biketestace Posted August 12, 2023 Report Share Posted August 12, 2023 Afternoon, Can anyone point me in the right direction to have a barrel screw cut please ? I would prefer someone you have used before, or at least seen their work ... Cheers, Paul Quote Link to comment Share on other sites More sharing options...
Scully Posted August 12, 2023 Report Share Posted August 12, 2023 Teague, but they will insist on reproofing afterwards, adding to the cost. The bloke who did ours retired some time ago; 45 quid a pop. Quote Link to comment Share on other sites More sharing options...
sam triple Posted August 12, 2023 Report Share Posted August 12, 2023 Any decent engineering firm could do this easily Quote Link to comment Share on other sites More sharing options...
Harryco Posted August 12, 2023 Report Share Posted August 12, 2023 https://www.brockandnorris.co.uk/ Quote Link to comment Share on other sites More sharing options...
biketestace Posted August 12, 2023 Author Report Share Posted August 12, 2023 17 minutes ago, sam triple said: Any decent engineering firm could do this easily I did wonder this st 👍 24 minutes ago, sam triple said: Any decent engineering firm could do this easily 6 minutes ago, Harryco said: https://www.brockandnorris.co.uk/ 👍 Thanks Quote Link to comment Share on other sites More sharing options...
Potter64 Posted August 12, 2023 Report Share Posted August 12, 2023 Steve Kershaw firearms in Howden east York’s Quote Link to comment Share on other sites More sharing options...
bluesj Posted August 12, 2023 Report Share Posted August 12, 2023 1 hour ago, sam triple said: Any decent engineering firm could do this easily Trouble is you probably won't be able to leave a gun with them Quote Link to comment Share on other sites More sharing options...
Scully Posted August 12, 2023 Report Share Posted August 12, 2023 49 minutes ago, bluesj said: Trouble is you probably won't be able to leave a gun with them I was thinking similar. Quote Link to comment Share on other sites More sharing options...
reddog Posted August 13, 2023 Report Share Posted August 13, 2023 Dave Wylde at Valkyrie is spot on.................... https://www.valkyrierifles.net/ About an hours drive straight up the M1 . Quote Link to comment Share on other sites More sharing options...
Gunman Posted August 13, 2023 Report Share Posted August 13, 2023 15 hours ago, sam triple said: Any decent engineering firm could do this easily As long as your present at the time .If not you are in contravention of the Firearms Act . Would you strip it down first ? Most guns unless the barrel is removable ,will need to be fully stripped to the barrel and action only .We took no responsibility for scopes or other bolt ons on any rifle we screw cut and asked customers to remove them . Just saying > Quote Link to comment Share on other sites More sharing options...
Bear68 Posted August 13, 2023 Report Share Posted August 13, 2023 Steve Kershaw and Neil McKillop have screwcut rifles for me to a very high standard. Quote Link to comment Share on other sites More sharing options...
biketestace Posted August 13, 2023 Author Report Share Posted August 13, 2023 3 hours ago, reddog said: Dave Wylde at Valkyrie is spot on.................... https://www.valkyrierifles.net/ About an hours drive straight up the M1 . Just emailed them 👍 Quote Link to comment Share on other sites More sharing options...
crossy 666 Posted August 14, 2023 Report Share Posted August 14, 2023 I had mine done by Norman Clark in Rugby mate not to far from you Quote Link to comment Share on other sites More sharing options...
Fargo Posted August 14, 2023 Report Share Posted August 14, 2023 Neil McKillop Basingstoke way from memory Quote Link to comment Share on other sites More sharing options...
Fil Posted August 16, 2023 Report Share Posted August 16, 2023 On 12/08/2023 at 19:25, bluesj said: Trouble is you probably won't be able to leave a gun with them Correct. On 14/08/2023 at 23:53, Fargo said: Neil McKillop Basingstoke way from memory Absolutely would recommend. If you get him to make a thread protector with it you think he's forgotten because you can't see it it is such a good fit. Quote Link to comment Share on other sites More sharing options...
biketestace Posted August 19, 2023 Author Report Share Posted August 19, 2023 On 16/08/2023 at 18:08, Fil said: Correct. Absolutely would recommend. If you get him to make a thread protector with it you think he's forgotten because you can't see it it is such a good fit. 👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.