Jump to content

Recommended Posts

Hi wonder if anyone can help - Getting a 22 Hornet soon, and lots of people on these forums either have one or know about them. Was looking at a Weirauch or CZ ( there are no 527's in the country till Late Feb 2014. But will be reloading, where do people get the heads from as some research shows that lots of cast lead bullets for the Hornet are not very accurate - unless someone knows better... FYI Had to have a .22 Hornet as my land near Milton Keynes is too flat for a .223 Cheers Pete H

Link to comment
Share on other sites

hi there,

i dont have one, but my friend has the cz527, It seems good, very accurate. I think i would look at a new rifle as some of the used ones have seen alot of use. If your buying a used rifle just be awear that there are 2 types of hornet, theres the older k-hornet and the new .22 hornet.

He reolads his own to, buys the heads etc locally, using a-max i think, with ramshot powder and he uses the pistol primers instead of the small primers.

hope this helps

simon

Link to comment
Share on other sites

hi there,

i dont have one, but my friend has the cz527, It seems good, very accurate. I think i would look at a new rifle as some of the used ones have seen alot of use. If your buying a used rifle just be awear that there are 2 types of hornet, theres the older k-hornet and the new .22 hornet.

He reolads his own to, buys the heads etc locally, using a-max i think, with ramshot powder and he uses the pistol primers instead of the small primers.

hope this helps

simon

The first commercially produced 22 Hornet rifle appeared in 1932. I was under the vague impression that the "older K Hornet" was a wildcat variant of this "new 22 Hornet". Heads = bullets!

Link to comment
Share on other sites

Hi wonder if anyone can help - Getting a 22 Hornet soon, and lots of people on these forums either have one or know about them. Was looking at a Weirauch or CZ ( there are no 527's in the country till Late Feb 2014. But will be reloading, where do people get the heads from as some research shows that lots of cast lead bullets for the Hornet are not very accurate - unless someone knows better... FYI Had to have a .22 Hornet as my land near Milton Keynes is too flat for a .223 Cheers Pete H

 

Oh dear who told you that about the land? If its not safe for .223 rem to be used its not safe for Hornet either. Hornet will produce 750 ft lb of energy, in real terms not far behind .223 rem on safety considerations . Cast bullets are really just a niche that's a bit of fun / cheap practice etc. I like 45 grn Seirra Hornet Varminter bullets and a case full of LilGun should get them up to 2900 fps, Can get 3000fps with 40 grn v-max but modified magazines are required though due to the longer bullet, this bullet has a higher BC than the Seirra though I have yet to do a heap of live stuff with this bullet to comment further with any real authority.

Link to comment
Share on other sites

hi there,

i dont have one, but my friend has the cz527, It seems good, very accurate. I think i would look at a new rifle as some of the used ones have seen alot of use. If your buying a used rifle just be awear that there are 2 types of hornet, theres the older k-hornet and the new .22 hornet.

He reolads his own to, buys the heads etc locally, using a-max i think, with ramshot powder and he uses the pistol primers instead of the small primers.

hope this helps

simon

 

.22 Hornet is a direct decendant of the .22 WCF black powder round Like said early 30's. Shortly afterwards Lyle Kilburn Blew the shoulder out so it headspaced there rather than the rim and increased powder capacity slightly (making the first improved case in all probability) Performance is only maginally improved in terms of speed. Std to K versions only need a reamer in the chamber to convert

Link to comment
Share on other sites

 

.22 Hornet is a direct decendant of the .22 WCF black powder round Like said early 30's. Shortly afterwards Lyle Kilburn Blew the shoulder out so it headspaced there rather than the rim and increased powder capacity slightly (making the first improved case in all probability) Performance is only maginally improved in terms of speed. Std to K versions only need a reamer in the chamber to convert

Is it possible to headspace on the shoulder and still get proper lock-up on a rifle designed for a rimmed cartridge ?

Link to comment
Share on other sites

 

.22 Hornet is a direct decendant of the .22 WCF black powder round Like said early 30's. Shortly afterwards Lyle Kilburn Blew the shoulder out so it headspaced there rather than the rim and increased powder capacity slightly (making the first improved case in all probability) Performance is only maginally improved in terms of speed. Std to K versions only need a reamer in the chamber to convert

 

thanks kent, i didnt know that about both k and std hornet,

Very ture about the hornet and 223 being similer to,

 

atb

simon

Link to comment
Share on other sites

Hi wonder if anyone can help - Getting a 22 Hornet soon, and lots of people on these forums either have one or know about them. Was looking at a Weirauch or CZ ( there are no 527's in the country till Late Feb 2014. But will be reloading, where do people get the heads from as some research shows that lots of cast lead bullets for the Hornet are not very accurate - unless someone knows better... FYI Had to have a .22 Hornet as my land near Milton Keynes is too flat for a .223 Cheers Pete H

if you live near mk then sporting targets at risley should not be too far from you,if you get a chance pop over and go see steve in the shop he reloads for his .22 hornet and is a fountain of knowledge

 

colin

Link to comment
Share on other sites

I own this bad boy. 22 K hornet take down cased. Awsome little beauty and great calibre.

Andrew

b61bb10d9f01b70b01850fcd868210e0.jpg

d48914e3139f7eb3e2a7cd5f0f264aa6.jpg

0b4648abb73ca36a99f2842bc12217a9.jpg

That's a lovely looking gun :)

Amazed is selling his 2011 year CZ 527 in 22 Hornet, give him a bell as he needs to pay for new scope he got for his .222

Thanks pal a new owner has been secured :good:

Link to comment
Share on other sites

Thanks to all those that replied, I will have to pop over to risely to pick steves brain about reloading . Also had come to the same conclusion about buying a new gun, nice to have it confirmed though, makes it easier to get through "Management" :) Cant do anything about the land as its mine, FEO insisted that I cant shoot foxes with .22LR hence 22Hornet. But the more I read about the cartridge the more I like it, people do seem to enjoy getting the most out of it. So, thanks for help guys, if anyone has "You need to get bullet heads from there, there much cheaper comments" feel free :)

Link to comment
Share on other sites

Thanks to all those that replied, I will have to pop over to risely to pick steves brain about reloading . Also had come to the same conclusion about buying a new gun, nice to have it confirmed though, makes it easier to get through "Management" :) Cant do anything about the land as its mine, FEO insisted that I cant shoot foxes with .22LR hence 22Hornet. But the more I read about the cartridge the more I like it, people do seem to enjoy getting the most out of it. So, thanks for help guys, if anyone has "You need to get bullet heads from there, there much cheaper comments" feel free :)

 

The .22 lr bit is common practice BUT were did the land being too flat for a .223 come from?

Link to comment
Share on other sites

Too far away to tell you where to shop, but:

 

45gn Speer Spitzer, OAL 0.562", base to ogive 0.289", BC 0.167

45gn Hornady Hornet, OAL 0.616", base to ogive 0.270" BC 0.202

40gn Sierra HP #1385, OAL 0.562", base to ogive 0.238", BC 0.155 plus another Sierra 45gn bullet for which I don't have the detail but am sure Kent will help out here - any of these will do the business. Naturally there are others but I've found these to be the most widely available.

 

Should you end up with a 1 in 14 twist (the norm is 1 in 16 which across the board will handle anything up to 0.6" OAL, above 0.65" you may need the 1 in 14. As a guide, Twist Rate = 3.5 times the square root of the velocity times the bullet diameter squared all divided by the bullet OAL. Dimensions in ft/sec and inches.), then the 50gn Hornady SPSX, OAL 0.666", base to ogive 0.319", BC 0.214 is the 'all fall down' option. But due to magazine length considerations, this might possibly/probably be considered as a slack handful number loaded as a single shot option for the odd longer range shot.

 

Please note, a guide is no more than that and all dimensions will be subject to tolerances.

Link to comment
Share on other sites

Hi wonder if anyone can help - Getting a 22 Hornet soon, and lots of people on these forums either have one or know about them. Was looking at a Weirauch or CZ ( there are no 527's in the country till Late Feb 2014. But will be reloading, where do people get the heads from as some research shows that lots of cast lead bullets for the Hornet are not very accurate - unless someone knows better... FYI Had to have a .22 Hornet as my land near Milton Keynes is too flat for a .223 Cheers Pete H

 

 

What was the reasoning behind that statement?

Link to comment
Share on other sites

Lots of barrels are fussy, we all know that, same applies to all calibres. Cast lead bullets can be poor for any calibre!

 

Someone may well correct me here, and perhaps I missed comments about it somewhere above, but .22 Hornet is .223 and .224!

 

You need to be sure what you need and then find the right factory ammo or reload recipe.

 

ATB!

Link to comment
Share on other sites

Lots of barrels are fussy, we all know that, same applies to all calibres. Cast lead bullets can be poor for any calibre!

 

Someone may well correct me here, and perhaps I missed comments about it somewhere above, but .22 Hornet is .223 and .224!

 

You need to be sure what you need and then find the right factory ammo or reload recipe.

 

ATB!

Yep, earlier versions were 223 but the norm now (and has been for quite a while) is 224. The former should be avoided as the choice of ammo/bullets is very restricted

Link to comment
Share on other sites

That's one Cool Hornet! Not sure I should have shown the Brace of Pheasant by it mind :innocent: What is it? An original or conversion job?

I put a post on here about 12 months back doing the same got a right slagging of ,personally can't see a problem taking a pheasant with a rifle , plus mine was a head shot

Link to comment
Share on other sites

I put a post on here about 12 months back doing the same got a right slagging of ,personally can't see a problem taking a pheasant with a rifle , plus mine was a head shot

 

 

I new a guy who used to use his air rifle, again head shot, but agree dont see any any problem with it.

 

I been looking at the hornet to buy myself to replace my .17hmr

Link to comment
Share on other sites

I don't get it plenty of guys shoot pheasants with air rifles and rim fires. Also in the sporting pictures a guys uses his .35 cal on them no one has broken any law. http://forums.pigeonwatch.co.uk/forums/topic/265272-35cal-pheasant/

 

But for the record the pheasants were given to me by the farm shoot and just took a picture with gun.

But this on the other hand I shot a cat, horse and a duck this may well be ilegal.

Andrew

88df6c463f985a0f4cdf099100db475f.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...