millrace

OK having been out drowning a small welsh village with pints I've got to say. ,,,,,stand up for the ulster men......we seriously kicked ur *** today you just didn't show up......but the ulstermen scored,and you were left thinking maybe we are not invincible and from here I see it no grand slam for anyone and the championship to Ireland.........

Stand up for the ulsterman!!!!! Big henry were alf way there

Ahh worse for us ruddy Darcy back in the side,past it will offer nowt against the welsh,,,,hijack over....lol

Looking load for 204, most of info I can find says 25g rx10 and 39g sbk is safe accurate load anyone loading for this have opinion,,,,,

Life is to short to fill and sand,, coat with "thistlebond" and get someone to skim over only way to get the finish your after........

Right if your half handy,,,,,turn valves of remove rad as normal do what you need with wall,,,,,now get 2 large towels,shifting wrench,grips and valves,,slacken nut at bttm of valve and retighten,now wrap 1 towel round pipe and over floor,lay tools and valve in line where you can reach,now using other towel place over valve forming tent,now reach under hold valve and lossen but keeping valve presses down all under towel,when ready lift valve and put thumb over pipe,there will be a bit of water but the towels get it,now reach other valve line up above thumb/pipe quickly swap and keep valve pressed down now retighten nut,,,,,, yes there will be a bit of water but the towels will get it,only do this if your fairly confident,I do it this way to save draining things down.........make sure new valves are shut before you replace

Just wanting to "touch base"…........

Stand up for the ulster men….................

Oh dear the chariot needs to go to qwick fit…..............lol

And finally Darcy is dropped,he has been past his best for few seasons,get Ulster's young guns in,,,,,,,the boys in green are coming to get ya all........................u ave been warned

OK went to local maplins,having read what you all said my views,,,,,,,,,,its like ronseal......does exactly what you have all said,,,,,sparkly clean cases 2 caps into warm water,2 6 minute cycles job done!!!!!!!!! Excellent advice guys........

Be careful of the great O'Driscoll last stand,,if we get the right team out with more of Ulster's young guns you all just may be surprised.........

Could this be done before 16 Feb as that's when I intend to order my set.....lol

Programmes are well worth watching he def comes across well,,,,,,sorry guys but scary riding cup goes to philip mccallen,man was a nutter.....joey well poetry in motion comes to mind....

Cheap as chips,,,I,all do it for a grand.....…lol

Use 1 finger not 2,easy and just as quick,just takes a day to get used to.....

Yes and no,you have cold mains feed to tank as well, but as it lashed all day prob roof give it a good look first checking gutter for cracks as well....

Could be,check gutter roof ridge above,leak may not be where water is showing,if you don't mind ladders go up lift couple tiles at bttm and look down cavity.....

Cleaning has helped for sure, now these are rcbs dies not new, here is a question, the box says neck size set, the sizer die says .204 ruger fl .9 round the top collar ,does this stand for full length???

Got dies for the 204 yesterday so playing around tonight,,now just to ease your minds I've got a mate who is going to show me the ropes so this is just playing to see what I'm gttn wrong,,, Set first neck die ,,shell holder to btm of die lock off adjust pin,,hey presto primer out,,, neck now measuring .227 Seated die ,,,sized case till die touches then back quarter, then factory shell,, adjust depth till it touches,,,, So take case put in head,, raise press but bullet is still loose.... So what am I missing.....neck is .226 ,,so I'm guessing more crimp needed,,,,,over to you all.....

Can you link the add or copy or more info as I don't have the mag and can't find info online thanks

This is why seeking opinions,I'm not botherd about price if they are worth it, (has to be some perks to being vat reg business...lol) can't put a price on being able to hear in 20yrs......

Is there a fleur de lies mark on barrel,poss under hand grip near serial number

Thnx read you previous post on the subject,thnx for reply,prob shd add, I don't shoot massively ie no clays unless for fun before going for pints,,just rough shoot,pheasant in a club and flight ducks so hearing others is important, this year got sore ear one day, so found my in ear passive,, think there peltor headband with foam ear plugs, now they are good with sound of gun but they dead in everything a bit as well hearing wings is something I find helpful,so hence thinking digital,,,,,

Having read few topic about cens hearing protection, think I'm going to invest in something like these, so looking opinions on them or any other similar in ear digital protection anyone is using, good and bad views....