Jump to content

Kent velocity......noticed anything???


Recommended Posts

Took a couple of boxes home for clay bashing and although I have used them several times in the past with no issues the most recent ones are not ejecting fully.

The first ones I used had clear plastic and then the second lot had a pink cast. These ones have a blue cast in the plastic.

Its not all of them, just the odd one that pops out of the barrel when breaking but stops about half way out. They are also not clearing the barrel in my semi so result in the occasional jam.

 

Anyone else having any issues???????????

Link to comment
Share on other sites

I went through a thousand pink ones without a hitch. It's just these new blue ones that are causing the problem.

 

In fact on Sunday I still had a box of the pinks and they shot with no probs but on returning to the blue the issues started again.

Edited by Acid House
Link to comment
Share on other sites

Must be me then................ :blush:

 

I gave the guns a damed good clean after the session but wont be able to shoot again until next weekend so ill try again. It was just the fact that the pinks eject ok and the blue ones were not clearing the gun and all on the same day......... :unsure:

 

Cheers guys for the replies

 

Oh and as for the price............ I never ask. I just ask for 500 or a thou and hand over the card. It scares me if I know........... :lol:

Link to comment
Share on other sites

  • 1 year later...

Clay shooting on Sunday using Kent velocity, second batch of a 1000, first batch no problem, noticed a couple of issues with this batch, it was a cold day, on 4 traps I missed clays because of a slight delay from pulling the trigger and the cartridge firing, only a split second but caused me to drop five targets!!!

Also noticed a few not ejecting clean, had to pull them out by hand. Really annoyed about the delayed ones though, I finished third with 81 and might have won with 86!!! :yes:

Link to comment
Share on other sites

Clay shooting on Sunday using Kent velocity, second batch of a 1000, first batch no problem, noticed a couple of issues with this batch, it was a cold day, on 4 traps I missed clays because of a slight delay from pulling the trigger and the cartridge firing, only a split second but caused me to drop five targets!!!

Also noticed a few not ejecting clean, had to pull them out by hand. Really annoyed about the delayed ones though, I finished third with 81 and might have won with 86!!! :yes:

 

Not doubting your experience but if that really happened it must be reported to the manufacturer as it is positively dangerous and a potential disaster waiting to happen.

Link to comment
Share on other sites

Not doubting your experience but if that really happened it must be reported to the manufacturer as it is positively dangerous and a potential disaster waiting to happen.

 

Thought it might be a good idea to also inform Gamebore and back up the supplier, I guess they do not want a recall on a load of shells do they, so covered my you know what.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...