mellors Posted May 25, 2018 Report Share Posted May 25, 2018 I'm having a sort out. After refurbishing my webley axsor. 22. I'm now going to start on the air arms s300. Neither had been used for over 10 years. I've got lots of use for now while the pigeons are doing there thing. So I've printed off the tuning guide and ordered a seal kit. One thing I'm not sure about is the power adjustment. It appears easy but has anyone done one of these. It's got to be right as it will be used in a very sensitive area. Quote Link to comment Share on other sites More sharing options...
Mice! Posted May 29, 2018 Report Share Posted May 29, 2018 I'm about to do an axsor, still got to watch the dvd i bought, was it easy enough? Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Hardest bit is getting the trigger mounting pin back. Also the clocking bolt spacer is awkward dropped mine twice rolled off the bench took ages to find. If it's the old axsor I would suggest lock tight on the power adjustment then when your setting it won't move but you can still turn it. When reassembled. You'll see you can adjust it with pressure in the gun start off 5 turns in then half a turn at a time then chromo it. There is a blown up schematic on chambers site you can print off for seal locations. Last don't over tighten the stock bolt there's not a lot of thread I the tube (very easy to strip). I did Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 30, 2018 Report Share Posted May 30, 2018 Post it up with pics please... Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 1 hour ago, ditchman said: Post it up with pics please... If you look at trigger assembly you'll see the pin through the tube. I think if you backed of the tension it would be easier but then you've got to reset it all again. Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Also make sure cococking bolt is located correctly or it will jam. As it did here. Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Insert Allen key in here to stop it spinning. Then screw in hammer pin with lock tight on 5 turns to start with reassemble and test. Took me five attempts to get the power right. Running well now though. Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 30, 2018 Report Share Posted May 30, 2018 looks more complicated than my old air rifles..............nice blueing tho' Quote Link to comment Share on other sites More sharing options...
JDog Posted May 30, 2018 Report Share Posted May 30, 2018 ...... and lubricate well with Kelly’s vanilla ice cream. Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Invaluable addition to any job. Put all your bits in or fluids for cleaning stuff. Still no reply on Air arms s300. Not found anything on the Internet. Seals should arrive this week will have it bits at the weekend. Can't be that hard we'll see Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 30, 2018 Report Share Posted May 30, 2018 4 minutes ago, mellors said: Invaluable addition to any job. Put all your bits in or fluids for cleaning stuff. Still no reply on Air arms s300. Not found anything on the Internet. Seals should arrive this week will have it bits at the weekend. Can't be that hard we'll see hello, still no reply on AA S300 ???????? Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Read original post. We wandered of on my previous progect. Probably no one done one or wants to share info. But going press on. Nothing ventured etc. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 30, 2018 Report Share Posted May 30, 2018 10 minutes ago, mellors said: Read original post. We wandered of on my previous progect. Probably no one done one or wants to share info. But going press on. Nothing ventured etc. hello, sorry i did not read this, you asked Air Arms ???? and no joy ?? , there is one chap i know who is about the best AA man on these rifles and he is called Mike on the uk airgun forum goes by the name of Cloverleaf. Quote Link to comment Share on other sites More sharing options...
Mice! Posted May 30, 2018 Report Share Posted May 30, 2018 36 minutes ago, mellors said: Read original post. We wandered of on my previous progect. Probably no one done one or wants to share info. But going press on. Nothing ventured etc. cheers fella, i had missed your original post, thanks for the info and I was hoping it would be simple. send Bruno a msg about your 300 he might be able to help. Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 30, 2018 Report Share Posted May 30, 2018 2 hours ago, JDog said: ...... and lubricate well with Kelly’s vanilla ice cream. tried it with Walls with some ole bloom years ago....she wouldnt have it Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 37 minutes ago, ditchman said: tried it with Walls with some ole bloom years ago....she wouldnt have it More deviation. Must be raining everywhere. Think I'll make start on it get it stripped down ready. Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 30, 2018 Report Share Posted May 30, 2018 you have a captive board audience today............."the eyes of the world are upon you"... Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Hope so might get some help. Looks like everything is in this bit.came apart easy anyway. Now consulting tuning guide. Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 Looks like I'm in. Now wait for seals. Not seen any yet though. Quote Link to comment Share on other sites More sharing options...
ditchman Posted May 30, 2018 Report Share Posted May 30, 2018 christ ...i wouldnt know what half them things are for...................guess im just and old "leg gasser" now.. Quote Link to comment Share on other sites More sharing options...
Mice! Posted May 30, 2018 Report Share Posted May 30, 2018 seems like it came apart ok? I need to remember that take pictures as I go. Quote Link to comment Share on other sites More sharing options...
mellors Posted May 30, 2018 Author Report Share Posted May 30, 2018 50 minutes ago, Mice! said: seems like it came apart ok? I need to remember that take pictures as I go. Definatley. Make sure you've got plenty of Allen keys every ones a different size. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.