mellors Posted November 12, 2021 Report Share Posted November 12, 2021 Hi does anyone know of cheaper way to obtain these. They seem very expensive bought as a kit. Last one i had £14 odd for 11 o rings for my axsor and a similar price for the air arms. Quote Link to comment Share on other sites More sharing options...
222mark Posted November 12, 2021 Report Share Posted November 12, 2021 42 minutes ago, mellors said: Hi does anyone know of cheaper way to obtain these. They seem very expensive bought as a kit. Last one i had £14 odd for 11 o rings for my axsor and a similar price for the air arms. Try ebay mate. Loads of o ring suppliers on there. Quote Link to comment Share on other sites More sharing options...
old'un Posted November 12, 2021 Report Share Posted November 12, 2021 you need to measure the ID and Cross Section thickness, there's plenty of people online selling O-rings, I bought a pack of 5 some time ago, they cost me £1.50p Quote Link to comment Share on other sites More sharing options...
Mice! Posted November 12, 2021 Report Share Posted November 12, 2021 1 hour ago, mellors said: Hi does anyone know of cheaper way to obtain these. They seem very expensive bought as a kit. Last one i had £14 odd for 11 o rings for my axsor and a similar price for the air arms. https://www.ebay.co.uk/usr/sealsuppliesuk I buy from here, but you would need to know all the sizes, £14 doesn't seem to bad for a full kit. Quote Link to comment Share on other sites More sharing options...
Good shot? Posted November 12, 2021 Report Share Posted November 12, 2021 (edited) 'o-ring-sporting' on the bay is a decent chap for kits, He threw a couple of extra seals in for me because his kit was for a delrin valve and mine is an early Rapid with a steel valve. To get the best price however you need to know all the sizes and spec of the seals needed and get them individually from a manufacturer but often you need to get more than one of each seal. Edited November 12, 2021 by Good shot? Quote Link to comment Share on other sites More sharing options...
mellors Posted November 12, 2021 Author Report Share Posted November 12, 2021 Thanks for replies. It wasn't the cost just i was ordering to get odd seals. The only ones i could find individually were the fill adapter seals. Each supplier uses different numbers for the same seal which i thought was strange so I've stuck with one supplier but they don't do separate seals. The most common one that goes often is the very tiny one on fill valve inside the axsor and the breach one on the air arms. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted November 13, 2021 Report Share Posted November 13, 2021 (edited) Hello, go on the UK AGF forum and find a chap called Ped 👍 or this chap Logunator aka Mick who does the servicing of PCPs , currently doing my FX Vermy MK 1 Edited November 13, 2021 by oldypigeonpopper Quote Link to comment Share on other sites More sharing options...
mellors Posted November 13, 2021 Author Report Share Posted November 13, 2021 42 minutes ago, oldypigeonpopper said: Hello, go on the UK AGF forum and find a chap called Ped 👍 or this chap Logunator aka Mick who does the servicing of PCPs , currently doing my FX Vermy MK 1 Ok thanks. If i could get half a dozen of the seals i need for each gun I'll be set up for a long time as i have four sets of all the others after using the one's i needed from the kits. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted November 13, 2021 Report Share Posted November 13, 2021 19 minutes ago, mellors said: Ok thanks. If i could get half a dozen of the seals i need for each gun I'll be set up for a long time as i have four sets of all the others after using the one's i needed from the kits. Hello, ok keep us posted 👍 Quote Link to comment Share on other sites More sharing options...
mellors Posted November 14, 2021 Author Report Share Posted November 14, 2021 On 13/11/2021 at 10:28, oldypigeonpopper said: Hello, ok keep us posted 👍 I have found chambers do individual seals in packs. Will order some tomorrow now sorted thanks. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted November 14, 2021 Report Share Posted November 14, 2021 11 hours ago, mellors said: I have found chambers do individual seals in packs. Will order some tomorrow now sorted thanks. Well done 👍 Quote Link to comment Share on other sites More sharing options...
mellors Posted November 16, 2021 Author Report Share Posted November 16, 2021 On 14/11/2021 at 23:03, oldypigeonpopper said: Well done 👍 Hope it helps I've had kits from them before but didn't see they do individual seals before. Perhaps others have asked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.