steve_b_wales Posted April 29, 2015 Report Share Posted April 29, 2015 I've just been reading an article in this month's (June edition) of Sporting Rifle Gun magazine, on how to make a high seat by just using 9 good quality wooden pallets and a few extras. It looks good too, and is simple to make. I may have a crack at making one myself. Quote Link to comment Share on other sites More sharing options...
welshwarrior Posted April 29, 2015 Report Share Posted April 29, 2015 Just read the same in sporting gun. Looks good and stable. Quote Link to comment Share on other sites More sharing options...
team tractor Posted April 29, 2015 Report Share Posted April 29, 2015 I'm unsure Quote Link to comment Share on other sites More sharing options...
John_R Posted April 29, 2015 Report Share Posted April 29, 2015 I might have to browse a copy if I see one. I made my own portable last year, from a folding ladder, a folding chair and some tubes and odds & ends, but I do think I would like to leave one or two out. Quote Link to comment Share on other sites More sharing options...
steve_b_wales Posted April 29, 2015 Author Report Share Posted April 29, 2015 Just read the same in sporting gun. Looks good and stable. I meant to write, Sporting Gun. Quote Link to comment Share on other sites More sharing options...
loriusgarrulus Posted April 29, 2015 Report Share Posted April 29, 2015 I'm unsure That's because you used 10 pallets. You are only supposed to use 9. Quote Link to comment Share on other sites More sharing options...
marshy pete Posted April 29, 2015 Report Share Posted April 29, 2015 You can use two IBCs, the one the bottom half full of water for stability, remove tank and wrap a bit of cammo net round remaining cage and wire on top then cut a firing slot and an entrance hole, add a little set of steps and some pipe lag for a rest and you're away. Quote Link to comment Share on other sites More sharing options...
Dougy Posted April 29, 2015 Report Share Posted April 29, 2015 Or a pile of tractor tyres, with some wooden planks in for standing and sitting on. Quote Link to comment Share on other sites More sharing options...
Phil9 Posted April 29, 2015 Report Share Posted April 29, 2015 I've just been reading an article in this month's (June edition) of Sporting Rifle Gun magazine, on how to make a high seat by just using 9 good quality wooden pallets and a few extras. It looks good too, and is simple to make. I may have a crack at making one myself. iv made one of them on 1 of my perms due to it being quiet flat,, I have used 16 pallets and put on a wooden balcony type round it with a ally ladder to help me get in,,also it's built just under the edge of the barn so I'm protected from the elements if it turns bad! It also gives me a 240* field of view across my land.id post a few pics to show u but I DNT understand how to put them on Quote Link to comment Share on other sites More sharing options...
John_R Posted April 30, 2015 Report Share Posted April 30, 2015 iv made one of them on 1 of my perms due to it being quiet flat,, I have used 16 pallets and put on a wooden balcony type round it with a ally ladder to help me get in,,also it's built just under the edge of the barn so I'm protected from the elements if it turns bad! It also gives me a 240* field of view across my land.id post a few pics to show u but I DNT understand how to put them on If you can email the pics to one of us maybe we could post for you. I would be willing if you wish. Quote Link to comment Share on other sites More sharing options...
dadioles Posted May 2, 2015 Report Share Posted May 2, 2015 My advice is to re-claim the wood from the pallets, just knock out the nails which can be straightened for use again later. Add a few fence posts and a bit of straw and you can knock up something quite comfortable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.