Jump to content

Generator recommendations


Recommended Posts

Hi chaps 

got to do some building work involving the cement mixer (electric bell type) that works fine and always starts 😊along with assorted power tools that will inevitably need charging and a 240 chopsaw 

however where were working there’s no power 

so recommend me a generator please think suitable for a building site 

many thanks 

of 

Link to comment
Share on other sites

7 minutes ago, Old farrier said:

How many kw do you think I should go for 3? Or more 

As Andy H said bigger the better

 

6 minutes ago, Andy H said:

Honda as well also look  at the largest motor you are going to run ie chop saw 1800w  and get a bigger size genny 2500w or 3000w.

 

Link to comment
Share on other sites

6 minutes ago, udderlyoffroad said:

Whatever model you get, do yourself and your lads a favour and earth the thing.  Generators have no reference to earth and that lug provided on the frame isn't there to look pretty.

Thanks for the advice it’s taken onboard 😊👍

Link to comment
Share on other sites

I would always say honda for a generator but now I would probably say one of the solar battery generators may be more useful. The bigger ones will easily run a mixer all day without any solar and you can use them in the van and all sorts of places or at home for power cuts.

Link to comment
Share on other sites

39 minutes ago, bigroomboy said:

I would always say honda for a generator but now I would probably say one of the solar battery generators may be more useful. The bigger ones will easily run a mixer all day without any solar and you can use them in the van and all sorts of places or at home for power cuts.

Many thanks I’ll check them out 😊👍

any particular recommendations 🤔

Link to comment
Share on other sites

There are lots of them but ecoflow is the big player or I have had good luck with Anker electronics so far. You need to think about over all capacity eg can it run what you want all day and also it's peak output. A mixer probably only needs 300-500w but to run big circular saws and power tools you probably need a peak output over 1800w

Link to comment
Share on other sites

On 04/01/2024 at 22:16, bigroomboy said:

There are lots of them but ecoflow is the big player or I have had good luck with Anker electronics so far. You need to think about over all capacity eg can it run what you want all day and also it's peak output. A mixer probably only needs 300-500w but to run big circular saws and power tools you probably need a peak output over 1800w

Many thanks for the information 😊👍

Link to comment
Share on other sites

17 minutes ago, Stan79 said:

I’ve got a Honda EU20i. 
 

Small, portable, can run chop saw, mixer, radio, dewalt charger, etc, etc. Small and powerful. Much easier than a full sized generator based on your needs. 

Many thanks for your reply I shall check it out 😊👍

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...