daz181 Posted March 24, 2019 Report Share Posted March 24, 2019 (edited) Morning all, has anyone had any experience with the wildcat evolution moderator in the field? Went to look at one yesterday for .243, I was impressed with what I saw comparing them to the predators but not read much about people's experiences with the evolution, your experiences will be welcomed. Daz Edited March 24, 2019 by daz181 Quote Link to comment Share on other sites More sharing options...
tweedledee Posted March 24, 2019 Report Share Posted March 24, 2019 Yep have one on a 204..mighty job Quote Link to comment Share on other sites More sharing options...
Pigeon Shredder. Posted March 24, 2019 Report Share Posted March 24, 2019 .223 is wearing one on the recommendation of the PW massive, very well built and can interchange it onto the .17 in a few moments. Quote Link to comment Share on other sites More sharing options...
Longstrider Posted March 25, 2019 Report Share Posted March 25, 2019 Spent my money on a Wildcat Evo. Would do the same again in a heartbeat. Good kit. Quote Link to comment Share on other sites More sharing options...
Blacksheep Posted March 25, 2019 Report Share Posted March 25, 2019 On 24/03/2019 at 08:57, Pigeon Shredder. said: .223 is wearing one on the recommendation of the PW massive, very well built and can interchange it onto the .17 in a few moments. Which bits did you need to buy to make it interchange ? , Cheers Quote Link to comment Share on other sites More sharing options...
Pigeon Shredder. Posted March 25, 2019 Report Share Posted March 25, 2019 5 minutes ago, Blacksheep said: Which bits did you need to buy to make it interchange ? , Cheers Just the diffuser, 223 is purple, 17 is bronze. Thread on both rifles the same at 1/2 unf. Quote Link to comment Share on other sites More sharing options...
Blacksheep Posted March 25, 2019 Report Share Posted March 25, 2019 Just looking on the Wildcat site , seems a pretty cost effective solution . Quote Link to comment Share on other sites More sharing options...
wyn Posted March 25, 2019 Report Share Posted March 25, 2019 (edited) I use one on a .204 and it's pretty good. It does have a problem with the cone on the front of the diffuser eroding/ burning away which reduces the diameter of the hole down the middle. Now and again i have to put it on the lathe to flatten the end of the cone and open up the hole diameter. Edited March 25, 2019 by wyn Quote Link to comment Share on other sites More sharing options...
Dekers Posted March 26, 2019 Report Share Posted March 26, 2019 The Evolution is fine, not as quiet as the P* but then again its smaller/lighter. All pretty well made, and parts readily available for repair or modification! Quote Link to comment Share on other sites More sharing options...
Jaymo Posted March 26, 2019 Report Share Posted March 26, 2019 17 hours ago, wyn said: I use one on a .204 and it's pretty good. It does have a problem with the cone on the front of the diffuser eroding/ burning away which reduces the diameter of the hole down the middle. Now and again i have to put it on the lathe to flatten the end of the cone and open up the hole diameter. Have you let Alison at Wildcat know about it? Aleays found her to be ‘a good egg’ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.