steve_b_wales Posted July 23, 2020 Report Share Posted July 23, 2020 What number Loctite glue do I need to set the scope rail screws into the action? Quote Link to comment Share on other sites More sharing options...
blackbird Posted July 23, 2020 Report Share Posted July 23, 2020 I would say 222 low strength don’t use high strength ( green ) or it will be sledgehammer job if you need to remove, 🔨 Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted July 23, 2020 Author Report Share Posted July 23, 2020 11 minutes ago, blackbird said: I would say 222 low strength don’t use high strength ( green ) or it will be sledgehammer job if you need to remove, 🔨 Cheers Steve. I think I've got some of that. Quote Link to comment Share on other sites More sharing options...
Capt Christopher Jones Posted July 23, 2020 Report Share Posted July 23, 2020 blue Quote Link to comment Share on other sites More sharing options...
udderlyoffroad Posted July 23, 2020 Report Share Posted July 23, 2020 40 minutes ago, blackbird said: I would say 222 low strength don’t use high strength ( green ) or it will be sledgehammer job if you need to remove, 🔨 Seconded, 243 is for M6 and bigger really. Quote Link to comment Share on other sites More sharing options...
Dougy Posted July 23, 2020 Report Share Posted July 23, 2020 With no intention to remove mine i use 243. Quote Link to comment Share on other sites More sharing options...
V8 90 Posted July 23, 2020 Report Share Posted July 23, 2020 It’s easy to remove thread locked components - just carefully warm the area with a heat gun & it turns back to liquid Quote Link to comment Share on other sites More sharing options...
Mr.C Posted July 23, 2020 Report Share Posted July 23, 2020 28 minutes ago, V8 90 said: It’s easy to remove thread locked components - just carefully warm the area with a heat gun & it turns back to liquid Handy to know, cheers Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted July 27, 2020 Author Report Share Posted July 27, 2020 On 23/07/2020 at 12:40, blackbird said: I would say 222 low strength don’t use high strength ( green ) or it will be sledgehammer job if you need to remove, 🔨 I found a tube of it and have now added some to the scope rail screws. Quote Link to comment Share on other sites More sharing options...
miki Posted July 27, 2020 Report Share Posted July 27, 2020 On 23/07/2020 at 12:56, Capt Christopher Jones said: blue Purple ... Low strength, designed for non ferrous metals, perfect for scopes and rails etc (#222) Quote Link to comment Share on other sites More sharing options...
Dougy Posted July 27, 2020 Report Share Posted July 27, 2020 On 23/07/2020 at 16:08, V8 90 said: It’s easy to remove thread locked components - just carefully warm the area with a heat gun & it turns back to liquid You can confine the heat to the exact nut by using a soldering iron too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.