rwade545 Posted March 11, 2013 Report Share Posted March 11, 2013 Does any one have any experience of using one of these? Just purchased one, shipped from Canada in 6 days. Took a while to install, mainly due to me, but very impressed. Adjusted stock trigger as low as it would go, bit of creep and trigger pull of about 4 lbs. Replaced it with the heaviest spring out of the four supplied, borough the pull down to about 2.5lb, and then put the smallest blue shim in ( sear would not engage with the largest red one). What can i say, such a change. Always heard a trigger modification was worth doing but amazed at difference it has made. Trigger is much lighter, and no creep, just a bit of pressure and snap it goes. Have done the drop gun onto the stock and gibe the back of the stock a good wallop with a mallet to make sure the sear does not slip. REALLY IMPRESSED. Can get the kit delived from him for $18 plus $ 7 postage. So about £12 delivered. Well worth it and acutally easy enough to install if you have no clue. A you tube search shows you the steps. Am well chuffed. Between the trigger and spending a while polishing the bolt with 800 grit my cz 455 17hmr has been transformed. Bolt now just glides shut under gravity, and lock with a finger, safetly is smooth and the trigger is now light and crisp. Just wish I had done pictures for those of you who are intrested in doing it to yours. Can't wait to get out with the rifle again. Quote Link to comment Share on other sites More sharing options...
sweet169 Posted March 11, 2013 Report Share Posted March 11, 2013 i have just done the same trigger mod and will agree it has transformed the gun well worth doing Quote Link to comment Share on other sites More sharing options...
Elmer Fudd 1 Posted March 12, 2013 Report Share Posted March 12, 2013 nice rifle Quote Link to comment Share on other sites More sharing options...
ulsterman Posted March 12, 2013 Report Share Posted March 12, 2013 How did you polish the bolt Quote Link to comment Share on other sites More sharing options...
rwade545 Posted March 12, 2013 Author Report Share Posted March 12, 2013 How did you polish the bolt http://www.youtube.com/watch?v=ohCUBaaQbW4 Hi, polishing bolt was a bit like this. But as bolt was newish, and rust free i started with a light sand at 640 grit then 800grit wet and dry with a little oil on the paper. Just smoothed it a bit but makes a work of difference. First of all i dissassembled the bolt so as not to remove the blueing of the bolt handle and safety. Used the corner of the table instead of a bolt to compress the bolt. Also gives you a chance to lube the inside of bolt and clean up and residue. good luck. Quote Link to comment Share on other sites More sharing options...
ulsterman Posted March 12, 2013 Report Share Posted March 12, 2013 Thanks will give it a go. Quote Link to comment Share on other sites More sharing options...
farmshooter Posted March 12, 2013 Report Share Posted March 12, 2013 Just ordered one is £17.33 delivered so still not bad Cheers Tom Quote Link to comment Share on other sites More sharing options...
Dekers Posted March 13, 2013 Report Share Posted March 13, 2013 I have had several CZ rimfires over the years. A trigger kit would possibly have been useful on all of them but 3 kept their original triggers and were fine, 1 x .22lr brilliant, 1 x WMR brilliant, 1 x .22lr acceptable. I have replaced 2 that I currently own, my HMR Silhouette and WMR American (both bought new) with the Brooks kit, because the triggers on them were appalling. I have said it before; this kit is the best/cheapest accessory you will ever buy for any gun! Other versions of the kit are available Quote Link to comment Share on other sites More sharing options...
bullet boy Posted March 13, 2013 Report Share Posted March 13, 2013 Want to do mine now but how easy is it to change the existing spring for the new one please? Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted March 13, 2013 Report Share Posted March 13, 2013 Any link to buy the kit? Quote Link to comment Share on other sites More sharing options...
sandspider Posted March 13, 2013 Report Share Posted March 13, 2013 That reminds me - I need to actually fit the SYSS trigger kit I got (£15 posted if I remember right) to my CZ-452. Wonder where I put the kit... Quote Link to comment Share on other sites More sharing options...
V8 90 Posted March 13, 2013 Report Share Posted March 13, 2013 Want to do mine now but how easy is it to change the existing spring for the new one please? Very easy Quote Link to comment Share on other sites More sharing options...
V8 90 Posted March 13, 2013 Report Share Posted March 13, 2013 Any link to buy the kit? Copy & paste this number into the bay of evil - 160800484012 Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted March 13, 2013 Report Share Posted March 13, 2013 Copy & paste this number into the bay of evil - 160800484012 Cheers. Quote Link to comment Share on other sites More sharing options...
rwade545 Posted March 13, 2013 Author Report Share Posted March 13, 2013 also this link has a good step by step write up http://www.longrangehunting.com/forums/f33/yo-dave-trigger-kit-cz-455-install-97497/ Quote Link to comment Share on other sites More sharing options...
Dave T Posted March 14, 2013 Report Share Posted March 14, 2013 Rimfire Magic also do a kit - £14 next day Quote Link to comment Share on other sites More sharing options...
bullet boy Posted March 16, 2013 Report Share Posted March 16, 2013 Any link to buy the kit? Just done mine Steve and bought it from www.rimfiremagic.co.uk - Trigger fires sweet as a nut now!Brillant! Quote Link to comment Share on other sites More sharing options...
bullet boy Posted March 17, 2013 Report Share Posted March 17, 2013 I would have thought by now that CZ would have lightened the Trigger Pull on their rifles? Quote Link to comment Share on other sites More sharing options...
Dekers Posted March 18, 2013 Report Share Posted March 18, 2013 I would have thought by now that CZ would have lightened the Trigger Pull on their rifles? I'm not quite following that either, although I suspect some of it is down to the legals, any manufacturer will tend to lean on the safe side rather than the light side for a trigger. But this new 455 trigger upgrade is meant to be "good". http://www.czrifles.co.uk/cz-455-trigger-upgrade/ There is also a variation on their triggers, I have had several 452 models, and 3 brand new, of those the HMR and WMR triggers were terrible in pretty much every way, yet the .22lr was fine! :hmm: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.