Ultrastu Posted March 27, 2018 Report Share Posted March 27, 2018 So i bought this scorpion 10t today To turn it into a bullpup .i will log my progress here . Cheers Quote Link to comment Share on other sites More sharing options...
Mice! Posted March 28, 2018 Report Share Posted March 28, 2018 Be following with interest Stu, its not a .25 calibre is it? When its done see if bsa want to buy your ideas. Quote Link to comment Share on other sites More sharing options...
figgy Posted March 28, 2018 Report Share Posted March 28, 2018 4 hours ago, Mice! said: Be following with interest Stu, its not a .25 calibre is it? When its done see if bsa want to buy your ideas. Mice i am sure BSA have released a Bullpup, you can also buy Bullpup stock kits for most guns. Craftsman Vit is one sells through BAR. Look forward to seeing your build Ultrastu Quote Link to comment Share on other sites More sharing options...
Mr.C Posted March 28, 2018 Report Share Posted March 28, 2018 Be very interested to see what you do with the trigger. I'll be following this post. Quote Link to comment Share on other sites More sharing options...
Mice! Posted March 28, 2018 Report Share Posted March 28, 2018 44 minutes ago, figgy said: Mice i am sure BSA have released a Bullpup, you can also buy Bullpup stock kits for most guns. Craftsman Vit is one sells through BAR. Look forward to seeing your build Ultrastu reason stu is doing it figgy is because of his disgust with what bsa have done regards their bullpup. Bit of winding up on another thread, now its time to sit back and learn. Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted March 28, 2018 Author Report Share Posted March 28, 2018 Thanks guys. The plan isnt to make it too complicated .i want a short, light gun that i can throw in the decoy bag .for when the best shot on a pige is with an airgun .so as its to be used and abused a bit .i didnt want to spend a lot of money on a ready made pup. The scorp ,as seen, was 350 quid. Think the extra bits i need shouldnt be much more than £50 .so £400 total should be ok by me. I plan on keeping the rear bolt where it is. And face on the breech block. Stu 1 hour ago, figgy said: Mice i am sure BSA have released a Bullpup, you can also buy Bullpup stock kits for most guns. Craftsman Vit is one sells through BAR. Look forward to seeing your build Ultrastu There isnt an aftermarket pup conversion for any bsa. The bar ones are for hw s .aas . Benjamins .hatsan etc . Quote Link to comment Share on other sites More sharing options...
figgy Posted March 28, 2018 Report Share Posted March 28, 2018 (edited) Wonder why they never made one for a BSA, as for face on breech block you could put a gel comb raiser on it soften it up a bit. Edited March 28, 2018 by figgy Quote Link to comment Share on other sites More sharing options...
winnie&bezza Posted March 28, 2018 Report Share Posted March 28, 2018 Interesting one. Looking forward to seeing it. Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted March 29, 2018 Report Share Posted March 29, 2018 yup gonna follow this Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted March 29, 2018 Author Report Share Posted March 29, 2018 cheers . Well today i shot a variety of pellets at 22 yds in my garden and it shot virtually everyting through one hole .so its not pellet fussy . Which is great news for a 10 year old pcp . 5 shot groups Quote Link to comment Share on other sites More sharing options...
Guest Posted April 1, 2018 Report Share Posted April 1, 2018 Just proves that the BSA engine room is good Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 13, 2018 Author Report Share Posted April 13, 2018 (edited) Just had a play with some ideas last night getting a feel for it . Edited April 13, 2018 by Ultrastu Quote Link to comment Share on other sites More sharing options...
amateur Posted April 13, 2018 Report Share Posted April 13, 2018 Do you shout "BANG" whilst pretending to pull the trigger? Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 13, 2018 Author Report Share Posted April 13, 2018 No i go "futtt " when i DO pull the trigger. Quote Link to comment Share on other sites More sharing options...
Walker570 Posted April 13, 2018 Report Share Posted April 13, 2018 Thought you mispelt that as you saw the squirrel exit left Quote Link to comment Share on other sites More sharing options...
Guest stevo Posted April 13, 2018 Report Share Posted April 13, 2018 The Bisley mags look very tidy there stu , they where always my go to in .177 ??? Quote Link to comment Share on other sites More sharing options...
Mice! Posted April 13, 2018 Report Share Posted April 13, 2018 you know you can't reach the trigger don't you Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 13, 2018 Author Report Share Posted April 13, 2018 The is soo light i cant feel it . Its gonna be 610 mm in length with out the stumpy mod and 700 mm with it Quote Link to comment Share on other sites More sharing options...
Guest Posted April 14, 2018 Report Share Posted April 14, 2018 I'm a bit confused with the location of your hands in relation to the trigger and breech. What's the plan exactly? Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 14, 2018 Author Report Share Posted April 14, 2018 So the new (second ) trigger goes where my hand is and a linking rod goes back to the original trigger .What the pic shows is eye relief and scope positioning . Basically the stock will be shortened by 200 mm from the butt and moved forwards . Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 20, 2018 Author Report Share Posted April 20, 2018 Trigger linkages Quote Link to comment Share on other sites More sharing options...
Mice! Posted April 20, 2018 Report Share Posted April 20, 2018 can you tell at this stage how the trigger will feel being done like this? Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 20, 2018 Author Report Share Posted April 20, 2018 Yeah the last one is sweet . A touch heavier than standard cos it now has 2 triggers and springs but its fine and feels very positive Quote Link to comment Share on other sites More sharing options...
Mice! Posted April 20, 2018 Report Share Posted April 20, 2018 belting i was wondering how you were going to do it. Quote Link to comment Share on other sites More sharing options...
Ultrastu Posted April 20, 2018 Author Report Share Posted April 20, 2018 Cheers this is the latest incarnation Mk6 ? Anyway its not as positive as a straight bar. But it does make more room for the pistol grip and should allow the stock to fix onto the bolt easier . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.