Mud Posted May 5, 2022 Report Share Posted May 5, 2022 Can anyone suggest a semi auto 12 guage which works well with a slip on hushpower moderator please? I can't seem to find anything definitive on Google. Thanks Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted May 5, 2022 Report Share Posted May 5, 2022 Hello, contact the RFD who supplies the hushy, they are in Kent , I found them most helpful Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted May 5, 2022 Report Share Posted May 5, 2022 They should all work .the mod should have little to no bearing on a sa. To cycle carts That goes for inertia and gas driven . The only issue comes when you drill holes in your barrel breech side of the exhaust ports on a gas sa. Which you wouldn't do . Quote Link to comment Share on other sites More sharing options...
WalkedUp Posted May 6, 2022 Report Share Posted May 6, 2022 Issue is using subsonic loads too, not enough punch to cycle. Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted May 6, 2022 Report Share Posted May 6, 2022 Yeah .my 20b sa. Won't cycle carts below 24 gram .but 24 grm and above are fine . The mod on the end or not this doesn't alter I guess if anything , the slight back pressure created by the baffle stack in the mod should mean 21 grm loads actually have a greater change of cycling properly, than without the mod on . I haven't really tested that as I'm not interested in 21 grm carts or subsonics Quote Link to comment Share on other sites More sharing options...
jall25 Posted May 6, 2022 Report Share Posted May 6, 2022 Im not sure why you would get a hushpower type gun and not use subsonics I have a pump action and 95 percent of the time that cycle ok May be worth a look ? Very very heavy mind ! Quote Link to comment Share on other sites More sharing options...
Sweet11-87 Posted May 6, 2022 Report Share Posted May 6, 2022 (edited) could in theory mess with the timing of a gas operated semi auto. it wont start to cycle until the shot charge and wad has cleared the gas ports in the barrel. and that fraction of a second between the gas ports and the muzzle is where the pressure is built to cycle the action. you disrupt that with a mod or holes into a mod to let the gas expand youre gona probably find it wont cycle very reliably. most gas operated guns stuggle with subsonic and light loads at the best of times unless you change or trim the return spring. like others have said its probably way less drama just going for a pump then you completley do away with all the potential issues. edit: just seen you said slip on mod. if youve not interupted the cycle time at all with a barrel modification it shoud probably cycle the same if not better with the extra bit of pressure delay by the expanding gas in the mod. Edited May 6, 2022 by Sweet11-87 Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted May 6, 2022 Report Share Posted May 6, 2022 (edited) 9 hours ago, jall25 said: Im not sure why you would get a hushpower type gun and not use subsonics I have a pump action and 95 percent of the time that cycle ok May be worth a look ? Very very heavy mind ! I just find that slow or subs just dont kill reliably at range .the point of going pigeon decoying for me is to bag birds .and subs don't do that for me . A mod on a gun makes a MASSIVE difference to the sound heard by me and everyone else around irrespective of the cart used .a couple decibels lower makes little difference to the sound but does reduce my kill ratio/ effectiveness and hence enjoyment considerably Edited May 6, 2022 by Ultrastu Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.