turbo33 Posted January 19, 2021 Report Share Posted January 19, 2021 (edited) Interesting device! Obviously not for those with a need for large output. Seems from the replies in the comments, that it comes with 12 and 20gauge die sets and he's looking to do 410 soon. Cheap enough at £26, but then rises to £48 with the postage. Anyway, thought i'd pop it on for interest. Edited January 19, 2021 by turbo33 Quote Link to comment Share on other sites More sharing options...
Rob85 Posted January 19, 2021 Report Share Posted January 19, 2021 Theres one very similar to that from Russian, think it's on ebay for a little bit cheaper, for doing small batches its probably good enough to get the job done Quote Link to comment Share on other sites More sharing options...
Walker570 Posted January 19, 2021 Report Share Posted January 19, 2021 Looks like that is from similar location. Yes, will do the job, time and patience all that is needed. Quote Link to comment Share on other sites More sharing options...
islandgun Posted January 19, 2021 Report Share Posted January 19, 2021 (edited) Crimper really, shame its not in a 10g flavour as member Ttfjlc would snap it up Edited January 19, 2021 by islandgun Quote Link to comment Share on other sites More sharing options...
Ttfjlc Posted January 19, 2021 Report Share Posted January 19, 2021 2 hours ago, islandgun said: Crimper really, shame its not in a 10g flavour as member Ttfjlc would snap it up Indeed mate I would for a price like that, the Lee loader on eBay I could get for £145 🙄 Quote Link to comment Share on other sites More sharing options...
islandgun Posted January 19, 2021 Report Share Posted January 19, 2021 2 hours ago, Ttfjlc said: Indeed mate I would for a price like that, the Lee loader on eBay I could get for £145 🙄 American ebay ? my collection's value just went up..😉 Quote Link to comment Share on other sites More sharing options...
222mark Posted January 19, 2021 Report Share Posted January 19, 2021 Where can you buy this loader from? cheers Quote Link to comment Share on other sites More sharing options...
Ttfjlc Posted January 19, 2021 Report Share Posted January 19, 2021 40 minutes ago, islandgun said: American ebay ? my collection's value just went up..😉 this side of the pond mate, up for £175, tried a lower offer which was when I received the counter offer of £145, not going anywhere near that Quote Link to comment Share on other sites More sharing options...
islandgun Posted January 19, 2021 Report Share Posted January 19, 2021 2 hours ago, Ttfjlc said: this side of the pond mate, up for £175, tried a lower offer which was when I received the counter offer of £145, not going anywhere near that Are other gauges fetching the same ? You might try and get a crimp starter and a cone shaped metal tune because thats all it is, or RTO..👍 Quote Link to comment Share on other sites More sharing options...
Ttfjlc Posted January 19, 2021 Report Share Posted January 19, 2021 1 minute ago, islandgun said: Are other gauges fetching the same ? You might try and get a crimp starter and a cone shaped metal tune because thats all it is, or RTO..👍 Prices are all over the place, they do not seem to be fetching as much as the relatively scarce 10, I've emailed the maker of this product hoping they may make a 10 bore version Quote Link to comment Share on other sites More sharing options...
Steve brownell Posted January 21, 2021 Report Share Posted January 21, 2021 Looks good maybe for wildfowl/waterfowl but I don’t think he had enough shot in it as the crimp looked low lol 😂 Quote Link to comment Share on other sites More sharing options...
derbyduck Posted January 22, 2021 Report Share Posted January 22, 2021 On 19/01/2021 at 19:39, 222mark said: Where can you buy this loader from? cheers Hi iv'e just been on Amazon UK and you can get a Leeload All for £74.50p free delivery get it tomorrow . Quote Link to comment Share on other sites More sharing options...
DUNKS Posted January 22, 2021 Report Share Posted January 22, 2021 With no hoppers dont forget the guy is measuring out every load as well. Think I will stick with my old Lee. Quote Link to comment Share on other sites More sharing options...
turbo33 Posted January 22, 2021 Author Report Share Posted January 22, 2021 Agreed Dunks. The Lee press is tremendous value for money, and does a great job. At around £20 for a calibre change of dies, its so versatile. Its just a shame that you can't get a 410 conversion set for it. I'm just guessing that part of the reason, is that for the small ball powders like SP3, the seal from the charge bar may not be effective enough? Quote Link to comment Share on other sites More sharing options...
HW95J Posted January 22, 2021 Report Share Posted January 22, 2021 These look very interesting, as noted above they look like a much better quality version of others available on Ebay. My loading set-up is very primitive as it is so this would be an upgrade! Doesn't take up much space, quiet, looks ideal for small volumes of reloading. Seriously tempted to buy one for 20 bore Quote Link to comment Share on other sites More sharing options...
222mark Posted January 22, 2021 Report Share Posted January 22, 2021 6 hours ago, derbyduck said: Hi iv'e just been on Amazon UK and you can get a Leeload All for £74.50p free delivery get it tomorrow . Just sold one mate. I liked the look of this and wondered if they did it in .410. I've emailed the guy but had no response, Quote Link to comment Share on other sites More sharing options...
HW95J Posted January 23, 2021 Report Share Posted January 23, 2021 Placed an order, will update when arrived (probably around a month's time!) Quote Link to comment Share on other sites More sharing options...
turbo33 Posted January 23, 2021 Author Report Share Posted January 23, 2021 (edited) On 21/01/2021 at 23:05, Steve brownell said: Looks good maybe for wildfowl/waterfowl but I don’t think he had enough shot in it as the crimp looked low lol 😂 How are you doing Steve, all good I hope. Yes I agree, crimp is low. Needs the wad stack higher, packing out the wad side not the powder side as he did. 👍 Edited January 23, 2021 by turbo33 Quote Link to comment Share on other sites More sharing options...
Steve brownell Posted January 23, 2021 Report Share Posted January 23, 2021 Hello matey I’m all good thanks yeah amateurs aye lol Quote Link to comment Share on other sites More sharing options...
snarepeg Posted January 24, 2021 Report Share Posted January 24, 2021 On 22/01/2021 at 16:32, 222mark said: Just sold one mate. I liked the look of this and wondered if they did it in .410. I've emailed the guy but had no response, 12 hours ago, turbo33 said: How are you doing Steve, all good I hope. Yes I agree, crimp is low. Needs the wad stack higher, packing out the wad side not the powder side as he did. 👍 On 22/01/2021 at 16:32, 222mark said: Just sold one mate. I liked the look of this and wondered if they did it in .410. I've emailed the guy but had no response, Starting up again Mark? Quote Link to comment Share on other sites More sharing options...
222mark Posted January 28, 2021 Report Share Posted January 28, 2021 On 24/01/2021 at 10:59, snarepeg said: Starting up again Mark? Just fancied doing the odd few .410's again John. I'm really enjoying shooting the Browning .410. Quote Link to comment Share on other sites More sharing options...
HW95J Posted February 6, 2021 Report Share Posted February 6, 2021 Well the last tracking info for mine was earlier in the week when it was being prepared to leave Russia having cleared customs. Assuming it'll be here in 2 weeks or so. I'll post pictures once it's here Quote Link to comment Share on other sites More sharing options...
Guest cookoff013 Posted February 7, 2021 Report Share Posted February 7, 2021 Cool. Quote Link to comment Share on other sites More sharing options...
HW95J Posted February 16, 2021 Report Share Posted February 16, 2021 Here it is! Just arrived today which makes it about 3 weeks delivery time. I seem to have a missing component (second bolt and c-clip that should go into that hole in the arm) but I think it'll function enough to try it out. Have emailed to see what the situation is with this. I'll do a full review once I've played about with it but initial impressions: Functionality - this should in theory prime/deprime, star crimp and re-size 20 bore cartridges Comes completely disassembled with no assembly instructions. Not too difficult to work out how to put together fortunately but you do need to identify which component does what, they're not marked at all. Top row are the three pieces for crimping, bottom row is a collar for the cartridge, resizer and a piece that seems to be used in an alternative way of 'Speed Sizing and Depriming' (instructions not too clear on this). Instructions for use are a little vague and the picture quality isn't fantastic so I'd suggest working from their video instead Base is injection moulded plastic as is the rotating surface that the arm pushes onto. Everything else is metal aside from wooden handle. Metal components are pretty roughly finished but seem robust. There are two holes in base to fix to a bench but three wood screws included... 🤔 You store some components (decapping pin and re-capping support) by screwing into the base when not in use You would need to run batches i.e de-prime everything, re-prime and then set up for crimping by removing the pin and support from the central position on the base. Quote Link to comment Share on other sites More sharing options...
HW95J Posted February 16, 2021 Report Share Posted February 16, 2021 Update - It's missing two components. A disc and a bolt that go on the arm and push down onto the plastic surface. Without these the height is wrong so can't crimp anything unfortunately. Will try and sort via email with the seller! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.