Peter Baw Posted November 28, 2020 Report Share Posted November 28, 2020 Hi I need some help please, I have been given a Logun Rifle, the name is what it says on the side of the air rifle I want to replace all the seals, but I can find this model anywhere on the other side it says S.W.P 3000 psi CAL .22 The gun itself is in very good condition, and I only need this for indoor target shooting so its a shame to let it go to waste. Thanks Peter Quote Link to comment Share on other sites More sharing options...
B725 Posted November 28, 2020 Report Share Posted November 28, 2020 7 minutes ago, Peter Baw said: Hi I need some help please, I have been given a Logun Rifle, the name is what it says on the side of the air rifle I want to replace all the seals, but I can find this model anywhere on the other side it says S.W.P 3000 psi CAL .22 The gun itself is in very good condition, and I only need this for indoor target shooting so its a shame to let it go to waste. Thanks Peter Some pictures might help. Quote Link to comment Share on other sites More sharing options...
Peter Baw Posted November 28, 2020 Author Report Share Posted November 28, 2020 Hi B725 See attached Peter Quote Link to comment Share on other sites More sharing options...
B725 Posted November 28, 2020 Report Share Posted November 28, 2020 (edited) It looks like a MK1 Is it the same as this on the other side. Edited November 28, 2020 by B725 Quote Link to comment Share on other sites More sharing options...
Peter Baw Posted November 28, 2020 Author Report Share Posted November 28, 2020 Yes the very same, so this now leads to another question I can find parts for MK2 fairly easy for MK1 not so easy I take Valve seals for MK2 and so on wont be compatible for MK1, is it worth replacing them or leave as is? As I don't know when anything was replaced on this Peter Quote Link to comment Share on other sites More sharing options...
B725 Posted November 28, 2020 Report Share Posted November 28, 2020 Is the gun not working ? There are some MK1 / MK2 seal kits on the bay for a tenner with a tube of grease. Quote Link to comment Share on other sites More sharing options...
Mice! Posted November 28, 2020 Report Share Posted November 28, 2020 Chances are it's the same as an Axsor. https://www.airgunforum.co.uk/community/index.php?threads/logun-axsor-complete-stripdown-guide.89256/ A fantastic break down, although I just sent mine away to get sorted. Quote Link to comment Share on other sites More sharing options...
Peter Baw Posted November 28, 2020 Author Report Share Posted November 28, 2020 13 minutes ago, B725 said: Is the gun not working ? There are some MK1 / MK2 seal kits on the bay for a tenner with a tube of grease. It seems to work ok? it is more a precautionary measure going to have a look on bay 🙂 Quote Link to comment Share on other sites More sharing options...
B725 Posted November 28, 2020 Report Share Posted November 28, 2020 I have the Logun Axor and its been superb. Quote Link to comment Share on other sites More sharing options...
royden Posted November 29, 2020 Report Share Posted November 29, 2020 There is a guy near Hednesford Staffordshire goes under the name of the Airgundoctor who i believe worked for Logun that may help. His number is 01543876800. I bought a Mk11 off him over ten years ago that i still have and never had a moments trouble with it. Good luck. Quote Link to comment Share on other sites More sharing options...
snarepeg Posted November 29, 2020 Report Share Posted November 29, 2020 Nice magazine system with the right pellets. easy to set up, found crossman premier worked well, there is an adjuster for pellet length. Quote Link to comment Share on other sites More sharing options...
figgy Posted November 29, 2020 Report Share Posted November 29, 2020 On the airgun forum a chap called the Logunator is your man for all things Logun. Quote Link to comment Share on other sites More sharing options...
rellum Posted December 5, 2020 Report Share Posted December 5, 2020 Yep contact @Logun-ator (Mick) on the AGF he did both of mine (Mk1s) He is the resident Logun Specialist He also did my Axsor superb job Quote Link to comment Share on other sites More sharing options...
binxkeys Posted December 6, 2020 Report Share Posted December 6, 2020 Lucky you to be given one of these. I have a MK2 and it's fantastic. A bit marmite for some but it's superbly engineered! Quote Link to comment Share on other sites More sharing options...
strimmer_13 Posted December 6, 2020 Report Share Posted December 6, 2020 On 05/12/2020 at 11:21, rellum said: Yep contact @Logun-ator (Mick) on the AGF he did both of mine (Mk1s) He is the resident Logun Specialist He also did my Axsor superb job Hes a sound guy, resealed my fx cyclone a few months ago Quote Link to comment Share on other sites More sharing options...
binxkeys Posted December 7, 2020 Report Share Posted December 7, 2020 Thought I'd share my MK2 pro: Quote Link to comment Share on other sites More sharing options...
rellum Posted December 10, 2020 Report Share Posted December 10, 2020 On 06/12/2020 at 17:01, binxkeys said: Lucky you to be given one of these. I have a MK2 and it's fantastic. A bit marmite for some but it's superbly engineered! Yep definitely Marmite but I’ve found that most of the critics knocking them have probably never seen one never mind fired one. Stick with the pellets it’s designed for Accupell and they are usually fine and cycle correctly. Quote Link to comment Share on other sites More sharing options...
binxkeys Posted December 10, 2020 Report Share Posted December 10, 2020 2 hours ago, rellum said: Yep definitely Marmite but I’ve found that most of the critics knocking them have probably never seen one never mind fired one. Stick with the pellets it’s designed for Accupell and they are usually fine and cycle correctly. Yes that's my experience too. Few have really had a good with them and many dislike the inability to put any number of different pellets through it. Once set up properly it simply cycles like silk Quote Link to comment Share on other sites More sharing options...
Mice! Posted December 10, 2020 Report Share Posted December 10, 2020 4 hours ago, rellum said: Stick with the pellets it’s designed for Accupell and they are usually fine and cycle correctly. Not read this before, I'm about to finally put a scope on mine at the weekend hopefully, do they like the new accupells? Quote Link to comment Share on other sites More sharing options...
binxkeys Posted December 19, 2020 Report Share Posted December 19, 2020 On 10/12/2020 at 21:25, Mice! said: Not read this before, I'm about to finally put a scope on mine at the weekend hopefully, do they like the new accupells? Accupells or crossman premier as standard - though you can get replacement slip gauges for different pellets if you need to, or adjust the one you have. Quote Link to comment Share on other sites More sharing options...
Mice! Posted December 19, 2020 Report Share Posted December 19, 2020 1 minute ago, binxkeys said: Accupells or crossman premier as standard - though you can get replacement slip gauges for different pellets if you need to, or adjust the one you have. I'll have to have a proper look at things, not sure what you mean by the slip gauges, I thought it would just be pellets in and shoot like most guns. Quote Link to comment Share on other sites More sharing options...
binxkeys Posted December 19, 2020 Report Share Posted December 19, 2020 47 minutes ago, Mice! said: I'll have to have a proper look at things, not sure what you mean by the slip gauges, I thought it would just be pellets in and shoot like most guns. The pellets are loaded into an oblong magazine, and then fed in to the breach via a piece of shaped metal. This shape needs to be set to the length and, to an extent, head shape of the pellet you're using. There are three gauges available. One for accupells/premiers, one for bisley magnums and one for air Arms. They are adjustable as long the pellet head shape is roughly the same. Just put accupells in it though - it's blindingly accurate with them. Any questions just ask. I've had mine for years and like to get to know my kit very well. Quote Link to comment Share on other sites More sharing options...
Mice! Posted December 19, 2020 Report Share Posted December 19, 2020 17 minutes ago, binxkeys said: Any questions just ask. I've had mine for years and like to get to know my kit very well. Cheers will do. But the magazines I've got are round? I'll take some pictures tomorrow and have a proper look. Quote Link to comment Share on other sites More sharing options...
binxkeys Posted December 19, 2020 Report Share Posted December 19, 2020 2 hours ago, Mice! said: Cheers will do. But the magazines I've got are round? I'll take some pictures tomorrow and have a proper look. Ah, sorry. Just checked back and you have the axsor. Completely different animal rendering everything I just said irrelevant, including my ability to be a great deal of help. It's a more common rifle and almost identical to some offerings from other manufacturers including Webley. Quote Link to comment Share on other sites More sharing options...
Mice! Posted December 20, 2020 Report Share Posted December 20, 2020 11 hours ago, binxkeys said: Ah, sorry. Just checked back and you have the axsor. Completely different animal rendering everything I just said irrelevant, including my ability to be a great deal of help. It's a more common rifle and almost identical to some offerings from other manufacturers including Webley. Cheers, I was wondering if I was losing it 😄😄 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.