admit I just buy fibre now as saves having to mess around making sure I have enough fibres in for when go to places that are fibre only. Plus I get used to shooting one cartridge.

My sentiments exactly. Fibre wads also pattern great in my Benelli M2!

Link to comment
Share on other sites

Plas wads can make a difference over plain fibre wads, and equaly if you think back to the old winchester super xx wildfowling loads, which used wraper buffer and fibre wad felt inverted card cup etc, they worked as well if not better than any plas wad.

I used to try and copy the old super xx wading as close as i could in reloads always struggled to get the inverterd card seals, made a die up but it was far too time consuming to be practical, heard they are available that work well but never seen one myself.

Fibre are a little more expensive too which puts me off a bit, if i could get fibre wads as cheap as plaswads i would load them far more than i do.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...