marky123

Hiya x100 ppu 22 hornet=£46.90 versus X100 cases =£18.90 X100 bullets =£13.45 X100 primers =£2.60 1x blue dot =£33.80 1x lee kit =£106 1x lee dies =£15.15 1x 22 hornet trimmer length gauge £4 = £193.90 phew the blue dot will give you over 1000 loads though,the dies last forever and you should get loads of use from the cases.Plus you've got your reloading gear for all the other calibers you'll get hth MARK

Hiya Its a very nice target,but £120? Thats a lot of offcuts from the local fabshop. Best of luck anyway MARK

Hiya In humberside I had 243 for deer and fox on land I have permission etc.In lincolnshire where I now reside,its 243 for deer and fox,when carried for deer on land I have permission etc. Whats changed??? MARK

Was that the Hatsan Escort factory?

Hiya Mine's jammed once after 50 cartridges.The cartridge fed out of the magazine,but did not trip the carrier release latch.It's second hand,but has not had a lot of use.My previous auto,a Remington 1100,had a new interceptor latch spring and still jammed occasionally. Incidentally,does everybody know that if you apply the mag cut off and empty the chamber with the action locked back,you can instantly make ready the gun by turning off the cutoff switch(assuming there are cartridges in the mag)?They'll feed out the mag and release the action.

Hiya 6 on monday lincolnshire

Hiya Make sure you can reload fast.One barrel in the drey,then the other for whatever comes running out sharpish. MARK

Hiya Who is selling these please? "baikal mp-153, no faults so far, brand new for about £500" MARK

you would look pretty stupid putting a .17 mod on a .308, and some are designed very calibre specific ~Yes,you would.I should have said chamber specific. My pes is proofstamped .243 and 22.250.It is on my ticket as 'centerfire moderator',shame the op's flo isn't as 'relaxed' MARK

Hiya I would ask the FLO how a moderator can be chamber specific.I would also suggest that if you bought a mod that was previously used on a .308 and you bought it,it would still be a 223 moderator because thats what you are using it on . Hope it works out MARK

I made a knockdown target out of 1/4" plate and 22 vmaxes out of my 222 went straight through from 200yds.I could hear the jacket ricochetting off to who knows where and did'nt shoot it after that.

Maybe.Best I can do is 2/3" at 75m with 5 types of ammo.I've had a go on the trigger,its better,the scope rings are aligned incorrectly however I've mounted them and I've bedded it.Does feed and extract very well though.

Hiya Ruger 77/22 Great bolt,great magazines,ropey trigger,crappy scope mounts,pants stock and not very accurate. MARK

Hiya I think what you may mean is a PES T12.Built like a tank and weighs as much. MARK

Hiya I had two lots of 'sleeping pills'when my now exwife did the dirty.The second lot were actually an antidepressent,but I went to the doctor because I couldn't sleep.Where does that leave me?I wasn't 'depressed' I couldn't sleep. MARK

Hi The shooting of the foxes has been on a different programme ages ago. Still worth a watch. MARK

Lincoln

For sale 1/2 x 20 unf thread well used 20 quid ftf only

tut tut.Should get a quiet one then.

I want a semi auto pigeon gun.I had a cylinder remington 1100 and couldnt hit much with it.I then had a sxs with half and three quarter choke and started to get better results. MARK

Hiya What do you need making? MARK

Hiya Does anyone in Lincolnshire have a garage workbench for sale? Regards MARK

No perhaps its the quality of the brass, some cases you have to reduce the load by 10% because of that. I think its because of the difference in brass internal volume rather than the brass metallurgy MARK

Corrupt and despicable.Hope he gets kidnapped to Iraq. MARK

Is the shotgun barrel in 12 and a half bore?