Bigstu84 Posted June 4, 2016 Report Share Posted June 4, 2016 Does anyone know where I can buy a stock key for an mk38. Is it a standard tool, or a specialist piece of kit. Quote Link to comment Share on other sites More sharing options...
markm Posted June 4, 2016 Report Share Posted June 4, 2016 I removed the action from the stock of my mk70 using a long flat blade screwdriver. I had to turn down some of the handle first as it wasn't long enough. I've since used a ratchet spanner with a long extension bar, which works a treat. Quote Link to comment Share on other sites More sharing options...
Junkyard Dog Posted June 4, 2016 Report Share Posted June 4, 2016 mk 38 is a slot headed screw Quote Link to comment Share on other sites More sharing options...
Gordon R Posted June 4, 2016 Report Share Posted June 4, 2016 As above - according to the handbook. You can also use a 1/4" drive ratchet and extension, with a bit holder - containing a flat blade bit. Quote Link to comment Share on other sites More sharing options...
PhilR Posted June 4, 2016 Report Share Posted June 4, 2016 You can actually get stock bolts with an Allen head from the importers BWM. They're 5mm the same as a Perazzi. I put them in all my Mirokus and drill a hole in the butt pad for quick removal of the stock if needs be. Quote Link to comment Share on other sites More sharing options...
slimshooter Posted June 5, 2016 Report Share Posted June 5, 2016 http://www.wickes.co.uk/Wickes-10mm-Soft-Grip-Slotted-Screwdriver-250mm/p/167307 This screw drive is exact fit for removing stock bolt, use on it on mine, just apply a bit of thread lock when putting bolt back in. Quote Link to comment Share on other sites More sharing options...
johnphilip Posted June 5, 2016 Report Share Posted June 5, 2016 http://www.wickes.co.uk/Wickes-10mm-Soft-Grip-Slotted-Screwdriver-250mm/p/167307 This screw drive is exact fit for removing stock bolt, use on it on mine, just apply a bit of thread lock when putting bolt back in. Sorry put i would not put any thread lock anywere near the bolt, there should be no need to plus there is always a chance that someone may unwillingy put to much on the threads and could get into the action. ?..this is just my view others may, but not for me sorry. Quote Link to comment Share on other sites More sharing options...
Gordon R Posted June 5, 2016 Report Share Posted June 5, 2016 I would sooner use a spring washer than thread-lock. Quote Link to comment Share on other sites More sharing options...
PhilR Posted June 6, 2016 Report Share Posted June 6, 2016 I would sooner use a spring washer than thread-lock. This is the right way to do it. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted June 6, 2016 Report Share Posted June 6, 2016 Don't use thread lock and proper Spring washer is the correct way to do it. Quote Link to comment Share on other sites More sharing options...
slimshooter Posted June 6, 2016 Report Share Posted June 6, 2016 A lesson in not taking other people's advise for me, although I only used a drop, the screwdriver is the right one though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.