Jump to content

What is this


djgeoff
 Share

Recommended Posts

hi all i am sure some one this forum will know this, i have what appears to be a minor oil leak.

i have a 2.5 td shogun equippe 2004

 

chap spotted it yesterday during m o t, so this morning i got car on ramps dropped steel under plate off so i could look up at leak.

 

i think leak may have been coming from underside of filter, no sure yet.

i did manged to nip the filter up a bit more then done my best to wash area down so i can keep eye on it(damp awkward spot).

 

but i was wondering what the item is with wire on it, my first thought was oil pressure sensor, but manual shows it lower down towards the sump, but there i have like an elbow type thing coming out (no electrical connections) you can see that item in image

 

your help would be most appreciative

regards

geoff

post-21509-0-16509300-1488117169_thumb.jpg

Edited by djgeoff
Link to comment
Share on other sites

Yes- clearly a pressure switch of some sort. Sod's law they are always in such an awful location 😕

As you've cleaned it off- just keep an eye on it, those type of things can take months to create a single oil drop on a driveway.

 

Unless your losing a fair amount of oil I would leave it.

Link to comment
Share on other sites

Yes- clearly a pressure switch of some sort. Sod's law they are always in such an awful location

As you've cleaned it off- just keep an eye on it, those type of things can take months to create a single oil drop on a driveway.

 

Unless your losing a fair amount of oil I would leave it.

yeh i might just do that, hardly loosing anything on the ole dip stick, but it just looks bad on the engine

thanks for you help

It's an oil pressure switch and the likely cause of a leak.

Blast it off with some brake cleaner and run the engine to confirm.

i thought it might be but manual said it was lower down, thats why i thought i better ask the knowledgeable lot here on the forum.

thanks for your help

Link to comment
Share on other sites

I have seen some gun gum stuff used to seal leaking sump plugs in alloy casings when the threads have gone - i cant recall what it is called but i saw a guy using it banger racing - he said its sets hard then needs chipping off

 

If it is that just bob some of that around

Link to comment
Share on other sites

I looked at a l200 a few weeks ago with a oil leak and it was the oil filter, somebody hadn't nipped it up enough and it was slightly weeping

yeh i think thats what i have found, i am just waiting , you think the worst when oil shows its head where it is not supposed to be lol.

thanks any way,

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...