Cosd Posted April 22, 2018 Report Share Posted April 22, 2018 (edited) Next project for the summer is the garden and the first part of the job will be a large decking area. In case it makes a difference, I'll be using composite decking boards which are 22.5mm thickness. Decking area will be around 85m/sq I don't mind going over board on the construction as I don't want to have problems later and I don't want any bounce whatsoever. Thinking to use 6"x2" treated timbers for framing, and spacing 350mm to centre's. Not decided yet, whether I should use screws or joist hangers. Not decided yet, spacing of the support posts. Not decided yet, what to use for the supports (decking will be raised approximately 15"), would 3" posts be OK? Any other considerations I need to be having? I'd appreciate any tips anyone has to offer. Edited April 22, 2018 by Cosd Quote Link to comment Share on other sites More sharing options...
Winston72 Posted April 22, 2018 Report Share Posted April 22, 2018 what will it be laid over? grass concrete tarmac etc? Quote Link to comment Share on other sites More sharing options...
Cosd Posted April 22, 2018 Author Report Share Posted April 22, 2018 (edited) 2 minutes ago, Winston72 said: what will it be laid over? grass concrete tarmac etc? the base is 5" type one MOT, note, there has been a change of plan and we was going to be laying slabs Edited April 22, 2018 by Cosd Quote Link to comment Share on other sites More sharing options...
winnie&bezza Posted April 23, 2018 Report Share Posted April 23, 2018 I’d personally try and use as less timber as you can in the ground. Did a decking job last year to replace an area that had gone rotten. The previous fitters had laid the joist in a weak mix of concrete so the timber just sucked up all the water ? I decided to use concrete lintels to lay joints on so it kept them elevated above the ground. I dug 12’’ holes at the ends and middle of the lintels and filled with concrete to give solid little footings for lintels to bed on. I could only use 4x2 joists due to back door cill height. You could up the joist depth. If you go with posts in the ground and then fit joists to the side of them, then coat the ends of posts with a bitumen before concreting then in so it gives them a longer life. It was a bloody solid structure I must say. Quote Link to comment Share on other sites More sharing options...
Cosd Posted April 23, 2018 Author Report Share Posted April 23, 2018 1 hour ago, winnie&bezza said: I’d personally try and use as less timber as you can in the ground. Did a decking job last year to replace an area that had gone rotten. The previous fitters had laid the joist in a weak mix of concrete so the timber just sucked up all the water ? I decided to use concrete lintels to lay joints on so it kept them elevated above the ground. I dug 12’’ holes at the ends and middle of the lintels and filled with concrete to give solid little footings for lintels to bed on. I could only use 4x2 joists due to back door cill height. You could up the joist depth. If you go with posts in the ground and then fit joists to the side of them, then coat the ends of posts with a bitumen before concreting then in so it gives them a longer life. It was a bloody solid structure I must say. Not planning to put any timber in the ground. The MOT will be wacked down pretty hard, and planning to put down a bed of sand and cement mix with a concrete patio slab for each post to sit on; This way posts don't sit in the ground. All sawn edges will be treated. Quote Link to comment Share on other sites More sharing options...
John_R Posted April 23, 2018 Report Share Posted April 23, 2018 Sounds a bit like how I did mine, over an old patio so no timber is in the ground. 12 years later it is still solid. Mine's about 30 sq metres and all pressure treated softwood. Quote Link to comment Share on other sites More sharing options...
oldypigeonpopper Posted April 23, 2018 Report Share Posted April 23, 2018 hello, i use to put some damp proof felt under the wood posts to stop any water ingress plus the coating of bitumen Quote Link to comment Share on other sites More sharing options...
henry d Posted April 23, 2018 Report Share Posted April 23, 2018 I used joist hangers, very easy to use. I also concreted in my posts @ 14yr ago, and last year a few decking lengths were starting to rot so I lifted them to see how things were below and the posts are fine and I had to replace 3-4 lengths of framing and just removed all the planking so it looks neat, happy days, hope yours lasts as long Quote Link to comment Share on other sites More sharing options...
AVB Posted April 23, 2018 Report Share Posted April 23, 2018 A local pest controller I know says that the rise in the popularity of decking is keeping in him business. Rats love it. 5 star accommodation for rats he calls it. Hence my wife won’t have it in the garden Any truth in that? Quote Link to comment Share on other sites More sharing options...
Dougy Posted April 23, 2018 Report Share Posted April 23, 2018 I was going to mention about putting flaps in for the traps. Quote Link to comment Share on other sites More sharing options...
Jaymo Posted April 23, 2018 Report Share Posted April 23, 2018 Ant attest to that- we only had a family of Hedgehogs setup under ours Quote Link to comment Share on other sites More sharing options...
Cosd Posted April 24, 2018 Author Report Share Posted April 24, 2018 18 hours ago, AVB said: A local pest controller I know says that the rise in the popularity of decking is keeping in him business. Rats love it. 5 star accommodation for rats he calls it. Hence my wife won’t have it in the garden Any truth in that? The majority of my decking will be surrounded with brickwork; The little which isn't am planning to take precautions over this. WIth 5mm spacing on the deck I guess should keep rats out, and will be ensuring no gaps left around edges. Any other tips for keeping them out? Maybe making solid sides around the edges? Quote Link to comment Share on other sites More sharing options...
Jbob Posted April 24, 2018 Report Share Posted April 24, 2018 (edited) On 22/04/2018 at 22:59, Cosd said: ...... Not decided yet, what to use for the supports (decking will be raised approximately 15"), would 3" posts be OK? ..... Believe it or not decking, verandahs and balconies etc require planning permission if they are above 30cm above the ground. Its on planning portal. https://interactive.planningportal.co.uk/detached-house/outside/decking Apologies in advance for being ackward Edited April 24, 2018 by Jbob Additional information Quote Link to comment Share on other sites More sharing options...
hodge911 Posted April 29, 2018 Report Share Posted April 29, 2018 I did my sisters a while back in between hers and next door caravan all tantalised wood laid on prepped ground ie dug out 4" of dolomite medium wacked down to allow drainage then heavy gauge weed membrane . framing is at 16" centres tanalized Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.