dingo45 Posted September 22 Report Share Posted September 22 Can you buy scope ring liners tha are offset I cannot get enough windage left on my KT gun what do I do   🤨 I have tried swopping the rings front to back Quote Link to comment Share on other sites More sharing options...
scarecrow243 Posted September 22 Report Share Posted September 22 Hi try putting the locking screws on the opposite side if that does not work you would need another set of mounts Quote Link to comment Share on other sites More sharing options...
Mr.C Posted September 23 Report Share Posted September 23 Sportsmatch do them also Burris XTR rings have liners that give up to 40moa (if I remember correctly). But I'd go with the above option first. Quote Link to comment Share on other sites More sharing options...
dingo45 Posted September 23 Author Report Share Posted September 23 Many thanks to you all I have now shimmed it in the oposite direction problem solved Dingo 45 Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted September 23 Report Share Posted September 23 There must be something wrong if you need to shim a scope to get windage adjustment. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted September 23 Report Share Posted September 23 Hello, What is KT ? and what Scope ?? Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted September 23 Report Share Posted September 23 24 minutes ago, oldypigeonpopper said: Hello, What is KT ? and what Scope ?? Think it's a HW100 variant. Quote Link to comment Share on other sites More sharing options...
London Best Posted September 23 Report Share Posted September 23 Karbine Thumbhole Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted September 23 Report Share Posted September 23 (edited) 14 minutes ago, bruno22rf said: Think it's a HW100 variant. Hello, Thankyou, Just need scope make and model , So many Posts like this lack the information needed for PW member to give opinions on a fix !!!! Edited September 23 by oldypigeonpopper Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted September 23 Report Share Posted September 23 (edited) 1 hour ago, oldypigeonpopper said: Hello, Thankyou, Just need scope make and model , So many Posts like this lack the information needed for PW member to give opinions on a fix !!!! Doubt that the scope makes much difference OPP, scope mounts are manufactured to hold the scope tube central then the actual scope obviously has adjustment, I would centralise the scope, check the mounts by eye along the barrel, refit and see how far out the windage is, I would say anything over 3 inches left/right deviation @25 yards indicates a problem. Bent/misaligned barrel, damaged scope, etc. Edited September 23 by bruno22rf Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted September 23 Report Share Posted September 23 24 minutes ago, bruno22rf said: Doubt that the scope makes much difference OPP, scope mounts are manufactured to hold the scope tube central then the actual scope obviously has adjustment, I would centralise the scope, check the mounts by eye along the barrel, refit and see how far out the windage is, I would say anything over 3 inches left/right deviation @25 yards indicates a problem. Bent/misaligned barrel, damaged scope, etc. Hello, You maybe right Bruno but there could be a scope problem and if a Hawke i would be contacting them as per warranty Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted September 23 Report Share Posted September 23 Or just "chase" the problem. Â Something is VERY wrong to have to start making out of scope adjustments. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.