highland Posted January 4, 2013 Report Share Posted January 4, 2013 just a quickie i had hour to spare to day thought get bsa out try some target practice. god was it out a good two inches how can this be. can sites be out for no apparent reason. mistified big time? Quote Link to comment Share on other sites More sharing options...
Merlin64 Posted January 4, 2013 Report Share Posted January 4, 2013 I zero just before I start every hunting session , its always a bit out , due to knocks and bouncing about in the boot en route I think . Quote Link to comment Share on other sites More sharing options...
roscoc180 Posted January 4, 2013 Report Share Posted January 4, 2013 I have a Hw100 with a Leapers scope and do a bit of HFT. Used to find the same thing between meets, zero was miles out. Since I started carrying the rifle in a solid case the problem is solved, on zero every time. I think carrying it in a soft case and slinging it over my shoulder would alter the zero Quote Link to comment Share on other sites More sharing options...
evo Posted January 4, 2013 Report Share Posted January 4, 2013 its always best to put a couple of pellets through your gun before you go hunting with it,so seems a good time to zero it, because as said the slightest knock will throw your zero out Quote Link to comment Share on other sites More sharing options...
bruno22rf Posted January 4, 2013 Report Share Posted January 4, 2013 (edited) Some rifles just seem prone to this but there must be a reason-loose barrel or mounts spring to mind if the variation is windage wise or just warming up in the case of vertical stringing with a springer.Other guns,however,never seem to lose their zero,I had an S200 that retained zero for nearly 3 years and my .22 rimfire has kept its zero since I bought it-at least 15 years ago!! Edited January 4, 2013 by bruno22rf Quote Link to comment Share on other sites More sharing options...
davehiscockplumb Posted January 5, 2013 Report Share Posted January 5, 2013 I have both my hw100 fsb k and my hw99 both in prestige condition and I am so careful with them.... Same problem, however my father in law has an old gamo shadow that he keeps out in his workshop, no case just locked in a safe, it's always spot on!! The difference is mine is transported whenever I go shooting. He owns 3.5 acres and the gamo has never been transported or put in a case or slip. The other difference is he spent £40 on his old second hand gamo with tiny scope and he manages to hit everything!! Where as I would not like to begin on how much I have spent on rifles and pellets and sometimes I struggle to hit the barn door!! .... It's just not fair lol Quote Link to comment Share on other sites More sharing options...
team tractor Posted January 5, 2013 Report Share Posted January 5, 2013 Air arms s400 with niko sniper scope on it , only time its altered is when its been in the gun shop for loosing power . Not bad in 3 - 4 years Quote Link to comment Share on other sites More sharing options...
overandunder2012 Posted January 5, 2013 Report Share Posted January 5, 2013 i was forever having to zero my cometa i think its the case that was causing it Quote Link to comment Share on other sites More sharing options...
demonwolf444 Posted January 5, 2013 Report Share Posted January 5, 2013 My springers are never out but my CO2 xs78 is sometimes out by as much as an inch to the left or right, i check the zero before hunting by fireing at an empty shotgun cartridge at 35 yards. Quote Link to comment Share on other sites More sharing options...
highland Posted January 5, 2013 Author Report Share Posted January 5, 2013 thanks for the help will defo check more often Quote Link to comment Share on other sites More sharing options...
NickB65 Posted January 5, 2013 Report Share Posted January 5, 2013 I think there are two areas you need to be aware of.... 1. TRANSPORT - if possible always transport in a solid case or VERY carefully in a soft case. 2. WEATHER - if it is a little colder than when you last did a zero or a little hotter then this will affect the zero to a degree. I have a HW100T with an MTC Viper Connect scope and it rarely looses the zero but then it is transported around in a solid case and very carefully. Hope this helps. Quote Link to comment Share on other sites More sharing options...
PhillW Posted January 6, 2013 Report Share Posted January 6, 2013 I have a daystate huntsman in .22. I find that I have to zero very 3rd time I go out. I've got it down to a fine art now. I just clamp the rifle in a workmate with a towel to protect the wood and let off one round at 30yds onto a blank a4 piece of paper. Then just alter cross hairs onto the hole. I tend to put around 10 more shots to check groupings and it fine. One of the good things about a none recoiling gun.Not sure why it leaves zero but it's never by much 20 mm max. Hope this helps Quote Link to comment Share on other sites More sharing options...
Muddy Funker Posted January 7, 2013 Report Share Posted January 7, 2013 This gives me a bit of a cob on if I'm honest, It's not as though the rifles and scopes we use are made of balsa wood and fairy dust is it? I can't believe that carefully placing a gun in a case and laying on a rear seat can cause a shift in zero. It happens to me though and I'm almost fanatical about not banging my guns about. Quote Link to comment Share on other sites More sharing options...
Longbower Posted January 7, 2013 Report Share Posted January 7, 2013 Usually, its the scopes, not the rifle. some react to the slightest knock.others stay solid I have a Hawke XB30 on my crossbow that never goes out, yet the three on my air rifles constantly need to be checked and zeroed after transportation.( All in soft cases). My girlfriends S200 never goes out (Hard Case), A friend of mine was shooting his rifle with the silencer resting on a fence, and it shot 4" (100mm) high. As soon as he rested it on the stock it wasn't quite zero which shows a floating barrel does indeed float. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.