robmiller Posted October 7, 2018 Report Share Posted October 7, 2018 (edited) Hi there I have a little 20g 425 but it needsarpund a 1” spacer, It’s 14” lop but I need 15”. Can anyone advise my options please? I’m based in Cumbria. Many thanks Edited October 7, 2018 by robmiller Photo Quote Link to comment Share on other sites More sharing options...
Seadog1408 Posted October 7, 2018 Report Share Posted October 7, 2018 I found this post on here from a few years ago, might give you some help. mike Quote Link to comment Share on other sites More sharing options...
archi Posted October 7, 2018 Report Share Posted October 7, 2018 A nice bit of buffalo horn fitted and polished up looks good, got that on mine. or a leather covered pad. Both won’t be the cheapest option but will look better than a 1” black pad or a badly matched walnut extension Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted October 7, 2018 Report Share Posted October 7, 2018 Easiest is fitting a recoil pad a spacer won’t work with the current butt plate as the angles will make it to small Quote Link to comment Share on other sites More sharing options...
robmiller Posted October 7, 2018 Author Report Share Posted October 7, 2018 Hi im thinking I better just take it to a gunsmith and see what he recommends? im guess I won’t get a recoil pad to fit off the shelf? Not even sure how to measure it Quote Link to comment Share on other sites More sharing options...
johnphilip Posted October 7, 2018 Report Share Posted October 7, 2018 Ok , can you not get a bit more by moving the trigger forward , think looking at the picture it is ajustable . That would be a start. Then your not going to need as much on the backend . The Isis pads are quite nice , but need grinding to shape . Check the trigger first . Quote Link to comment Share on other sites More sharing options...
fizzbangwhallop Posted October 7, 2018 Report Share Posted October 7, 2018 Cheap but well made, cheerful, durable... https://www.ebay.co.uk/itm/SILICONE-SOFT-UNIVERSAL-FIT-GUN-BUTT-EXTENSION-RECOIL-FOR-SHOTGUN-PAD-SHOULDER/192303905326?epid=1289222485&hash=item2cc634ba2e:g:zYcAAOSwmrlU1TBu cheers fizz Quote Link to comment Share on other sites More sharing options...
wymberley Posted October 7, 2018 Report Share Posted October 7, 2018 Idiot that I am, I posted this in the link thread where it may well not be seen: Just a heads up. i've just had a Kickeez pad fitted but have had to have it replaced because with virtually hardly any more than slight light use - and with no argument at all from the fitter - it has developed a series of cracks in the "rubber" when viewed from the back - they look more like slits that a razor would have caused. With just one outing and before it had even been fired, the replacement has done the same. Again no quibble. There must be countless sold so I would imagine that these were from a faulty batch. However, as I've lost confidence and the gun was going to the 'smith anyway to have the stock dropped, I'm having a London Orange Silvers put on instead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.