Steel100

Thanks to everyone for their replies. I'll probably, end up going for a high set of rings and 'trying b4 buying'. Cheers Andy

As it says, really. I've just become the very happy owner of a s/h (but very tidy) .22 Hornet CZ527. Naturally, I wish to mount some glass. I'll probably be looking for a fixed power Meopta, or similar. However, I need suitable rings. I believe several companies including Warne and CZ have suitable 1" rings but I'd welcome any thoughts on which rings are the best - I'll presumably, need medium or high rings to accommodate a 50 or 56mm objective. I'd be very grateful for any advice / opinions etc. Kind regards Andy

I bought one of these magazines brand new last year for a rifle which I'd bought at auction - without a magazine. They were available either from the importers (through your friendly RFD) or direct from the CZ internet shop. I've just checked and they have stopped listing them. You might be lucky and Edgar Bros. might still have one or two! Andy

That cheap! Look at some of the top end skiing jackets or the Belstaff range. You can easily pay eight or nine hundred if you are that way inclined! A

Debaser, Pretty much the same. I have mine for target / practical shotgun. 250 to buy and 300 to hold. Cheers Andy

Frenchieboy, The HO seem to have 'archived' the 2002 Guidance in preparation for the changes to it which will shortly take place. The new version of Guidance will just be on-line and should be available by next Spring. They've actually brought in additional staff to work on the project - I may be naive but I actually believe them on this occasion! To return to your original question, either click on the enclosed link or visit the BASC website and go from there. http://www.basc.org.uk/en/utilities/document-summary.cfm/docid/ACC5F2E1-E925-4D8C-8CD197523083F073 Hope this helps. Andy

Kyska, You may already have seen this, it gives an unambiguous answer on one of the main points. It is well worth downloading a copy of Guidance. It is to be updated early next year: Chapter 6 EXEMPTIONS FROM THE REQUIREMENT TO HOLD A CERTIFICATE Borrowed rifles on private premises 6.16 Section 16(1) of the 1988 Act enables a person to borrow a rifle from the occupier of private premises and to use it on those premises in the presence of either the occupier or their servant without holding a firearm certificate in respect of that rifle. It should be noted that this gives slightly more flexibility in the use of a borrowed rifle than is permissible with the use of a shot gun as described in paragraph 6.14, in that the borrowed rifle can also be used in the presence of the servant of the occupier. However, the occupier and/or their servant must hold a firearm certificate in respect of the firearm being used, and the borrower, who must be accompanied by the certificate holder (whether it is the occupier or their servant), must comply with the conditions of the certificate. These may include a safekeeping requirement and, in some cases, territorial restrictions. Section 57(4) of the 1968 Act defines “premises” as including any land. The effect of the provision is to allow a person visiting a private estate to borrow and use a rifle without a certificate. The exemption does not extend to persons under the age of 17 or to other types of firearm. There is no notification required on the loan of a firearm under these circumstances. A borrowed rifle should not be specifically identified as such on a “keeper’s” or “landowner’s” firearm certificate. The term “in the presence of” is not defined in law but is generally interpreted as being within sight and earshot. 6.17 Section 16(2) of the 1988 Act provides for a person borrowing a rifle in accordance with section 16(1) of the 1988 Act to purchase or acquire ammunition for use in the rifle, and to have it in their possession during the period for which the rifle is borrowed, without holding a certificate. The borrower’s possession of the ammunition must comply with the conditions on the certificate of the person in whose presence they are and the amount of ammunition borrowed must not exceed that which the certificate holder is authorised to have in their possession at that time. It should be noted that the borrower may only take possession of the ammunition during the period of the loan of the rifle at which time they will be in the presence of the certificate holder. If the persons selling or handing over the ammunition are not certificate holders, it may be necessary for them to see the certificate to satisfy themselves that the terms of this section have been met and that the amount of ammunition the borrower wishes to acquire is no greater than that which the certificate holder is authorised to possess. However, the details of the transaction need not be recorded on the certificate. Rgds Andy

Simon, The real 'proof of the pudding' on this one will be the new 'Guidance', we'll then see how this Response to the Report is going to be interpreted. Some work now needed by BASC, BSSC and others to influence changes to Guidance. Watch this space! Regards Andrew

Your RFD should be able to order one from the importers. Be warned, as with everything Benelli they are expensive! Alternatively, I remember that someone put up a link to a gun shop in Italy who could supply spares directly at more sensible prices. Enjoy your SN Andy

As far as pump action guns are concerned, the Supernova must rank at the very top in terms of design, style, functionality etc. I've owned one for a few years now and have used mine mostly with rifled slug ammo. Personally, I view it as a top quality 'tool' which does exactly what is intended. (I also think it is very ugly!) No doubt someone will come up with a better pump but at the moment I really see it as being 'numero uno' if you need / want a modern pump gun. Andy

I believe that Fawcetts - info@fawcettsonline.com are or were the Breda importer, if that is any help. At one time you could buy extension tubes for some of the Breda's to take them up to 7 or 8 shot. Rgds Andy

Mickmep, Thank you for pulling me up on that. You are quite correct, I really don't know what I was thinking! What I should have said, is that smooth-boring a rifle does not , necessarily, make it into a shotgun in the eyes of the law. There are issues of barrel length, magazine capacity and chambering which need to be taken into account. Cheers Andy

I cannot remember if Marlin ever did this as a factory option, but Winchester certainly did. They offered a Winchester 94 in .410 It would therefore, be theoretically possible. However, UK law generally does not allow backward conversion i.e. if you convert a s1 firearm into a s2 shotgun it still retains s1 status in the eyes of the law. Also, dependant upon which frame size was used you may not be able to make the conversion work. Small frames such as the 1894 would probably only convert to .38/.357 or .44 shotgun. Large frames such as the 336 size might offer a better platform BUT why do it? It will still be classed as a s1 or s5! Also, consider barrel length - if you get it wrong you will have converted a s1 firearm into a s5 prohibited weapon. Regards Andy

Sorry if it sounds a bit of a glib answer but, ' it's worth what the man will pay for it.' Seriously, you could go to an auctioneer with experience selling English shotguns and get a valuation - they will probably charge a %age of the value. Problem is, look at the guide prices at the auctions and then look at the selling prices realised. They are often quite a lot out. Look at the online auction catalogues to get a 'feel' and be honest when you assess the condition. I suspect that after you'd looked through the guide prices and realised prices for two or three auctions (Holt's, Bonhams, Gavin Gardiners etc.) you'll be able to make a guesstimate which will be as good as theirs'. Back to the issue of the antique (short-chambered) ten coming off licence. If you know a helpful dealer he might be prepared to put it through his books for a nominal sum i.e. you give him a s2 10 bore shotgun which he takes in to stock, then writes it off his books as an antique and gives it back to you as an antique. After all many an RFD would be happy to sell you an antique s58.2 shotgun without a certificate, as a 'wall-hanger'. Hope you manage to get this issue sorted out! Andy

Short chambered 10 bores are s58.2 The only issue would be if you had ammunition. At that stage local police could get uppity, otherwise it simply is not an issue. Inform them that you require the gun to be taken off certificate at the upcoming renewal. Refer them to Guidance if they have a problem and as has been said if they are still being obstructive talk to BASC. Your FEO is clearly very ignorant and doesn't have a leg to stand on. All the best Andrew

SidneyG, I agree with Blaser F3 and the the quoted article. I've taken firearms abroad through UK airports on several occasions. Have all paperwork in order (don't forget good insurance), including airline authorisation IN WRITING. Add an hour to check in. On the issue of cases. I would use a specific transit case and not the one the gun came in. Be absolutely certain that your case WILL get abused. As an example, the first time I took guns, we used an 'airline-approved' hard case costing about £90 with aluminium reinforced corners and plastic covered plywood sections. in addition to two built in locks we used luggage straps. After two journeys - four check-ins, it was no longer usable. The suggestion of Americase or alternatively, a Peli case cannot be faulted. They are well constructed, airline approved, heavy and expensive. They are also used by police, military and professionals because they actually work. If your case bursts open in transit, the hassle and cost will make getting a quality case in the first place seem a cheap option! Also, remember that if you go to, or transit through the USA they require TSA-approved locks, for which they have a master-key. Ignore this and they may use a different type of 'master-key' to gain access! Enjoy your trips, Andrew

Martyn, I think that they said, 'Early summer'. I agree. I was anticipating a response during the first half of June. Nothing at the moment. Either they are keeping very tight lipped or they've not made any firm proposals (which might get leaked). We'll just have to wait and see. Andy

Well, I'm going to stick my neck out here! Prior to the incident in Cumbria there was serious discussion concerning the re-introduction of .22" pistol shooting. Remember, a small number of 'elite' shooters have .22" and .32" target pistols on s5 authority for competition. If we don't have a major, amok-shooting incident with legally held firearms, I think that it is possible that some (very limited) target shooting with pistols could come back within the next five to ten years. The next thing to wait for is the report in Parliament concerning Cumbria, which is scheduled for the first half of June. ... and if I'm wrong , I won't eat my hat! Andy

Sam, The NRA (and probably the NSRA too) run instructing and coaching courses plus associated teaching materials. I would suggest one of them as a starting point as you will need to check out the insurance implications for yourself. I did an NRA Club Instructor (General Skills) Course. There is also a Club Instructor (Target Rifle) Course. The next step up is, I believe, the Club Coach. I know that the NRA manual has to be purchased from them and is copyright. Give me a shout if you need any info. Cheers Andy

Pat, I have recently acquired a P-W 375 Duomatic and I rang the factory re accessories and spares. He confirmed that there isn't a dealer over here. Only suggestion that I can make is trying Clay and Game at Hull. They used to advertise wad guides which are supposed to fit P-W m/cs. However, I don't see them in their more recent online catalogue. Sorry, but you may have to pay the exorbitant US postage fee! All the best Andy

Asking on behalf of a friend. Need a complete interchangeable 10 gauge tool head / tool set for a Ponsness-Warren 375 Duomatic reloading m/c. North Derbys. / S. Yorkshire but can travel to collect. Thanks Andy

Have you tried South Yorkshire Shooting Supplies, near Barnsley? They used to stock the Taurus LBRs Andy

Redgameshot, The license free radios (PMR446) which are readily and cheaply available are great but both those and even more powerful licensed UHF radios sometimes give comms. difficulties once you get into hilly terrain i.e. you are at one side of the hill and your shooting partner has moved around the other side. Personally, in that sort of scenario I'd be more inclined to use VHF (2 Metre) radios. If you have a shooting syndicate or group you can apply to Ofcom for a 'Simple UK' licence (the licence is not available for individual use). It costs £75 for five years and you can then buy commercial VHF / UHF hand-held 'walkie-talkies'. There are plenty of dealers who will then sell you either new or second hand radios programmed appropriately. Hope this helps Andy