Jump to content

Views on multi choking a fixed barrel


terrior
 Share

Recommended Posts

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I would go multichoke with Teague, at a cost of about £350 including return delivery, I think you will be close to getting your money back compared with a gun that's choked full, and a lot easier to sell.

Horses for courses I have a MC sporter and am looking to buy a trap gun with tight chokes....
Link to comment
Share on other sites

Hello

Thanks for all your comments.

Yes it's a trap gun which i need because of the higher comb fit.

As far as struggling with closer targets ,

I meant I hit the target but cringe at the damage and cloud of feathers.

Leaving until further away is not always easy for various reasons ( pickers, back guns etc)

So the option of multi choke would give me more choices in different situations.

With it being a high grade gun I was worried about spoiling it.

Cheers and thanks to all.

Link to comment
Share on other sites

If you are intent on going down the multi-choke route - exchange your gun for the same model, with the chokes already converted.

Hello

I hear you

but I have struggled so much to find a gun that fits

And that I get on with.

Even if it stays full choked ,it fits and I am comfortable with it.

So I need to stick with it

That was my issue.

Cheers

Link to comment
Share on other sites

Some good dealers up in the NW Tegure supply the chokes for Miroku http://www.sportingshooter.co.uk/kit-tests/shotguns/gun_test_mk38_teague_choked_miroku_sporter_1_2913080 and there are some "specials" done by teagues http://www.brierleyguns.com/brierley_bloxham/brierley_blox.php This has the teague thin chokes fitted as standard Teague are Gloucestershire but well worth making the trip if you can.

 

What sort of forend (I'm intrigued)

Edited by HDAV
Link to comment
Share on other sites

Hello

When I was looking at buying the gun it has stunning wood work

And obviously a trap , but didn't like the forend.

So the shop sent the forend away to be re machined similar to a sporter

But a unique shape.

Best of all the wood and serial umbers match.

That's why I wouldn't sell it.

Link to comment
Share on other sites

Sounds nice I'm looking for a 32" trap gun but have a limited budget and being a LH shot means I'm struggling to find one at reasonable money with a cast on stock or adjustable I though I had found her but it sold before I got to shoot it, was at gunsmiths this morning and its still on the rack not been paid for.......

Link to comment
Share on other sites

Sounds nice I'm looking for a 32" trap gun but have a limited budget and being a LH shot means I'm struggling to find one at reasonable money with a cast on stock or adjustable I though I had found her but it sold before I got to shoot it, was at gunsmiths this morning and its still on the rack not been paid for.......

Hello

I am left handed too and shoot a rh gun,

don't get hung up on finding a left handed gun,

Most browning and miroku are pretty straight ,

even if you need more or less cast it's not a hard thing to do

Most gun shops will sort it or last resort over the kettle at home.

Cheers

Link to comment
Share on other sites

 

Hello

I am left handed too and shoot a rh gun,

don't get hung up on finding a left handed gun,

Most browning and miroku are pretty straight ,

even if you need more or less cast it's not a hard thing to do

Most gun shops will sort it or last resort over the kettle at home.

Cheers[/quote)

 

Grade 3 & 5 MK38 have an alloy tube which the stock bolt goes through in the wrist of the stock. Try bending one of those without removing the tube at the peril of breaking the stock.

Link to comment
Share on other sites

Yes it's a trap gun which i need because of the higher comb fit.

 

So the option of multi choke would give me more choices in different situations.

 

A lot of trap guns come with full choke in both barrells so you can either leave them as is or have them bored out to your own requirements. If you like the gun and intend to keep it, it would definately be worthwhile considering having it multichoked. This would make it a much more versatile piece of kit. You can then use tight(er) chokes for long shots and open chokes for clos(er) shots. If the cost of having this done is not an issue, then go for it, and Nigel Teague is the best person to do it, and his long thin walled chokes are excellent.

You can also change a pattern by using felt and plas wad cartridges ie: a plas wad cartridge will increase a pattern by approx 1/4 choke over a felt wad through a given barrell.

When I started shooting there was no such thing as multi chokes. Now, both mine are multis and I wouldn't go back to fixed chokes if you paid me. I can shoot skeet, sporting, trap, pigeons, pheasants, etc etc etc all with one gun just by changing the chokes and cartridges.

This is just my view on it and no doubt there will be plenty of other opinions.

Edited by Elmer Fudd.
Link to comment
Share on other sites

A lot of trap guns come with full choke in both barrells so you can either leave them as is or have them bored out to your own requirements. If you like the gun and intend to keep it, it would definately be worthwhile considering having it multichoked. This would make it a much more versatile piece of kit. You can then use tight(er) chokes for long shots and open chokes for clos(er) shots. If the cost of having this done is not an issue, then go for it, and Nigel Teague is the best person to do it, and his long thin walled chokes are excellent.

You can also change a pattern by using felt and plas wad cartridges ie: a plas wad cartridge will increase a pattern by approx 1/4 choke over a felt wad through a given barrell.

When I started shooting there was no such thing as multi chokes. Now, both mine are multis and I wouldn't go back to fixed chokes if you paid me. I can shoot skeet, sporting, trap, pigeons, pheasants, etc etc etc all with one gun just by changing the chokes and cartridges.

This is just my view on it and no doubt there will be plenty of other opinions.

Spot on

Thanks for that

(When you start a topic it seems to side track)

I think a lot of points are covered

Thanks for all the feed back

Link to comment
Share on other sites

can i just make a small comment if you go ahead and can i would have the longer chokes they are so much better . I did and don't regret it .

It sounds like a gun your going to keep for many years so I would say go for the long chokes if you do get it teagued.

Link to comment
Share on other sites

I costed up putting Teagues into my Beretta 687 game gun and easing the forcing cones, from memory we were in the £400 area about 6 years ago.

 

In the end I found a used set of barrels on Guntrader from a 686, these were identical except were more open choked, £150 for the barrels and £50 to my gunsmith to ensure they fitted OK.

 

Miroku are a popular gun, there is every chance of finding a used set of barrels that should fit, for average driven birds get those bored out to 1/4 or Improved cyl and 1/2 and away you go.

 

 

A

Link to comment
Share on other sites

Hello

I hear you

but I have struggled so much to find a gun that fits

And that I get on with.

Even if it stays full choked ,it fits and I am comfortable with it.

So I need to stick with it

That was my issue.

Cheers

You obviously like the gun and shoot well with it

 

So I would ignore all the advice about changing it,

 

If it was me I would go down the Teague route

 

Whatever you do We NEED to see pics of the forend ....lol

 

Good luck with finding what you want, whether its Teague or new barrels

 

:shaun:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...