ditchman

new piston/seal ring on....new bush dropped into housing...new circlip....then start to slide turbo shaft thro the titainium heat sheild ...into the housing.... got to do some shopping now... take some pain killer... and ..."she know nutthin"...........and that is NOT the sitting room carpet (same colour mind you)...its a towel from the bathroom....

well ...thats what came in the re-build pack....and more...but they were put to one side as they were for a different generation of turbo... first thing to do ...lock tite the screws that hold the oil gallery plate in position..then put the....compresser seal ring on..(its like a piston ring)...then wash the turbo out ...and check bush housing...(exhaust side)....

now that is nice...........my farmer does similar with his CMS....but not to the standard and profusion as that...................you want to comment about that to him ...bet he would be dead chuffed to have someone comment on that............................im not a honey man...but i bet the bees make "some good stuff" around there.. made my day those pics

Right 'ere we are again......................TIGHTCHOKE "are you receiving me ?".............(he must be somewhere else playing with LONEGUNMAN... ) STAND BY FOR ACTION... 7....6....4....3.....2.....1.....................................................

what now................... my life has come to an end................i be bereft............

aaaahhhhh..................cunning plan...

keep yer knickers orn...

are you going to get around to ....doing to diff...?

if it is a well known make.....and good model it is likely that there are parts still availble for it..........it really depends wether you like it or not...........its the equiverlent to the Browning auto ...(the first one)....many people think it is the ugliest gun they have ever seen....i like them with a passion... im going quite for a bit on the Merc S re-build at the moment...as all the parts are in 'cept the cocking lever.......and im doing some reseach on the varity of springs i could use... i might ...if it is going to be a while waiting for it to come..... finish the Garrett Turbo charger rebuild.........

what exactly is it anyway...................

well.........unlike some of the parties...you got a nice clear cut answer back....which is quite refreshing..

dont worry about the child.............worry about the ex husband.....make sure all your security is up to snuff....cause he might try and make trouble for you telling white lies to the police...then you get a snap visit....................

That sounded like hard work.............it must keep you fit and out of late night mischief...

sorry ,,,much as i would like to i cant......i have several projects lined up for the next few mths ....including the rest of the Garett turbo-charger rebuild...which is half owned by VILKING and TIGHTCHOKE......then there is the Landrover aahhh...the list goes on....and if this Merc..S works well ...i will be out for bunnies and squizzers........... thanks for asking... PS...why dont you do it yourself....plenty of help on here you know....you dont even have to ask..

these have a very good rep' as regards to accuracy...very small groups at 11.8ftlbs..........they were brought out to compete against the German imported springers....the rifle is mechaically perfect now...proberly better than new...with a better spring...not a more powerful spring but a better one...and using my dry grease...it has every oppotunity to shoot better than the air arms one i did a few mths ago... not happy with the Milbro select pellets i got....they are too small at 4.5mm.................JSB Exact do a 4.5mm...4.52mm....and a 4.53mm pellet so i will play with then to start of with..

Try Photo Wizard

Looking better that that old polyarmoured varnish........i could see a bit of figure under it but i didnt think it would be better........

Was informed today that all the new parts and upgrades will be available to pick up tomorrow.....so i thought i would have a quick wixx around the mechanicals to see if there was anything i had missed........... checked everything but was not truly happy with the detante lock.....couldnt quite figure it out but it wasnt sounding perfect....i had cleaned the old grease out...ab#nd shoved the spring and lock back in.....anyway i thought i would be really anal and polish out the cylinder which the lock bolt slides in..so i does this with a dowel of wood and fine wet&dry..........so i start to do this and pull the dowel out and its all cut and mashed up....so i stich some petrol in and use a small screwdriver ...and out comes this bloody stuff....what you see is half of it.....been in there for 30 odd years bloody drilling swarfe from when it was made........so i polish it out....wash it out with jungle juice pack it full of grease...put it back together......RESULT...it is as slick as snot.. few more drops of oil on the wood...coming along nicely............... ...(i rekon anyway)

This year last mth after changing insurance companies EVERY DAMN YEAR.....Adrian Flux...sent my renewal thro....... SAME PRICE AS LAST YEAR ....no fuss no bover....for a change.........................

found out now................ barrell (the rifled bit is 18.5".........total lenght of the barrell 19 3/8"....as the end of the barrell is bored out for some reason....

Why dont Holland & Holland make air rifles........

and we all thought you didnt have a pot to pee in...

this one came devoid of colour............i have some gold leaf and size about somewhere...might just do it.....i will test fire it first and if it performs well then i might do it...

it is reconditioned.....its just the nature of the beast.....to be quite frank i prefere it to use a bit of oil....then i know it is been lubed......CAT engines use about 1/2 pint a day.... i pay £23.00 for my pure mineral oil 4 litres........its 15w/40

this is the guide/cradle that keeps the loading arm straight when cocking ....the cocking arm was none spec and damaged and it scaped and damaged the cradle...i have a new cocking arm coming and when i fit it ....it will slide smoothly thro the cradle which i have flattened off now....this while also be greased unlike the rest of the rifle...