Jump to content

Brinkworth Squirrel Feeders


wymberley
 Share

Recommended Posts

17 minutes ago, FreshFace said:

Great question Wymberley, I’ve been very tempted recently. Looking forward to hear the feedback also.

He who hesitates............I don't know where else these are sold but sales from the Bay finish on the 7th and there's only a 5 of the 11" ones left - haven't checked the other sizes.

Link to comment
Share on other sites

3 hours ago, wymberley said:

Do users think that these are worth the money?

Just pulled their site up and the answer is no.   I make very similar flip top feeders out of metal plate which work as well if not better. They cost just a few pop rivets and screws.   I don't know your location but if you wanted a couple I would be happy to make them up for you for nowt.   £45 no way.

The picture is just one style with a large hopper, howver I find that shorter versions work as well and hold sufficient food for a week or so in heavy use. I drill 3/8th holes in the front panel and small birds can come and feed and act as decoys.  The most I have shot in one sitting of this feeder was 19 in an hour and half but that was the first time in that wood and the feeder had been in position for 10 days before my visit.

You can easily make one yourself , it ain't rocket science.  The information panels on the side of IBCs is good material as it is normally galavanised.

003.jpg

Edited by Walker570
Link to comment
Share on other sites

5 minutes ago, Walker570 said:

Just pulled their site up and the answer is no.   I make very similar flip top feeders out of metal plate which work as well if not better. They cost just a few pop rivets and screws.   I don't know your location but if you wanted a couple I would be happy to make them up for you for nowt.   £45 no way.

That's very kind of you; thank you very much. However, I was an aircraft technician in airframe flavour so could probably manage. Un/fortunately I'm one of the 'extremely vulnerable' folk so for the past couple of years I've not been up to much and the old pension pot is looking quite full so I fancy lashing out a bit even if it's really unnecessary. A little of what you fancy.......and all that. 

Link to comment
Share on other sites

Absolutely no problem.  I just get a n extra kick out of shooting them off my own feeders.  I cut the corners of IBCs which cat as brackets which can bt screwed or strapped to trees etc.  This picture was a good hour or two off one of mine also the uninformed like on a golf course think them bird feeders.

007.jpg

Link to comment
Share on other sites

8 hours ago, wymberley said:

A 11" version, the rats R2 and a 25mm spinner should arrive middle/end of next week and I'll post an opinion - but obviously not yet on performance.

Ordered the 15” version today, so likewise, I will post a verdict on it. 
Thank you for letting me know about them. I had not heard of them before you mentioned it.

I had planned to make one but I like the idea that these are pellet and squirrel proof and also, I love the idea of keeping a small UK business going, especially a shooting related one. 

Link to comment
Share on other sites

Great. I also try and support as many British outlets as possible but I am an invetorate do it yourselfer.  If I need to I put a steel back plate against where I expect to shoot, e'g if the background may not be perfect Even with the Brinkworth it may be an idea for such where needed.   Have fun.  Whack 'em and stack 'em.

Link to comment
Share on other sites

20 hours ago, moondoggy said:

Ordered the 15” version today, so likewise, I will post a verdict on it. 
Thank you for letting me know about them. I had not heard of them before you mentioned it.

I had planned to make one but I like the idea that these are pellet and squirrel proof and also, I love the idea of keeping a small UK business going, especially a shooting related one. 

I'm getting the 25mm spinner on the grounds that I probably can't see the 15 at 40 yards. Also, 'Shoot 'n' See' do a 1" target and as I make up various targets, 'Go 2 Products' do some 1" coloured stickies.

Link to comment
Share on other sites

Mine plus the R2 rat feeder have just arrived.

The cons - I asked for an additional 25mm spinner as my old eyes probably won't see the 15mm in the woods but was sent another 15mm one.

The Pros - These are best suited to a young shooter as to get the best from it will take a lifetime. The proverbial brick outhouse springs to mind. Well designed, professionally made and totally impervious to any air rifle pellet.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...