Jump to content

Snap caps.


GJUK
 Share

Recommended Posts

Hello :D

 

So, snap caps. Some people say to use them others say don't bother...

 

Well I've bought some for my gun and I while I wait for them to be shipped to me, I need to find out how to use them...

 

One assumes that you put them in the gun before storage, after cleaning and 'fire' the gun so the firing pin hits the snapcaps, then store the gun? Is that correct?

 

Thanks :good:

Link to comment
Share on other sites

Forget snaps in a modern gun. Their use is historical to the days of hammered leaf springs on old hand made guns.

 

Today, the springs are made of the same steel as the valve springs in your car, and you don't let the head off at night.

 

Valve springs in a car do 50 million reciprocations in their life. Your gun will be knackered after 50,000 firings, and the springs wont even be run in.

 

Snaps have a use, for test firing a gun and for dry fire training, but they do nothing to preserve your gun in storage.

Link to comment
Share on other sites

I bought a nice pair of brass snap caps from the internet after both my shooting instructor and my RFD advised me to use them. They are both my friends and had no reason to lie to me. Especially after I told my RFD I already had them. He said it was a very wise move.

 

After you clean the gun put them in the chambers. Shoot one and then give the stock a knock to simulate recoil. Then fire the second. Store the gun!

Link to comment
Share on other sites

Yes all you lovely customers, I'm the guy with the best snap prices on EBay, and you are all busy buying them off me, I import them in bulk and have the keenest prices, and I've sold literally 1000s !!!

 

And I'm an RFD for 20 years, and I'm a Senior CPSA Instructor, Senior Safety Officer, Referee, and was staff Training and Safety Manger for 5 yrs, and staff tutor for longer - so dont listen to me!!! I think you are wasting your money, but please, oh, please disagree and buy yet more snap caps!! :rolleyes:

 

( Cranfield, you're excused)

Link to comment
Share on other sites

Hammered leaf springs pretty well disappeared at the turn of the 19th Century, .

 

If your gun is nitroproofed, consider it modern

 

If is black powder, Damascus barrel, or has leaf springs not coil springs, then its likely to be 100yrs old and snaps will help.

 

Most guns up to 50 years old can be considered "modern" in their construction and materials used, including the springs.

 

There will be a few die hard exceptions to this in hand made guns, but they will be rare and far between.

 

Bottom line will be any mass produced gun made since WWII will have high quality spring steel that will far outlast many of the other components and wearing items that make up the modern gun

 

Don't forget to vote in the poll now running in this section - we are all interested to see the ration of snap users to non-snappers

Edited by clayman
Link to comment
Share on other sites

Clayman,

 

As a relative newbie to this forum, you need to understand that this one comes up pretty much on a monthly basis.

 

There are always plenty of newcomers to the shooting game who will continue to use these silly bits of plastic or brass, and the gun dealers are laughing all the way to their banks..!! :rolleyes:

 

They do say, "there's no fool like a new fool", certainly true in this case.

 

Cat.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...