Jump to content

More HMR Rabbits - Graphic - Headshot


ShaggyRS6
 Share

Recommended Posts

Well the HMR seems to be getting better with more rounds going through it. Nick told me to see if it was floated using the £10 note trick. Not really sure what I am looking for but I assume i should be able to get a Tenner in between the wood and the barrell. If I start at the forward part of the stock the tenner fits in the gap for about 6 inches, then gets stuck. Not sure what to read into that.

 

Anyhoos, I got a total of 7 this arvo. The head shot one I have never seen the likes of myself. I fired and saw red mist (first time for me) it then dropped in its hole. I went to get it and there was smoke comming from the hole? Assuming the bunny. Pics below.

 

101.jpg

 

102.jpg

Link to comment
Share on other sites

Something I forgot to mention.

 

The first warren I worked was pretty amazing. Why? Well I was working it with a stote. I was like being at a shooting gallery. I wondered why rabbits ketpt appearing very regularly, even though i was making a noise with the gun often.

 

then this little orange thing was nutting about at the speed of light. So I let him work the warrens and picked off whatever he flushed out. After about 10 mins (and 5 rabbits) he was off :good: Pretty amazing. Flushed better than any Ferret I've seen :good:

Link to comment
Share on other sites

I am guessing they were shot with balistic tips? Great little round.

 

The hollow points actualy dont make as much mess as the BT's though you get more shoot throughs with them.

 

That second rabbit does not look that old, late kit from last year by the looks of it.

 

Nice shooting, today was perfect HMR weather, still and bright!

 

Jerry

Link to comment
Share on other sites

Blimey an FEO who knows what he's talking about!

As said the V-max are the more damaging round and the safer ones because of the way they fragment, that said because of the rapid deformation they put most of the energy thay have into the rabbit hence the damage you see and hear, The nice bit about it is the rabbit is simply dead though to eat you do need head shots really. The longer shots will come with more practice, one things for sure the round is certainly capable of them. Might be worth doing a bit more practice on paper though at the longer ones till you are making the shots every time

Link to comment
Share on other sites

Top tips Alex. I was going for body shot on most of them, these outings have been m first real test of the gun on quarry. Because on some of the body shots you can see an entry or exit I was gutting them and finding a right old mess inside. Excrement everywhere. It took me 5 gutted rabbits until i realized that it was not my gutting that was the issue, it was what the round was doing inside :good: I really did not think they would do the damage they do.

 

You live and learn :good:

Link to comment
Share on other sites

If you're just out to kill rabbits which i do some of the time on certain permissions with a problem where all the farmer wants is them shot then I will take front end body shots, simply for speed of getting on them and certainty of a kill, plus from a vehicle it makes it slightly more difficult. If its for the table then head shots are the way forward. Its a very very good little round for pest control and you're finding its plus points at the moment it puts rabbits down very humanely. Ok it does some damage but I've seen far too many shot with a .22lr that have got away to die thats very rare with the hmr with the Vmax rounds. Its one of the reasons I don't use the hollow points for rabbits or foxes, it creates a very small hole and punches straight through which if you fluff the shot a bit or get a flyer doesn't kill. Do it with a Vmax and as you've found there is so much damage that death is still pretty instant.

Link to comment
Share on other sites

just keep putting in the time mate and the 100 yard + will come.

best shot ive had so far was at night 140 yards ranged head shot :lol:

he went down with out a twitch :lol: i love the 17 gr bt bullets.

ive tryed hollow points and ive tryed 20gr hollow points but just stick to 17gr bt now

Link to comment
Share on other sites

Not really sure what I am looking for but I assume i should be able to get a Tenner in between the wood and the barrell. If I start at the forward part of the stock the tenner fits in the gap for about 6 inches, then gets stuck. Not sure what to read into that.

 

get a piece of fine sand paper mate and take off abit where its touching the barrel. BUT dont forget to clear varnish

it after as the wood will be exposed else. just take your time and do alittle bit then try it and so on and so on :lol:

Link to comment
Share on other sites

Once you have got used to your rifle you will probably find that it will be capable of groups of 0.75" at 100 yards, and this roughly equals the kill area on a rabbits head.

 

So, head shots at 100 yards will be the norm - providing that there is not too much wind!

 

Pushing the range beyond this will simply increase the group size, and so head shots will become more problematical - you could easily hit the rabbit in the jaw/nose area that will not result in an instant kill. So, forget it.

 

Body shots at 150 yards are fairly easy if it is a simple rabbit reduction exercise and not shooting rabbits for the pot.

 

Don

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...