Jump to content

How many 243 rounds


Recommended Posts

And I thought things were restrictive here in the states at least in Illinois, but we don't have a limit on the amount of brass or shells we can posess. I reload (.220 Swift,223Rem,.308) and can usually attain all the components desired. Out of curiosity what do you shoot with a .243 with the 58 Vmax?

Link to comment
Share on other sites

And I thought things were restrictive here in the states at least in Illinois, but we don't have a limit on the amount of brass or shells we can posess. I reload (.220 Swift,223Rem,.308) and can usually attain all the components desired. Out of curiosity what do you shoot with a .243 with the 58 Vmax?

 

 

Fox, its a cracking round in my 10 twist Tikka stainless Varmit

Link to comment
Share on other sites

Its hard to get more than 500 to buy 600 keep in lancs, For target shooting i had over 1000 on the 308 though. Just got turned down for any more than 600 on the Hornet. To be fair its hard to get through 600 .243" very quick and if you do start to i should order a new barrel as soon as the first is fitted :yes:

Link to comment
Share on other sites

I've got buy 400 hold 500 on most of my bigger centrefires.

 

Edit... Kent - have you tried asking them if they would give you a seperate, higher hold limit on expanding missiles? They will quite often accept that you want to hold say 1000 bullets if you promise to only load a couple of hundred at any one time. :good:

Edited by njc110381
Link to comment
Share on other sites

I've got buy 400 hold 500 on most of my bigger centrefires.

 

Edit... Kent - have you tried asking them if they would give you a seperate, higher hold limit on expanding missiles? They will quite often accept that you want to hold say 1000 bullets if you promise to only load a couple of hundred at any one time. :good:

 

yes, i explained in letter that i wasn't about to load 500 in batches but wanted to buy 1000 heads at one go. Got a snotty letter back about cost not being an issue_ i never mentioned cost i mentioned being able to get what i wanted dealers dont hold a lot of hornet heads and i want to import TMS 46 grn RWS heads from Germany, there are ways round this :good:

Link to comment
Share on other sites

yes, i explained in letter that i wasn't about to load 500 in batches but wanted to buy 1000 heads at one go. Got a snotty letter back about cost not being an issue_ i never mentioned cost i mentioned being able to get what i wanted dealers dont hold a lot of hornet heads and i want to import TMS 46 grn RWS heads from Germany, there are ways round this

 

 

I don't think heads need to go on cert. I only started asking the gunshop owners to put them on after my FLO queried the "lack of use" on the .243 even though he was happy enough when i explained i was home loading. :good:

 

Forgot to post, .22rf = 500/600

.17hmr = 500/600

.22-250 = 200/300

.243 = 200/300

Edited by hambone
Link to comment
Share on other sites

buy 400 hold 400 just got 57 vmax heads to reload not had them out on any foxes yet i,v done my back in IAN

 

Thats abit of a strange ammount as you will have to use every round until you can purchase any more. Hopefully you dont need them in a hurry.

 

yes, i explained in letter that i wasn't about to load 500 in batches but wanted to buy 1000 heads at one go. Got a snotty letter back about cost not being an issue_ i never mentioned cost i mentioned being able to get what i wanted dealers dont hold a lot of hornet heads and i want to import TMS 46 grn RWS heads from Germany, there are ways round this

 

 

I don't think heads need to go on cert. I only started asking the gunshop owners to put them on after my FLO queried the "lack of use" on the .243 even though he was happy enough when i explained i was home loading. :good:

 

Expanding heads usually get recorded onto the back of your fac, or atleast in my area they do although I have heard of shops that don't bother.

 

Nearly forgot I also have buy 200 hold 300 for my 243.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...