Neil23 Posted July 24, 2018 Report Share Posted July 24, 2018 So my lad got his armsan 20g today for his bday had it out for an hour earlier this morn just to give it a go and he finds it a tad difficult to pull the operating handle back at times was wondering if I can get a custom one from anyway as I've seen others with larger ones fitted. Thanks folks Quote Link to comment Share on other sites More sharing options...
lancer425 Posted July 24, 2018 Report Share Posted July 24, 2018 Try and get a bigger tactical bolt handle, i am not armsan clued up but they might do a tactical model and have the bolt handles in the parts list. Quote Link to comment Share on other sites More sharing options...
snow white Posted July 24, 2018 Report Share Posted July 24, 2018 Just looked on chambers thay have two i think the one you wsnt is LT006 Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 24, 2018 Author Report Share Posted July 24, 2018 1 hour ago, lancer425 said: Try and get a bigger tactical bolt handle, i am not armsan clued up but they might do a tactical model and have the bolt handles in the parts list. 1 hour ago, snow white said: Just looked on chambers thay have two i think the one you wsnt is LT006 Cheers lads is that chamber a custom parts supplier is it. LT006 where did you find that out snowwhite? Quote Link to comment Share on other sites More sharing options...
lancer425 Posted July 24, 2018 Report Share Posted July 24, 2018 (edited) They do tactical gun look on here it might just have what you want if it fits the 620 and be able to get it through the importers perhaps. http://static.armsan.com/media/catalogs/2018_Armsan_Tactical_Catalog.pdf Edited July 24, 2018 by lancer425 Quote Link to comment Share on other sites More sharing options...
Wingman Posted July 25, 2018 Report Share Posted July 25, 2018 Been looking for an oversized bolt handle for my Armsan 612 for ages, havent been able to find anything, so interested in this! Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 25, 2018 Author Report Share Posted July 25, 2018 Well let me know if you have any look ? Quote Link to comment Share on other sites More sharing options...
lancer425 Posted July 25, 2018 Report Share Posted July 25, 2018 If i were you start by asking the question here, from what i could find out on my phone it looks like these are the importers, they might have the part or be able to get you it. sales@highlandoutdoors.co.uk sales@highlandoutdoors.co.uk sales@highlandoutdoors.co.uk Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 25, 2018 Author Report Share Posted July 25, 2018 18 hours ago, snow white said: Just looked on chambers thay have two i think the one you wsnt is LT006 1 minute ago, lancer425 said: If i were you start by asking the question here, from what i could find out on my phone it looks like these are the importers, they might have the part or be able to get you it. sales@highlandoutdoors.co.uk sales@highlandoutdoors.co.uk sales@highlandoutdoors.co.uk Just been speaking to the guy at chambers on the phone there and he says they don't do anything such as the larger than standard operating handle it'll probably be a custom job...the only reason they have quite a bit in the line of armsan parts is because they bought them from another company/shop what was closing down as a joblot. Also says the armsan parts were usually were quite hard to get and were always silly money. Quote Link to comment Share on other sites More sharing options...
snow white Posted July 25, 2018 Report Share Posted July 25, 2018 Ok neil for how much thay are i would get one and find a machine shop and ask them to make you one with longer handel or see if somebody could make nice weld job on the brought one then when you come to sell you have origenal one to put back in. Tony Quote Link to comment Share on other sites More sharing options...
tx4cabbie Posted July 25, 2018 Report Share Posted July 25, 2018 Speak to daveyted on here, he has an armsan612, and has made a fantastic enlarged bolt handle for his - really nice job, and according to him, easy, though to be fair his "easy" would be my "I've ruined it." Quote Link to comment Share on other sites More sharing options...
Sco77w Posted July 28, 2018 Report Share Posted July 28, 2018 I have a 'tactical' boli handle on my 612. i got it direct from Armsan in Turkey. It wasn't easy and i'm sure i have a spare somewhere that i may be persuaded to part with. I'll see if i can find it out. In reality it isn't much bigger but its rounded and easier in your hand. Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 28, 2018 Author Report Share Posted July 28, 2018 4 hours ago, Sco77w said: I have a 'tactical' boli handle on my 612. i got it direct from Armsan in Turkey. It wasn't easy and i'm sure i have a spare somewhere that i may be persuaded to part with. I'll see if i can find it out. In reality it isn't much bigger but its rounded and easier in your hand. I noticed two bolt handles on the site I was looking at but I thought they were the same as the look very similar.at the moment I've just pushed some hard plastic pipe over it just to make it easier on his hand. I'd put a phot or up on here but I find it a nightmare to post pics..sometime it works sometimes it don't. ? Quote Link to comment Share on other sites More sharing options...
Wingman Posted July 29, 2018 Report Share Posted July 29, 2018 (edited) Just a thought but seeing as the 612/620 are basically identical to the Beretta A302/3 series could you use a bolt handle (or other parts) for a beretta on the armsan? like this? https://www.brownells.co.uk/TACTICAL-SHOTGUN-BOLT-HANDLE-Beretta-303-390-391-Bolt-Handle-BRILEY-AL391-Urika-129000258 Edited July 29, 2018 by Wingman Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 29, 2018 Author Report Share Posted July 29, 2018 (edited) The fitting bit what inserts into the gun looks fairly different to that of the berretta..armsan type is more or less flat on one side with a bit of a radius/semi circle on the other side. They not that cheap for what they are though don't you think . Edited July 29, 2018 by Neil23 Correction Quote Link to comment Share on other sites More sharing options...
Sco77w Posted July 29, 2018 Report Share Posted July 29, 2018 Found it, this is it along side a standard A612 handle. no idea if it would fit a 620 tho. Quote Link to comment Share on other sites More sharing options...
Neil23 Posted July 29, 2018 Author Report Share Posted July 29, 2018 Or right ... the shape is just the same as the a620 looking at it. There's a a612 in my local gun shop and I know his wife shoots an a620 I'll ask him to try it . Quote Link to comment Share on other sites More sharing options...
Sco77w Posted July 31, 2018 Report Share Posted July 31, 2018 Let me know how you get on, I'll keep hold of it til then. Quote Link to comment Share on other sites More sharing options...
Neil23 Posted August 6, 2018 Author Report Share Posted August 6, 2018 On 31/07/2018 at 17:19, Sco77w said: Let me know how you get on, I'll keep hold of it til then. Message sent Quote Link to comment Share on other sites More sharing options...
ditchman Posted August 6, 2018 Report Share Posted August 6, 2018 On 29/07/2018 at 16:47, Sco77w said: Found it, this is it along side a standard A612 handle. no idea if it would fit a 620 tho. you could get someone to silver solder a nice bit of plate on that...then shape it..and polish.... Quote Link to comment Share on other sites More sharing options...
Neil23 Posted August 6, 2018 Author Report Share Posted August 6, 2018 Apparently they do fit ditch so I was told 25 minutes ago, ditchman said: you could get someone to silver solder a nice bit of plate on that...then shape it..and polish.... Quote Link to comment Share on other sites More sharing options...
ditchman Posted August 6, 2018 Report Share Posted August 6, 2018 Just now, Neil23 said: Apparently they do fit ditch so I was told oh good...that will be much sweeter on little fingers.. Quote Link to comment Share on other sites More sharing options...
Saltings Posted August 7, 2018 Report Share Posted August 7, 2018 or keep it simple get a piece of dowel about 4"long drill a hole in the middle and put a piece of cord through to form a loop so he can hook it on use it then put in his pocket when not in use and use as needed a bit like a lawnmower handle Quote Link to comment Share on other sites More sharing options...
Neil23 Posted August 8, 2018 Author Report Share Posted August 8, 2018 At the moment I've just got a piece of hard plastic pipe warmed it with a flame then forced it on the handle..makes it a bit more comfortable for him although it would be nice to get the propper job then it just looks right. Quote Link to comment Share on other sites More sharing options...
Charlie Anderson Posted August 24, 2018 Report Share Posted August 24, 2018 That’s quality. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.