ditchman Posted June 26, 2016 Report Share Posted June 26, 2016 whats the best price...you boys can get this for/sheet................had a breif look about and seems quite expensive.......... Quote Link to comment Share on other sites More sharing options...
oowee Posted June 26, 2016 Report Share Posted June 26, 2016 whats the best price...you boys can get this for/sheet................had a breif look about and seems quite expensive.......... I cant believe how expensive all metal sheet material is. I bought coated box profile sheets of e bay. They came from a guy in wales. There were so many different grades and coatings that it was hard to compare like with like. Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 26, 2016 Author Report Share Posted June 26, 2016 when i get my internet speed back...(used my allowance this mth') i will have a trawl round...............i think there are 2 types galvinised electroplated and there used to be reclamained that had been re-dipped............ Quote Link to comment Share on other sites More sharing options...
TIGHTCHOKE Posted June 26, 2016 Report Share Posted June 26, 2016 Si, have you considered Corrugated Bitumen Sheet? http://www.varicoltd.com/corrugatedbitumensheetred.html?gclid=CPq4k-3Rxc0CFbcW0wodX6IBFQ#fo_c=1345&fo_k=cabcaabb90a7af85a123ed656b433918&fo_s=gplauk Quote Link to comment Share on other sites More sharing options...
shoot and be safe Posted June 26, 2016 Report Share Posted June 26, 2016 Have a look around the reclamation yards. There was one local to me that bought "seconds" (slight damage where a forklift had knocked into the stack, to a slight rust patch at one end) from the manufacturer by the artic load and sold them at less than half price. Sadly he died a while ago and the yard closedown. Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 26, 2016 Author Report Share Posted June 26, 2016 Si, have you considered Corrugated Bitumen Sheet? http://www.varicoltd.com/corrugatedbitumensheetred.html?gclid=CPq4k-3Rxc0CFbcW0wodX6IBFQ#fo_c=1345&fo_k=cabcaabb90a7af85a123ed656b433918&fo_s=gplauk that is what i want to replace with ...corrugated iron............when i bought it 9 years ago ..it said it was good for 15 years.....it is well on its way out now....so im going to do what i wished i had done 9 years ago.......quite honestly i didnt have the money to use steel....and i needed to get the dogs out of the house ASAP ...8 gundogs in a small house gets to be a trail !!!....so thats how i ended up using bitumen corrugated sheet... i will try the reclaimation yards when i have finished my other jobs....... Quote Link to comment Share on other sites More sharing options...
TONY R Posted June 26, 2016 Report Share Posted June 26, 2016 Used sheets good luck with that Dont see proper corugated sheets like you nused to only seem to come accross box profile sheets these days . Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 26, 2016 Author Report Share Posted June 26, 2016 Used sheets good luck with that Dont see proper corugated sheets like you nused to only seem to come accross box profile sheets these days . what sort of price are box profile sheets.................. Quote Link to comment Share on other sites More sharing options...
fat_jay Posted June 27, 2016 Report Share Posted June 27, 2016 How many are you after? Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 27, 2016 Author Report Share Posted June 27, 2016 How many are you after? enough to do my shed roof this year sometime............. Quote Link to comment Share on other sites More sharing options...
rodp Posted June 27, 2016 Report Share Posted June 27, 2016 £7 a sheet around here. Quote Link to comment Share on other sites More sharing options...
Fisheruk Posted June 27, 2016 Report Share Posted June 27, 2016 I had s/h insulated box profile colour coat steel to cover my garage/workshop roof 15 metres long 4 metres wide for £150 collected. All went on an Ifo Williams trailer and fitted on one Saturday. Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 27, 2016 Author Report Share Posted June 27, 2016 £7 a sheet around here. £7.00/sheet ?....................what does it look like what is the cross section size what lenght ...............?.........cant get on google havnt enuff speed at the moment until my billing month starts again.. Quote Link to comment Share on other sites More sharing options...
Paddy Galore! Posted June 27, 2016 Report Share Posted June 27, 2016 my father usually has some of this knocking around, how many m2 do you need? Quote Link to comment Share on other sites More sharing options...
rodp Posted June 27, 2016 Report Share Posted June 27, 2016 £7.00/sheet ?....................what does it look like what is the cross section size what lenght ...............?.........cant get on google havnt enuff speed at the moment until my billing month starts again.. Dunno, it's advertised in the local evening paper. I'll dig it out and post the number if any interest. Quote Link to comment Share on other sites More sharing options...
rodp Posted June 27, 2016 Report Share Posted June 27, 2016 They used to make miles (literally) of the stuff just down the road. They used damaged coil, cut it to length and shove it through the rolls. The rolls press out any damage. ..................... And there's lots or coil around here, lots and lots and lots. Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 27, 2016 Author Report Share Posted June 27, 2016 (edited) my father usually has some of this knocking around, how many m2 do you need? shed roof is 6m x 4m under the existing bitumen sheet is 3/4" hoarding board............i intend to overhand frount and back by 6" (150mm) Edited June 27, 2016 by ditchman Quote Link to comment Share on other sites More sharing options...
snow white Posted June 28, 2016 Report Share Posted June 28, 2016 Farming suppliers do them cor/box profile. Quote Link to comment Share on other sites More sharing options...
Paddy Galore! Posted June 28, 2016 Report Share Posted June 28, 2016 Sorry ditchman, we were about a month too late, he's had a clear out. how about mitchells reclamation yard on duke street? Quote Link to comment Share on other sites More sharing options...
ditchman Posted June 28, 2016 Author Report Share Posted June 28, 2016 Sorry ditchman, we were about a month too late, he's had a clear out. how about mitchells reclamation yard on duke street? that was going to be my next port of call..............cheers Quote Link to comment Share on other sites More sharing options...
GingerCat Posted July 3, 2016 Report Share Posted July 3, 2016 Somewhere around 4-8 pound a sheet round this way. Made some raised beds out of it last year. Quote Link to comment Share on other sites More sharing options...
ditchman Posted July 5, 2016 Author Report Share Posted July 5, 2016 Somewhere around 4-8 pound a sheet round this way. Made some raised beds out of it last year. thats a good price in B&Q they are in excess of £25/sheet Quote Link to comment Share on other sites More sharing options...
rodp Posted July 5, 2016 Report Share Posted July 5, 2016 Advert's in again tonight, Corrugated galvanised sheets, new £7 ea, also box profile. 07834 489558 That's all it says Quote Link to comment Share on other sites More sharing options...
ditchman Posted July 5, 2016 Author Report Share Posted July 5, 2016 Advert's in again tonight, Corrugated galvanised sheets, new £7 ea, also box profile. 07834 489558 That's all it says proberly comes off a church roof............. Quote Link to comment Share on other sites More sharing options...
rodp Posted July 6, 2016 Report Share Posted July 6, 2016 proberly comes off a church roof............. Oi, we'me posh roun' 'ere, we ay got tin roovs on our churches, mind, there bay no lead lef eiver. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.