Jump to content

im mainly re-building a .....


ditchman
 Share

Recommended Posts

  • Replies 125
  • Created
  • Last Reply

Top Posters In This Topic

Had another look at the finish of the cherub.............im just getting too anal............its not perfect so i stripped it off again:mad:

the original size i have was too think....so i thinned it down a fair bit...the results were much better....but being a pva/polymer acrylic it dosnt truly go off and hard....so when it comes to buffing it up there is still a bit of movement underneath...which results in a poor finish.........

so anyway i have ordered up some shellac flakes and i will mix it with methyalated spirits and use that ........as it goes glass hard very quickly.

did a quick test with some button polish i have which contains shellac...and that works supremly well...

its all stop start on this post

Link to comment
Share on other sites

39 minutes ago, 7daysinaweek said:

Fantastic work Ditchy which shows through in your 'diligence!'

I can see it now in gold neon 'Ditchmans Nail Fettling Emporium', "what say you?"

depends what the women want fettling........

Link to comment
Share on other sites

3 minutes ago, mel b3 said:

Yep,  a gentle stroke with a soft brush is all it takes 😊

i bow to your extensive experience............i shall bear it in mind for the future

 

 

my shellac should soon be here  so i shall resume normal service.........twince i have stripped that leaf off

Link to comment
Share on other sites

making slow progress..........applying leaf to intricate mouldings now......going thro a sucession of 4 brushes  softest first ending with the harder one when the size has almost stabilized..find it easier to do a bit at a time.....

  1. apply thinned size 
  2. leave for 20 mins
  3. apply (place) leaf
  4. gently push into place with softest brush
  5. leave 1/2 hour
  6. use diffent brush to flattern down
  7. leave for 1/2 hour
  8. use another brush to pick out the shape and detail
  9. use another brush to flattern and polish and remove small excess

 

this will be polished again in a couple of days when the size is stable and hard

gold 6 001tn_.JPG

gold 6 002tn_.JPG

gold 6 003tn_.JPG

gold 6 004tn_.JPG

gold 6 005tn_.JPG

gold 6 006tn_.JPG

gold 6 007tn_.JPG

gold 6 008tn_.JPG

gold 6 009tn_.JPG

gold 6 010tn_.JPG

gold 6 011tn_.JPG

Link to comment
Share on other sites

35 minutes ago, TIGHTCHOKE said:

Lovely!

Interesting that you are using softest brush and getting progressively firmer.

 

I notice you are working on an old pairs of Fat Sarah's jeans.

as the size gets harder you can use a firmer brush.....if you start with a firm bristle brush it will 

  1. tear the leaf
  2. deform the size underneath

 

Link to comment
Share on other sites

4 hours ago, TIGHTCHOKE said:

 

 

 

I notice you are working on an old pairs of Fat Sarah's jeans.

Also I spy an Opinel without an antler handle.

You really must make and keep one for yourself.

2 hours ago, 7daysinaweek said:

You have the 'patience of a saint' Ditchy.

This going to look superb!

Totally agree. Will look terrific. Superb work.

Edited by Old Boggy
Link to comment
Share on other sites

Many moons ago, over 70yrs to be precise, I did a small amount of gold leaf work on some scultures we hwere doing in 6th Form Art.  Believe me very small amount and I would not want to be attempting what you are doing and doing well I might add.   The finished article will be a glory to see I am sure. Look forwrd to it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...