SPARKIE Posted August 8, 2015 Report Share Posted August 8, 2015 me and fruitloop spent the afternoon knocking up some .410 reloading dies for resizing and pressing primers in and out from stainless roundbar...... I then decided to knock up a thread cover/muzzle brake for my .17ackley hornet. I don't know if it will cause any accuracy issues so will have to try it out. Quote Link to comment Share on other sites More sharing options...
team tractor Posted August 8, 2015 Report Share Posted August 8, 2015 He likes his toys to make stuff with. Looks a top job again Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted August 8, 2015 Author Report Share Posted August 8, 2015 Cheers nath Quote Link to comment Share on other sites More sharing options...
Underdog Posted August 9, 2015 Report Share Posted August 9, 2015 Tidy. Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted August 9, 2015 Author Report Share Posted August 9, 2015 Thanks gonna put them to the test today and do some reloads Cheddite primers Fibre wads Lil gun Haven't made my mind up on homemade shot yet well how much will see how much goes in a 2.5" shell looking about 16gram and roll turn tops Quote Link to comment Share on other sites More sharing options...
la bala Posted August 9, 2015 Report Share Posted August 9, 2015 Nice work, we should all have a lathe, I am still waiting for someone to buy me one. Quote Link to comment Share on other sites More sharing options...
reggiegun Posted August 9, 2015 Report Share Posted August 9, 2015 Nice work lads. 410 reloading set looks good, I bet a few off the forum would pay for them to made. Quote Link to comment Share on other sites More sharing options...
team tractor Posted August 9, 2015 Report Share Posted August 9, 2015 Rob can you make me a new pair of legs Quote Link to comment Share on other sites More sharing options...
Underdog Posted August 9, 2015 Report Share Posted August 9, 2015 You can get 21g inside a 2&1/2" case. Quote Link to comment Share on other sites More sharing options...
reggiegun Posted August 9, 2015 Report Share Posted August 9, 2015 Rob can you make me a new pair of legs Couldn't do any worse than them wobbly ****ers you got now Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted August 9, 2015 Author Report Share Posted August 9, 2015 (edited) I'll make a start nath got a schematic these are the mk1 then we can get some adjustments made until the required legs are ready....here's the mk1 for now. The mark 2 here being modelled by max Edited August 9, 2015 by SPARKIE Quote Link to comment Share on other sites More sharing options...
SPARKIE Posted August 9, 2015 Author Report Share Posted August 9, 2015 The mk3 modelled by Wallace Quote Link to comment Share on other sites More sharing options...
team tractor Posted August 9, 2015 Report Share Posted August 9, 2015 (edited) I'd like to be 2" taller please The mk3 modelled by Wallacethats no good for me I can't lift my leg that high and that's your waist size not mine Edited August 9, 2015 by team tractor Quote Link to comment Share on other sites More sharing options...
Lloyd90 Posted August 9, 2015 Report Share Posted August 9, 2015 Can you make an "invisible thread protector" that you put on your rifle when the mods off and it looks like its not screw cut Quote Link to comment Share on other sites More sharing options...
Dougy Posted August 9, 2015 Report Share Posted August 9, 2015 Can you make an "invisible thread protector" that you put on your rifle when the mods off and it looks like its not screw cut Like this one ? Fruity did one for me a while ago, but I cant find it, I am sure my Mrs has been in my room tidying up. She says she hasn't seen it but I don't believe her Quote Link to comment Share on other sites More sharing options...
Lloyd90 Posted August 9, 2015 Report Share Posted August 9, 2015 Like this one ? Fruity did one for me a while ago, but I cant find it, I am sure my Mrs has been in my room tidying up. She says she hasn't seen it but I don't believe her Pictures not loading for me :( hopefully just because I'm on my phone. Can you just get one made as I'd love one for my 243 Quote Link to comment Share on other sites More sharing options...
Dougy Posted August 9, 2015 Report Share Posted August 9, 2015 Quote Link to comment Share on other sites More sharing options...
reggiegun Posted August 9, 2015 Report Share Posted August 9, 2015 (edited) Pictures not loading for me :( hopefully just because I'm on my phone. Can you just get one made as I'd love one for my 243 Below is a photo of mine Nice isn't it Edited August 9, 2015 by reggiegun Quote Link to comment Share on other sites More sharing options...
Dougy Posted August 9, 2015 Report Share Posted August 9, 2015 Your's is similar to mine but with more holes in, did you ask for more, and how much was it. I must say I prefer your's Quote Link to comment Share on other sites More sharing options...
reggiegun Posted August 9, 2015 Report Share Posted August 9, 2015 Your's is similar to mine but with more holes in, did you ask for more, and how much was it. I must say I prefer your's yea tried extra holes so you don't see as much steel, cost was £35 Quote Link to comment Share on other sites More sharing options...
la bala Posted August 9, 2015 Report Share Posted August 9, 2015 Below is a photo of mine Nice isn't it Yep, really like it Quote Link to comment Share on other sites More sharing options...
team tractor Posted August 9, 2015 Report Share Posted August 9, 2015 You'll notice the hmr one is totally different to the lr thread protector he's made me This is the hmr And this is the lr You'll notice the hmr is for the heavy barrel Below is a photo of mine Nice isn't it That's a beauty Quote Link to comment Share on other sites More sharing options...
Underdog Posted August 9, 2015 Report Share Posted August 9, 2015 Tend to be to light the invisible ones do so I have them twice the size to make up. Quote Link to comment Share on other sites More sharing options...
Fisheruk Posted August 9, 2015 Report Share Posted August 9, 2015 What lathe do you have, mate Quote Link to comment Share on other sites More sharing options...
tonker Posted August 9, 2015 Report Share Posted August 9, 2015 Below is a photo of mine Nice isn't it Had two of them ! but I put them down somewhere, and you guessed it , now can't find either Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.